UoN / SACAMOS

Commit 9f62fb997ae9d79fda361b37bc630d14fc479159

Authored by Chris Smartt
1 parent 2b58f1d5
Exists in master and in 3 other branches nested_overshields, proximity_effects, v4

Corrections to User Guide

Showing 13 changed files with 265 additions and 248 deletions   Show diff stats
Inline Side-by-side
DOCUMENTATION/SACAMOS_UserGuide.pdf
View file @9f62fb9
No preview for this file type
DOCUMENTATION/THEORY_MANUAL/Imgs/scenario-eps-converted-to.pdf deleted
View file @2b58f1d
No preview for this file type
DOCUMENTATION/USER_GUIDE/Imgs/Coax2.eps
  Diff comments   View file @9f62fb9
1 %!PS-Adobe-3.0 EPSF-3.0 1 %!PS-Adobe-3.0 EPSF-3.0
2 %%BoundingBox: 57 578 451 821 2 %%BoundingBox: 57 578 451 821
3 %%Title: Coax2 3 %%Title: Coax2
4 -%%CreationDate: Wed Nov 8 14:24:23 2017 4 +%%CreationDate: Fri Jul 6 11:07:02 2018
5 %%Creator: Tgif-4.2.5-QPL written by William Chia-Wei Cheng (bill.cheng@acm.org) 5 %%Creator: Tgif-4.2.5-QPL written by William Chia-Wei Cheng (bill.cheng@acm.org)
6 %%ProducedBy: (unknown) 6 %%ProducedBy: (unknown)
7 %%Pages: 1 7 %%Pages: 1
@@ -178,7 +178,7 @@ NP @@ -178,7 +178,7 @@ NP
178 0 SG 178 0 SG
179 GS 179 GS
180 1 W 180 1 W
181 - 465 255 M 181 + 455 255 M
182 GS 182 GS
183 0 SG 183 0 SG
184 /Courier FF [14 0 0 -14 0 0] MS 184 /Courier FF [14 0 0 -14 0 0] MS
@@ -269,7 +269,7 @@ NP @@ -269,7 +269,7 @@ NP
269 0 SG 269 0 SG
270 GS 270 GS
271 1 W 271 1 W
272 - 570 155 M 272 + 575 150 M
273 GS 273 GS
274 0 SG 274 0 SG
275 /Courier FF [14 0 0 -14 0 0] MS 275 /Courier FF [14 0 0 -14 0 0] MS
@@ -514,6 +514,6 @@ end @@ -514,6 +514,6 @@ end
514 showpage 514 showpage
515 515
516 %%Trailer 516 %%Trailer
517 -%MatchingCreationDate: Wed Nov 8 14:24:23 2017 517 +%MatchingCreationDate: Fri Jul 6 11:07:02 2018
518 %%DocumentFonts: Courier 518 %%DocumentFonts: Courier
519 %%EOF 519 %%EOF
DOCUMENTATION/USER_GUIDE/Imgs/Coax2.obj
  Diff comments   View file @9f62fb9
@@ -66,11 +66,11 @@ spline_tightness(1). @@ -66,11 +66,11 @@ spline_tightness(1).
66 page(1,"",1,''). 66 page(1,"",1,'').
67 oval('Black','',357,157,468,263,0,3,1,0,0,0,0,0,0,'3',0,[ 67 oval('Black','',357,157,468,263,0,3,1,0,0,0,0,0,0,'3',0,[
68 ]). 68 ]).
69 -text('Black',230,437,1,0,1,378,16,27,13,3,0,0,0,0,-65534,378,16,0,0,"",0,0,0,0,450,'',[  
70 -minilines(378,16,0,0,0,0,0,[  
71 -mini_line(378,13,3,0,0,0,[  
72 -str_block(0,378,13,3,0,-8,0,0,0,[  
73 -str_seg('Black','Courier',0,80640,378,13,3,0,-8,0,0,0,0,0, 69 +text('Black',230,438,1,0,1,378,15,27,12,3,0,0,0,0,-65534,378,15,0,0,"",0,0,0,0,450,'',[
  70 +minilines(378,15,0,0,0,0,0,[
  71 +mini_line(378,12,3,0,0,0,[
  72 +str_block(0,378,12,3,0,-8,0,0,0,[
  73 +str_seg('Black','Courier',0,80640,378,12,3,0,-8,0,0,0,0,0,
74 "Coaxial cable with surface impedance loss ")]) 74 "Coaxial cable with surface impedance loss ")])
75 ]) 75 ])
76 ])]). 76 ])]).
@@ -79,21 +79,21 @@ poly('Black','',2,[ @@ -79,21 +79,21 @@ poly('Black','',2,[
79 "0","",[ 79 "0","",[
80 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 80 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
81 ]). 81 ]).
82 -text('Black',465,242,3,0,1,81,48,173,13,3,0,0,0,0,-65534,81,48,0,0,"",0,0,0,0,255,'',[  
83 -minilines(81,48,0,0,0,0,0,[  
84 -mini_line(54,13,3,0,0,0,[  
85 -str_block(0,54,13,3,0,-8,0,0,0,[  
86 -str_seg('Black','Courier',0,80640,54,13,3,0,-8,0,0,0,0,0, 82 +text('Black',455,243,3,0,1,81,45,173,12,3,0,0,0,0,-65534,81,45,0,0,"",0,0,0,0,255,'',[
  83 +minilines(81,45,0,0,0,0,0,[
  84 +mini_line(54,12,3,0,0,0,[
  85 +str_block(0,54,12,3,0,-8,0,0,0,[
  86 +str_seg('Black','Courier',0,80640,54,12,3,0,-8,0,0,0,0,0,
87 "Inner ")]) 87 "Inner ")])
88 ]), 88 ]),
89 -mini_line(81,13,3,0,0,0,[  
90 -str_block(0,81,13,3,0,-1,0,0,0,[  
91 -str_seg('Black','Courier',0,80640,81,13,3,0,-1,0,0,0,0,0, 89 +mini_line(81,12,3,0,0,0,[
  90 +str_block(0,81,12,3,0,-1,0,0,0,[
  91 +str_seg('Black','Courier',0,80640,81,12,3,0,-1,0,0,0,0,0,
92 "conductor")]) 92 "conductor")])
93 ]), 93 ]),
94 -mini_line(63,13,3,0,0,0,[  
95 -str_block(0,63,13,3,0,-2,0,0,0,[  
96 -str_seg('Black','Courier',0,80640,63,13,3,0,-2,0,0,0,0,0, 94 +mini_line(63,12,3,0,0,0,[
  95 +str_block(0,63,12,3,0,-2,0,0,0,[
  96 +str_seg('Black','Courier',0,80640,63,12,3,0,-2,0,0,0,0,0,
97 " radius")]) 97 " radius")])
98 ]) 98 ])
99 ])]). 99 ])]).
@@ -104,31 +104,31 @@ poly('Black','',2,[ @@ -104,31 +104,31 @@ poly('Black','',2,[
104 "0","",[ 104 "0","",[
105 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 105 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
106 ]). 106 ]).
107 -text('Black',515,27,3,0,1,90,48,198,13,3,0,0,0,0,-65534,90,48,0,0,"",0,0,0,0,40,'',[  
108 -minilines(90,48,0,0,0,0,0,[  
109 -mini_line(54,13,3,0,0,0,[  
110 -str_block(0,54,13,3,0,-8,0,0,0,[  
111 -str_seg('Black','Courier',0,80640,54,13,3,0,-8,0,0,0,0,0, 107 +text('Black',515,28,3,0,1,90,45,198,12,3,0,0,0,0,-65534,90,45,0,0,"",0,0,0,0,40,'',[
  108 +minilines(90,45,0,0,0,0,0,[
  109 +mini_line(54,12,3,0,0,0,[
  110 +str_block(0,54,12,3,0,-8,0,0,0,[
  111 +str_seg('Black','Courier',0,80640,54,12,3,0,-8,0,0,0,0,0,
112 "Outer ")]) 112 "Outer ")])
113 ]), 113 ]),
114 -mini_line(90,13,3,0,0,0,[  
115 -str_block(0,90,13,3,0,-1,0,0,0,[  
116 -str_seg('Black','Courier',0,80640,90,13,3,0,-1,0,0,0,0,0, 114 +mini_line(90,12,3,0,0,0,[
  115 +str_block(0,90,12,3,0,-1,0,0,0,[
  116 +str_seg('Black','Courier',0,80640,90,12,3,0,-1,0,0,0,0,0,
117 "dielectric")]) 117 "dielectric")])
118 ]), 118 ]),
119 -mini_line(54,13,3,0,0,0,[  
120 -str_block(0,54,13,3,0,-2,0,0,0,[  
121 -str_seg('Black','Courier',0,80640,54,13,3,0,-2,0,0,0,0,0, 119 +mini_line(54,12,3,0,0,0,[
  120 +str_block(0,54,12,3,0,-2,0,0,0,[
  121 +str_seg('Black','Courier',0,80640,54,12,3,0,-2,0,0,0,0,0,
122 "radius")]) 122 "radius")])
123 ]) 123 ])
124 ])]). 124 ])]).
125 oval('Black','',250,50,580,370,0,1,1,200,0,0,0,0,0,'1',0,[ 125 oval('Black','',250,50,580,370,0,1,1,200,0,0,0,0,0,'1',0,[
126 ]). 126 ]).
127 -text('Black',570,142,1,0,1,117,16,211,13,3,0,0,0,0,-65534,117,16,0,0,"",0,0,0,0,155,'',[  
128 -minilines(117,16,0,0,0,0,0,[  
129 -mini_line(117,13,3,0,0,0,[  
130 -str_block(0,117,13,3,0,-2,0,0,0,[  
131 -str_seg('Black','Courier',0,80640,117,13,3,0,-2,0,0,0,0,0, 127 +text('Black',575,138,1,0,1,117,15,211,12,3,0,0,0,0,-65534,117,15,0,0,"",0,0,0,0,150,'',[
  128 +minilines(117,15,0,0,0,0,0,[
  129 +mini_line(117,12,3,0,0,0,[
  130 +str_block(0,117,12,3,0,-2,0,0,0,[
  131 +str_seg('Black','Courier',0,80640,117,12,3,0,-2,0,0,0,0,0,
132 "Shield radius")]) 132 "Shield radius")])
133 ]) 133 ])
134 ])]). 134 ])]).
@@ -137,29 +137,29 @@ poly('Black','',2,[ @@ -137,29 +137,29 @@ poly('Black','',2,[
137 "0","",[ 137 "0","",[
138 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 138 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
139 ]). 139 ]).
140 -text('Black',570,82,2,0,1,189,32,217,13,3,0,0,0,0,-65534,189,32,0,0,"",0,0,0,0,95,'',[  
141 -minilines(189,32,0,0,0,0,0,[  
142 -mini_line(144,13,3,0,0,0,[  
143 -str_block(0,144,13,3,0,-1,0,0,0,[  
144 -str_seg('Black','Courier',0,80640,144,13,3,0,-1,0,0,0,0,0, 140 +text('Black',570,83,2,0,1,189,30,217,12,3,0,0,0,0,-65534,189,30,0,0,"",0,0,0,0,95,'',[
  141 +minilines(189,30,0,0,0,0,0,[
  142 +mini_line(144,12,3,0,0,0,[
  143 +str_block(0,144,12,3,0,-1,0,0,0,[
  144 +str_seg('Black','Courier',0,80640,144,12,3,0,-1,0,0,0,0,0,
145 "Outer dielectric")]) 145 "Outer dielectric")])
146 ]), 146 ]),
147 -mini_line(189,13,3,0,0,0,[  
148 -str_block(0,189,13,3,0,-1,0,0,0,[  
149 -str_seg('Black','Courier',0,80640,189,13,3,0,-1,0,0,0,0,0, 147 +mini_line(189,12,3,0,0,0,[
  148 +str_block(0,189,12,3,0,-1,0,0,0,[
  149 +str_seg('Black','Courier',0,80640,189,12,3,0,-1,0,0,0,0,0,
150 "relative permittivity")]) 150 "relative permittivity")])
151 ]) 151 ])
152 ])]). 152 ])]).
153 -text('Black',595,217,2,0,1,189,32,218,13,3,0,0,0,0,-65534,189,32,0,0,"",0,0,0,0,230,'',[  
154 -minilines(189,32,0,0,0,0,0,[  
155 -mini_line(144,13,3,0,0,0,[  
156 -str_block(0,144,13,3,0,-1,0,0,0,[  
157 -str_seg('Black','Courier',0,80640,144,13,3,0,-1,0,0,0,0,0, 153 +text('Black',595,218,2,0,1,189,30,218,12,3,0,0,0,0,-65534,189,30,0,0,"",0,0,0,0,230,'',[
  154 +minilines(189,30,0,0,0,0,0,[
  155 +mini_line(144,12,3,0,0,0,[
  156 +str_block(0,144,12,3,0,-1,0,0,0,[
  157 +str_seg('Black','Courier',0,80640,144,12,3,0,-1,0,0,0,0,0,
158 "Inner dielectric")]) 158 "Inner dielectric")])
159 ]), 159 ]),
160 -mini_line(189,13,3,0,0,0,[  
161 -str_block(0,189,13,3,0,-1,0,0,0,[  
162 -str_seg('Black','Courier',0,80640,189,13,3,0,-1,0,0,0,0,0, 160 +mini_line(189,12,3,0,0,0,[
  161 +str_block(0,189,12,3,0,-1,0,0,0,[
  162 +str_seg('Black','Courier',0,80640,189,12,3,0,-1,0,0,0,0,0,
163 "relative permittivity")]) 163 "relative permittivity")])
164 ]) 164 ])
165 ])]). 165 ])]).
@@ -178,11 +178,11 @@ poly('Black','',2,[ @@ -178,11 +178,11 @@ poly('Black','',2,[
178 "0","",[ 178 "0","",[
179 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 179 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
180 ]). 180 ]).
181 -text('Black',105,202,1,0,1,126,16,291,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,215,'',[  
182 -minilines(126,16,0,0,0,0,0,[  
183 -mini_line(126,13,3,0,0,0,[  
184 -str_block(0,126,13,3,0,-3,0,0,0,[  
185 -str_seg('Black','Courier',0,80640,126,13,3,0,-3,0,0,0,0,0, 181 +text('Black',105,203,1,0,1,126,15,291,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,215,'',[
  182 +minilines(126,15,0,0,0,0,0,[
  183 +mini_line(126,12,3,0,0,0,[
  184 +str_block(0,126,12,3,0,-3,0,0,0,[
  185 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
186 "Conductor No 1")]) 186 "Conductor No 1")])
187 ]) 187 ])
188 ])]). 188 ])]).
@@ -191,19 +191,19 @@ poly('Black','',2,[ @@ -191,19 +191,19 @@ poly('Black','',2,[
191 "0","",[ 191 "0","",[
192 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 192 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
193 ]). 193 ]).
194 -text('Black',115,322,1,0,1,126,16,293,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,335,'',[  
195 -minilines(126,16,0,0,0,0,0,[  
196 -mini_line(126,13,3,0,0,0,[  
197 -str_block(0,126,13,3,0,-2,0,0,0,[  
198 -str_seg('Black','Courier',0,80640,126,13,3,0,-2,0,0,0,0,0, 194 +text('Black',115,323,1,0,1,126,15,293,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,335,'',[
  195 +minilines(126,15,0,0,0,0,0,[
  196 +mini_line(126,12,3,0,0,0,[
  197 +str_block(0,126,12,3,0,-3,0,0,0,[
  198 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
199 "Conductor No 2")]) 199 "Conductor No 2")])
200 ]) 200 ])
201 ])]). 201 ])]).
202 -text('Black',655,182,1,0,1,144,16,309,13,3,0,0,0,0,-65534,144,16,0,0,"",0,0,0,0,195,'',[  
203 -minilines(144,16,0,0,0,0,0,[  
204 -mini_line(144,13,3,0,0,0,[  
205 -str_block(0,144,13,3,0,-2,0,0,0,[  
206 -str_seg('Black','Courier',0,80640,144,13,3,0,-2,0,0,0,0,0, 202 +text('Black',655,183,1,0,1,144,15,309,12,3,0,0,0,0,-65534,144,15,0,0,"",0,0,0,0,195,'',[
  203 +minilines(144,15,0,0,0,0,0,[
  204 +mini_line(144,12,3,0,0,0,[
  205 +str_block(0,144,12,3,0,-2,0,0,0,[
  206 +str_seg('Black','Courier',0,80640,144,12,3,0,-2,0,0,0,0,0,
207 "Shield thickness")]) 207 "Shield thickness")])
208 ]) 208 ])
209 ])]). 209 ])]).
DOCUMENTATION/USER_GUIDE/Imgs/FD_Twisted_pair.eps
  Diff comments   View file @9f62fb9
1 %!PS-Adobe-3.0 EPSF-3.0 1 %!PS-Adobe-3.0 EPSF-3.0
2 %%BoundingBox: 35 632 440 780 2 %%BoundingBox: 35 632 440 780
3 %%Title: FD_Twisted_pair 3 %%Title: FD_Twisted_pair
4 -%%CreationDate: Fri Nov 18 11:37:21 2016 4 +%%CreationDate: Fri Jul 6 11:09:17 2018
5 %%Creator: Tgif-4.2.5-QPL written by William Chia-Wei Cheng (bill.cheng@acm.org) 5 %%Creator: Tgif-4.2.5-QPL written by William Chia-Wei Cheng (bill.cheng@acm.org)
6 %%ProducedBy: (unknown) 6 %%ProducedBy: (unknown)
7 %%Pages: 1 7 %%Pages: 1
@@ -178,7 +178,7 @@ NP @@ -178,7 +178,7 @@ NP
178 0 SG 178 0 SG
179 GS 179 GS
180 1 W 180 1 W
181 - 515 295 M 181 + 530 300 M
182 GS 182 GS
183 0 SG 183 0 SG
184 /Courier FF [14 0 0 -14 0 0] MS 184 /Courier FF [14 0 0 -14 0 0] MS
@@ -197,7 +197,7 @@ NP @@ -197,7 +197,7 @@ NP
197 /Courier FF [14 0 0 -14 0 0] MS 197 /Courier FF [14 0 0 -14 0 0] MS
198 (Frequency Dependent Dielectric) SH 198 (Frequency Dependent Dielectric) SH
199 GR 199 GR
200 - 0 16 RM 200 + 0 15 RM
201 GS 201 GS
202 0 SG 202 0 SG
203 /Courier FF [14 0 0 -14 0 0] MS 203 /Courier FF [14 0 0 -14 0 0] MS
@@ -275,13 +275,13 @@ NP @@ -275,13 +275,13 @@ NP
275 0 SG 275 0 SG
276 GS 276 GS
277 1 W 277 1 W
278 - 315 230 M 278 + 310 235 M
279 GS 279 GS
280 0 SG 280 0 SG
281 /Courier FF [14 0 0 -14 0 0] MS 281 /Courier FF [14 0 0 -14 0 0] MS
282 (Conductor ) SH 282 (Conductor ) SH
283 GR 283 GR
284 - 0 16 RM 284 + 0 15 RM
285 GS 285 GS
286 0 SG 286 0 SG
287 /Courier FF [14 0 0 -14 0 0] MS 287 /Courier FF [14 0 0 -14 0 0] MS
@@ -404,7 +404,7 @@ NP @@ -404,7 +404,7 @@ NP
404 0 SG 404 0 SG
405 GS 405 GS
406 1 W 406 1 W
407 - 530 245 M 407 + 535 245 M
408 GS 408 GS
409 0 SG 409 0 SG
410 /Courier FF [14 0 0 -14 0 0] MS 410 /Courier FF [14 0 0 -14 0 0] MS
@@ -418,6 +418,6 @@ end @@ -418,6 +418,6 @@ end
418 showpage 418 showpage
419 419
420 %%Trailer 420 %%Trailer
421 -%MatchingCreationDate: Fri Nov 18 11:37:21 2016 421 +%MatchingCreationDate: Fri Jul 6 11:09:17 2018
422 %%DocumentFonts: Courier 422 %%DocumentFonts: Courier
423 %%EOF 423 %%EOF
DOCUMENTATION/USER_GUIDE/Imgs/FD_Twisted_pair.obj
  Diff comments   View file @9f62fb9
@@ -66,11 +66,11 @@ spline_tightness(1). @@ -66,11 +66,11 @@ spline_tightness(1).
66 page(1,"",1,''). 66 page(1,"",1,'').
67 oval('Black','',327,117,413,203,0,3,1,0,0,0,0,0,0,'3',0,[ 67 oval('Black','',327,117,413,203,0,3,1,0,0,0,0,0,0,'3',0,[
68 ]). 68 ]).
69 -text('Black',330,342,1,0,1,108,16,27,13,3,0,0,0,0,-65534,108,16,0,0,"",0,0,0,0,355,'',[  
70 -minilines(108,16,0,0,0,0,0,[  
71 -mini_line(108,13,3,0,0,0,[  
72 -str_block(0,108,13,3,0,-1,0,0,0,[  
73 -str_seg('Black','Courier',0,80640,108,13,3,0,-1,0,0,0,0,0, 69 +text('Black',330,343,1,0,1,108,15,27,12,3,0,0,0,0,-65534,108,15,0,0,"",0,0,0,0,355,'',[
  70 +minilines(108,15,0,0,0,0,0,[
  71 +mini_line(108,12,3,0,0,0,[
  72 +str_block(0,108,12,3,0,-1,0,0,0,[
  73 +str_seg('Black','Courier',0,80640,108,12,3,0,-1,0,0,0,0,0,
74 "Twisted Pair")]) 74 "Twisted Pair")])
75 ]) 75 ])
76 ])]). 76 ])]).
@@ -79,24 +79,24 @@ poly('Black','',2,[ @@ -79,24 +79,24 @@ poly('Black','',2,[
79 "0","",[ 79 "0","",[
80 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 80 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
81 ]). 81 ]).
82 -text('Black',515,282,1,0,1,144,16,173,13,3,0,0,0,0,-65534,144,16,0,0,"",0,0,0,0,295,'',[  
83 -minilines(144,16,0,0,0,0,0,[  
84 -mini_line(144,13,3,0,0,0,[  
85 -str_block(0,144,13,3,0,-2,0,0,0,[  
86 -str_seg('Black','Courier',0,80640,144,13,3,0,-2,0,0,0,0,0, 82 +text('Black',530,288,1,0,1,144,15,173,12,3,0,0,0,0,-65534,144,15,0,0,"",0,0,0,0,300,'',[
  83 +minilines(144,15,0,0,0,0,0,[
  84 +mini_line(144,12,3,0,0,0,[
  85 +str_block(0,144,12,3,0,-2,0,0,0,[
  86 +str_seg('Black','Courier',0,80640,144,12,3,0,-2,0,0,0,0,0,
87 "Conductor radius")]) 87 "Conductor radius")])
88 ]) 88 ])
89 ])]). 89 ])]).
90 -text('Black',510,162,2,0,1,270,32,218,13,3,0,0,0,0,-65534,270,32,0,0,"",0,0,0,0,175,'',[  
91 -minilines(270,32,0,0,0,0,0,[  
92 -mini_line(270,13,3,0,0,0,[  
93 -str_block(0,270,13,3,0,-1,0,0,0,[  
94 -str_seg('Black','Courier',0,80640,270,13,3,0,-1,0,0,0,0,0, 90 +text('Black',510,163,2,0,1,270,30,218,12,3,0,0,0,0,-65534,270,30,0,0,"",0,0,0,0,175,'',[
  91 +minilines(270,30,0,0,0,0,0,[
  92 +mini_line(270,12,3,0,0,0,[
  93 +str_block(0,270,12,3,0,-1,0,0,0,[
  94 +str_seg('Black','Courier',0,80640,270,12,3,0,-1,0,0,0,0,0,
95 "Frequency Dependent Dielectric")]) 95 "Frequency Dependent Dielectric")])
96 ]), 96 ]),
97 -mini_line(189,13,3,0,0,0,[  
98 -str_block(0,189,13,3,0,-1,0,0,0,[  
99 -str_seg('Black','Courier',0,80640,189,13,3,0,-1,0,0,0,0,0, 97 +mini_line(189,12,3,0,0,0,[
  98 +str_block(0,189,12,3,0,-1,0,0,0,[
  99 +str_seg('Black','Courier',0,80640,189,12,3,0,-1,0,0,0,0,0,
100 "relative permittivity")]) 100 "relative permittivity")])
101 ]) 101 ])
102 ])]). 102 ])]).
@@ -112,16 +112,16 @@ poly('Black','',2,[ @@ -112,16 +112,16 @@ poly('Black','',2,[
112 "0","",[ 112 "0","",[
113 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 113 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
114 ]). 114 ]).
115 -text('Black',315,217,2,0,1,90,32,235,13,3,0,0,0,0,-65534,90,32,0,0,"",0,0,0,0,230,'',[  
116 -minilines(90,32,0,0,0,0,0,[  
117 -mini_line(90,13,3,0,0,0,[  
118 -str_block(0,90,13,3,0,-8,0,0,0,[  
119 -str_seg('Black','Courier',0,80640,90,13,3,0,-8,0,0,0,0,0, 115 +text('Black',310,223,2,0,1,90,30,235,12,3,0,0,0,0,-65534,90,30,0,0,"",0,0,0,0,235,'',[
  116 +minilines(90,30,0,0,0,0,0,[
  117 +mini_line(90,12,3,0,0,0,[
  118 +str_block(0,90,12,3,0,-8,0,0,0,[
  119 +str_seg('Black','Courier',0,80640,90,12,3,0,-8,0,0,0,0,0,
120 "Conductor ")]) 120 "Conductor ")])
121 ]), 121 ]),
122 -mini_line(90,13,3,0,0,0,[  
123 -str_block(0,90,13,3,0,-1,0,0,0,[  
124 -str_seg('Black','Courier',0,80640,90,13,3,0,-1,0,0,0,0,0, 122 +mini_line(90,12,3,0,0,0,[
  123 +str_block(0,90,12,3,0,-1,0,0,0,[
  124 +str_seg('Black','Courier',0,80640,90,12,3,0,-1,0,0,0,0,0,
125 "separation")]) 125 "separation")])
126 ]) 126 ])
127 ])]). 127 ])]).
@@ -135,19 +135,19 @@ poly('Black','',2,[ @@ -135,19 +135,19 @@ poly('Black','',2,[
135 "0","",[ 135 "0","",[
136 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 136 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
137 ]). 137 ]).
138 -text('Black',65,142,1,0,1,126,16,242,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,155,'',[  
139 -minilines(126,16,0,0,0,0,0,[  
140 -mini_line(126,13,3,0,0,0,[  
141 -str_block(0,126,13,3,0,-3,0,0,0,[  
142 -str_seg('Black','Courier',0,80640,126,13,3,0,-3,0,0,0,0,0, 138 +text('Black',65,143,1,0,1,126,15,242,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,155,'',[
  139 +minilines(126,15,0,0,0,0,0,[
  140 +mini_line(126,12,3,0,0,0,[
  141 +str_block(0,126,12,3,0,-3,0,0,0,[
  142 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
143 "Conductor No 1")]) 143 "Conductor No 1")])
144 ]) 144 ])
145 ])]). 145 ])]).
146 -text('Black',65,267,1,0,1,126,16,245,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,280,'',[  
147 -minilines(126,16,0,0,0,0,0,[  
148 -mini_line(126,13,3,0,0,0,[  
149 -str_block(0,126,13,3,0,-2,0,0,0,[  
150 -str_seg('Black','Courier',0,80640,126,13,3,0,-2,0,0,0,0,0, 146 +text('Black',65,268,1,0,1,126,15,245,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,280,'',[
  147 +minilines(126,15,0,0,0,0,0,[
  148 +mini_line(126,12,3,0,0,0,[
  149 +str_block(0,126,12,3,0,-3,0,0,0,[
  150 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
151 "Conductor No 2")]) 151 "Conductor No 2")])
152 ]) 152 ])
153 ])]). 153 ])]).
@@ -160,11 +160,11 @@ poly('Black','',2,[ @@ -160,11 +160,11 @@ poly('Black','',2,[
160 "0","",[ 160 "0","",[
161 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 161 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
162 ]). 162 ]).
163 -text('Black',530,232,1,0,1,153,16,269,13,3,0,0,0,0,-65534,153,16,0,0,"",0,0,0,0,245,'',[  
164 -minilines(153,16,0,0,0,0,0,[  
165 -mini_line(153,13,3,0,0,0,[  
166 -str_block(0,153,13,3,0,-2,0,0,0,[  
167 -str_seg('Black','Courier',0,80640,153,13,3,0,-2,0,0,0,0,0, 163 +text('Black',535,233,1,0,1,153,15,269,12,3,0,0,0,0,-65534,153,15,0,0,"",0,0,0,0,245,'',[
  164 +minilines(153,15,0,0,0,0,0,[
  165 +mini_line(153,12,3,0,0,0,[
  166 +str_block(0,153,12,3,0,-2,0,0,0,[
  167 +str_seg('Black','Courier',0,80640,153,12,3,0,-2,0,0,0,0,0,
168 "Dielectric radius")]) 168 "Dielectric radius")])
169 ]) 169 ])
170 ])]). 170 ])]).
DOCUMENTATION/USER_GUIDE/Imgs/ZT_FD_Twinax.eps
  Diff comments   View file @9f62fb9
1 %!PS-Adobe-3.0 EPSF-3.0 1 %!PS-Adobe-3.0 EPSF-3.0
2 %%BoundingBox: 35 590 442 821 2 %%BoundingBox: 35 590 442 821
3 %%Title: ZT_FD_Twinax 3 %%Title: ZT_FD_Twinax
4 -%%CreationDate: Wed May 3 16:04:06 2017 4 +%%CreationDate: Fri Jul 6 11:08:05 2018
5 %%Creator: Tgif-4.2.5-QPL written by William Chia-Wei Cheng (bill.cheng@acm.org) 5 %%Creator: Tgif-4.2.5-QPL written by William Chia-Wei Cheng (bill.cheng@acm.org)
6 %%ProducedBy: (unknown) 6 %%ProducedBy: (unknown)
7 %%Pages: 1 7 %%Pages: 1
@@ -195,7 +195,7 @@ NP @@ -195,7 +195,7 @@ NP
195 /Courier FF [14 0 0 -14 0 0] MS 195 /Courier FF [14 0 0 -14 0 0] MS
196 (Inner conductor) SH 196 (Inner conductor) SH
197 GR 197 GR
198 - 0 16 RM 198 + 0 15 RM
199 GS 199 GS
200 0 SG 200 0 SG
201 /Courier FF [14 0 0 -14 0 0] MS 201 /Courier FF [14 0 0 -14 0 0] MS
@@ -246,13 +246,13 @@ NP @@ -246,13 +246,13 @@ NP
246 /Courier FF [14 0 0 -14 0 0] MS 246 /Courier FF [14 0 0 -14 0 0] MS
247 (Outer ) SH 247 (Outer ) SH
248 GR 248 GR
249 - 0 16 RM 249 + 0 15 RM
250 GS 250 GS
251 0 SG 251 0 SG
252 /Courier FF [14 0 0 -14 0 0] MS 252 /Courier FF [14 0 0 -14 0 0] MS
253 (dielectric) SH 253 (dielectric) SH
254 GR 254 GR
255 - 0 16 RM 255 + 0 15 RM
256 GS 256 GS
257 0 SG 257 0 SG
258 /Courier FF [14 0 0 -14 0 0] MS 258 /Courier FF [14 0 0 -14 0 0] MS
@@ -274,7 +274,7 @@ NP @@ -274,7 +274,7 @@ NP
274 0 SG 274 0 SG
275 GS 275 GS
276 1 W 276 1 W
277 - 555 160 M 277 + 585 150 M
278 GS 278 GS
279 0 SG 279 0 SG
280 /Courier FF [14 0 0 -14 0 0] MS 280 /Courier FF [14 0 0 -14 0 0] MS
@@ -315,7 +315,7 @@ NP @@ -315,7 +315,7 @@ NP
315 /Courier FF [14 0 0 -14 0 0] MS 315 /Courier FF [14 0 0 -14 0 0] MS
316 (Outer dielectric) SH 316 (Outer dielectric) SH
317 GR 317 GR
318 - 0 16 RM 318 + 0 15 RM
319 GS 319 GS
320 0 SG 320 0 SG
321 /Courier FF [14 0 0 -14 0 0] MS 321 /Courier FF [14 0 0 -14 0 0] MS
@@ -334,7 +334,7 @@ NP @@ -334,7 +334,7 @@ NP
334 /Courier FF [14 0 0 -14 0 0] MS 334 /Courier FF [14 0 0 -14 0 0] MS
335 (Inner dielectric) SH 335 (Inner dielectric) SH
336 GR 336 GR
337 - 0 16 RM 337 + 0 15 RM
338 GS 338 GS
339 0 SG 339 0 SG
340 /Courier FF [14 0 0 -14 0 0] MS 340 /Courier FF [14 0 0 -14 0 0] MS
@@ -434,19 +434,19 @@ NP @@ -434,19 +434,19 @@ NP
434 0 SG 434 0 SG
435 GS 435 GS
436 1 W 436 1 W
437 - 290 200 M 437 + 290 195 M
438 GS 438 GS
439 0 SG 439 0 SG
440 /Courier FF [14 0 0 -14 0 0] MS 440 /Courier FF [14 0 0 -14 0 0] MS
441 (Inner ) SH 441 (Inner ) SH
442 GR 442 GR
443 - 0 16 RM 443 + 0 15 RM
444 GS 444 GS
445 0 SG 445 0 SG
446 /Courier FF [14 0 0 -14 0 0] MS 446 /Courier FF [14 0 0 -14 0 0] MS
447 (conductor ) SH 447 (conductor ) SH
448 GR 448 GR
449 - 0 16 RM 449 + 0 15 RM
450 GS 450 GS
451 0 SG 451 0 SG
452 /Courier FF [14 0 0 -14 0 0] MS 452 /Courier FF [14 0 0 -14 0 0] MS
@@ -645,7 +645,7 @@ NP @@ -645,7 +645,7 @@ NP
645 /Courier FF [14 0 0 -14 0 0] MS 645 /Courier FF [14 0 0 -14 0 0] MS
646 (Inner dielectric) SH 646 (Inner dielectric) SH
647 GR 647 GR
648 - 0 16 RM 648 + 0 15 RM
649 GS 649 GS
650 0 SG 650 0 SG
651 /Courier FF [14 0 0 -14 0 0] MS 651 /Courier FF [14 0 0 -14 0 0] MS
@@ -659,6 +659,6 @@ end @@ -659,6 +659,6 @@ end
659 showpage 659 showpage
660 660
661 %%Trailer 661 %%Trailer
662 -%MatchingCreationDate: Wed May 3 16:04:06 2017 662 +%MatchingCreationDate: Fri Jul 6 11:08:05 2018
663 %%DocumentFonts: Courier 663 %%DocumentFonts: Courier
664 %%EOF 664 %%EOF
DOCUMENTATION/USER_GUIDE/Imgs/ZT_FD_Twinax.obj
  Diff comments   View file @9f62fb9
@@ -66,11 +66,11 @@ spline_tightness(1). @@ -66,11 +66,11 @@ spline_tightness(1).
66 page(1,"",1,''). 66 page(1,"",1,'').
67 oval('Black','',372,102,458,188,0,3,1,0,0,0,0,0,0,'3',0,[ 67 oval('Black','',372,102,458,188,0,3,1,0,0,0,0,0,0,'3',0,[
68 ]). 68 ]).
69 -text('Black',180,417,1,0,1,504,16,27,13,3,0,0,0,0,-65534,504,16,0,0,"",0,0,0,0,430,'',[  
70 -minilines(504,16,0,0,0,0,0,[  
71 -mini_line(504,13,3,0,0,0,[  
72 -str_block(0,504,13,3,0,-1,0,0,0,[  
73 -str_seg('Black','Courier',0,80640,504,13,3,0,-1,0,0,0,0,0, 69 +text('Black',180,418,1,0,1,504,15,27,12,3,0,0,0,0,-65534,504,15,0,0,"",0,0,0,0,430,'',[
  70 +minilines(504,15,0,0,0,0,0,[
  71 +mini_line(504,12,3,0,0,0,[
  72 +str_block(0,504,12,3,0,-1,0,0,0,[
  73 +str_seg('Black','Courier',0,80640,504,12,3,0,-1,0,0,0,0,0,
74 "Frequency dependent twinax cable with transfer impedance")]) 74 "Frequency dependent twinax cable with transfer impedance")])
75 ]) 75 ])
76 ])]). 76 ])]).
@@ -79,16 +79,16 @@ poly('Black','',2,[ @@ -79,16 +79,16 @@ poly('Black','',2,[
79 "0","",[ 79 "0","",[
80 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 80 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
81 ]). 81 ]).
82 -text('Black',585,337,2,0,1,135,32,173,13,3,0,0,0,0,-65534,135,32,0,0,"",0,0,0,0,350,'',[  
83 -minilines(135,32,0,0,0,0,0,[  
84 -mini_line(135,13,3,0,0,0,[  
85 -str_block(0,135,13,3,0,-1,0,0,0,[  
86 -str_seg('Black','Courier',0,80640,135,13,3,0,-1,0,0,0,0,0, 82 +text('Black',585,338,2,0,1,135,30,173,12,3,0,0,0,0,-65534,135,30,0,0,"",0,0,0,0,350,'',[
  83 +minilines(135,30,0,0,0,0,0,[
  84 +mini_line(135,12,3,0,0,0,[
  85 +str_block(0,135,12,3,0,-1,0,0,0,[
  86 +str_seg('Black','Courier',0,80640,135,12,3,0,-1,0,0,0,0,0,
87 "Inner conductor")]) 87 "Inner conductor")])
88 ]), 88 ]),
89 -mini_line(63,13,3,0,0,0,[  
90 -str_block(0,63,13,3,0,-2,0,0,0,[  
91 -str_seg('Black','Courier',0,80640,63,13,3,0,-2,0,0,0,0,0, 89 +mini_line(63,12,3,0,0,0,[
  90 +str_block(0,63,12,3,0,-2,0,0,0,[
  91 +str_seg('Black','Courier',0,80640,63,12,3,0,-2,0,0,0,0,0,
92 " radius")]) 92 " radius")])
93 ]) 93 ])
94 ])]). 94 ])]).
@@ -99,31 +99,31 @@ poly('Black','',2,[ @@ -99,31 +99,31 @@ poly('Black','',2,[
99 "0","",[ 99 "0","",[
100 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 100 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
101 ]). 101 ]).
102 -text('Black',515,27,3,0,1,90,48,198,13,3,0,0,0,0,-65534,90,48,0,0,"",0,0,0,0,40,'',[  
103 -minilines(90,48,0,0,0,0,0,[  
104 -mini_line(54,13,3,0,0,0,[  
105 -str_block(0,54,13,3,0,-8,0,0,0,[  
106 -str_seg('Black','Courier',0,80640,54,13,3,0,-8,0,0,0,0,0, 102 +text('Black',515,28,3,0,1,90,45,198,12,3,0,0,0,0,-65534,90,45,0,0,"",0,0,0,0,40,'',[
  103 +minilines(90,45,0,0,0,0,0,[
  104 +mini_line(54,12,3,0,0,0,[
  105 +str_block(0,54,12,3,0,-8,0,0,0,[
  106 +str_seg('Black','Courier',0,80640,54,12,3,0,-8,0,0,0,0,0,
107 "Outer ")]) 107 "Outer ")])
108 ]), 108 ]),
109 -mini_line(90,13,3,0,0,0,[  
110 -str_block(0,90,13,3,0,-1,0,0,0,[  
111 -str_seg('Black','Courier',0,80640,90,13,3,0,-1,0,0,0,0,0, 109 +mini_line(90,12,3,0,0,0,[
  110 +str_block(0,90,12,3,0,-1,0,0,0,[
  111 +str_seg('Black','Courier',0,80640,90,12,3,0,-1,0,0,0,0,0,
112 "dielectric")]) 112 "dielectric")])
113 ]), 113 ]),
114 -mini_line(54,13,3,0,0,0,[  
115 -str_block(0,54,13,3,0,-2,0,0,0,[  
116 -str_seg('Black','Courier',0,80640,54,13,3,0,-2,0,0,0,0,0, 114 +mini_line(54,12,3,0,0,0,[
  115 +str_block(0,54,12,3,0,-2,0,0,0,[
  116 +str_seg('Black','Courier',0,80640,54,12,3,0,-2,0,0,0,0,0,
117 "radius")]) 117 "radius")])
118 ]) 118 ])
119 ])]). 119 ])]).
120 oval('Black','',250,50,580,370,0,1,1,200,0,0,0,0,0,'1',0,[ 120 oval('Black','',250,50,580,370,0,1,1,200,0,0,0,0,0,'1',0,[
121 ]). 121 ]).
122 -text('Black',555,147,1,0,1,117,16,211,13,3,0,0,0,0,-65534,117,16,0,0,"",0,0,0,0,160,'',[  
123 -minilines(117,16,0,0,0,0,0,[  
124 -mini_line(117,13,3,0,0,0,[  
125 -str_block(0,117,13,3,0,-2,0,0,0,[  
126 -str_seg('Black','Courier',0,80640,117,13,3,0,-2,0,0,0,0,0, 122 +text('Black',585,138,1,0,1,117,15,211,12,3,0,0,0,0,-65534,117,15,0,0,"",0,0,0,0,150,'',[
  123 +minilines(117,15,0,0,0,0,0,[
  124 +mini_line(117,12,3,0,0,0,[
  125 +str_block(0,117,12,3,0,-2,0,0,0,[
  126 +str_seg('Black','Courier',0,80640,117,12,3,0,-2,0,0,0,0,0,
127 "Shield radius")]) 127 "Shield radius")])
128 ]) 128 ])
129 ])]). 129 ])]).
@@ -132,29 +132,29 @@ poly('Black','',2,[ @@ -132,29 +132,29 @@ poly('Black','',2,[
132 "0","",[ 132 "0","",[
133 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 133 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
134 ]). 134 ]).
135 -text('Black',570,82,2,0,1,189,32,217,13,3,0,0,0,0,-65534,189,32,0,0,"",0,0,0,0,95,'',[  
136 -minilines(189,32,0,0,0,0,0,[  
137 -mini_line(144,13,3,0,0,0,[  
138 -str_block(0,144,13,3,0,-1,0,0,0,[  
139 -str_seg('Black','Courier',0,80640,144,13,3,0,-1,0,0,0,0,0, 135 +text('Black',570,83,2,0,1,189,30,217,12,3,0,0,0,0,-65534,189,30,0,0,"",0,0,0,0,95,'',[
  136 +minilines(189,30,0,0,0,0,0,[
  137 +mini_line(144,12,3,0,0,0,[
  138 +str_block(0,144,12,3,0,-1,0,0,0,[
  139 +str_seg('Black','Courier',0,80640,144,12,3,0,-1,0,0,0,0,0,
140 "Outer dielectric")]) 140 "Outer dielectric")])
141 ]), 141 ]),
142 -mini_line(189,13,3,0,0,0,[  
143 -str_block(0,189,13,3,0,-1,0,0,0,[  
144 -str_seg('Black','Courier',0,80640,189,13,3,0,-1,0,0,0,0,0, 142 +mini_line(189,12,3,0,0,0,[
  143 +str_block(0,189,12,3,0,-1,0,0,0,[
  144 +str_seg('Black','Courier',0,80640,189,12,3,0,-1,0,0,0,0,0,
145 "relative permittivity")]) 145 "relative permittivity")])
146 ]) 146 ])
147 ])]). 147 ])]).
148 -text('Black',595,217,2,0,1,189,32,218,13,3,0,0,0,0,-65534,189,32,0,0,"",0,0,0,0,230,'',[  
149 -minilines(189,32,0,0,0,0,0,[  
150 -mini_line(144,13,3,0,0,0,[  
151 -str_block(0,144,13,3,0,-1,0,0,0,[  
152 -str_seg('Black','Courier',0,80640,144,13,3,0,-1,0,0,0,0,0, 148 +text('Black',595,218,2,0,1,189,30,218,12,3,0,0,0,0,-65534,189,30,0,0,"",0,0,0,0,230,'',[
  149 +minilines(189,30,0,0,0,0,0,[
  150 +mini_line(144,12,3,0,0,0,[
  151 +str_block(0,144,12,3,0,-1,0,0,0,[
  152 +str_seg('Black','Courier',0,80640,144,12,3,0,-1,0,0,0,0,0,
153 "Inner dielectric")]) 153 "Inner dielectric")])
154 ]), 154 ]),
155 -mini_line(189,13,3,0,0,0,[  
156 -str_block(0,189,13,3,0,-1,0,0,0,[  
157 -str_seg('Black','Courier',0,80640,189,13,3,0,-1,0,0,0,0,0, 155 +mini_line(189,12,3,0,0,0,[
  156 +str_block(0,189,12,3,0,-1,0,0,0,[
  157 +str_seg('Black','Courier',0,80640,189,12,3,0,-1,0,0,0,0,0,
158 "relative permittivity")]) 158 "relative permittivity")])
159 ]) 159 ])
160 ])]). 160 ])]).
@@ -175,21 +175,21 @@ poly('Black','',2,[ @@ -175,21 +175,21 @@ poly('Black','',2,[
175 "0","",[ 175 "0","",[
176 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 176 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
177 ]). 177 ]).
178 -text('Black',290,187,3,0,1,90,48,235,13,3,0,0,0,0,-65534,90,48,0,0,"",0,0,0,0,200,'',[  
179 -minilines(90,48,0,0,0,0,0,[  
180 -mini_line(54,13,3,0,0,0,[  
181 -str_block(0,54,13,3,0,-8,0,0,0,[  
182 -str_seg('Black','Courier',0,80640,54,13,3,0,-8,0,0,0,0,0, 178 +text('Black',290,183,3,0,1,90,45,235,12,3,0,0,0,0,-65534,90,45,0,0,"",0,0,0,0,195,'',[
  179 +minilines(90,45,0,0,0,0,0,[
  180 +mini_line(54,12,3,0,0,0,[
  181 +str_block(0,54,12,3,0,-8,0,0,0,[
  182 +str_seg('Black','Courier',0,80640,54,12,3,0,-8,0,0,0,0,0,
183 "Inner ")]) 183 "Inner ")])
184 ]), 184 ]),
185 -mini_line(90,13,3,0,0,0,[  
186 -str_block(0,90,13,3,0,-8,0,0,0,[  
187 -str_seg('Black','Courier',0,80640,90,13,3,0,-8,0,0,0,0,0, 185 +mini_line(90,12,3,0,0,0,[
  186 +str_block(0,90,12,3,0,-8,0,0,0,[
  187 +str_seg('Black','Courier',0,80640,90,12,3,0,-8,0,0,0,0,0,
188 "conductor ")]) 188 "conductor ")])
189 ]), 189 ]),
190 -mini_line(90,13,3,0,0,0,[  
191 -str_block(0,90,13,3,0,-1,0,0,0,[  
192 -str_seg('Black','Courier',0,80640,90,13,3,0,-1,0,0,0,0,0, 190 +mini_line(90,12,3,0,0,0,[
  191 +str_block(0,90,12,3,0,-1,0,0,0,[
  192 +str_seg('Black','Courier',0,80640,90,12,3,0,-1,0,0,0,0,0,
193 "separation")]) 193 "separation")])
194 ]) 194 ])
195 ])]). 195 ])]).
@@ -208,27 +208,27 @@ poly('Black','',2,[ @@ -208,27 +208,27 @@ poly('Black','',2,[
208 "0","",[ 208 "0","",[
209 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 209 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
210 ]). 210 ]).
211 -text('Black',65,142,1,0,1,126,16,242,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,155,'',[  
212 -minilines(126,16,0,0,0,0,0,[  
213 -mini_line(126,13,3,0,0,0,[  
214 -str_block(0,126,13,3,0,-3,0,0,0,[  
215 -str_seg('Black','Courier',0,80640,126,13,3,0,-3,0,0,0,0,0, 211 +text('Black',65,143,1,0,1,126,15,242,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,155,'',[
  212 +minilines(126,15,0,0,0,0,0,[
  213 +mini_line(126,12,3,0,0,0,[
  214 +str_block(0,126,12,3,0,-3,0,0,0,[
  215 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
216 "Conductor No 1")]) 216 "Conductor No 1")])
217 ]) 217 ])
218 ])]). 218 ])]).
219 -text('Black',70,247,1,0,1,126,16,245,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,260,'',[  
220 -minilines(126,16,0,0,0,0,0,[  
221 -mini_line(126,13,3,0,0,0,[  
222 -str_block(0,126,13,3,0,-2,0,0,0,[  
223 -str_seg('Black','Courier',0,80640,126,13,3,0,-2,0,0,0,0,0, 219 +text('Black',70,248,1,0,1,126,15,245,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,260,'',[
  220 +minilines(126,15,0,0,0,0,0,[
  221 +mini_line(126,12,3,0,0,0,[
  222 +str_block(0,126,12,3,0,-3,0,0,0,[
  223 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
224 "Conductor No 2")]) 224 "Conductor No 2")])
225 ]) 225 ])
226 ])]). 226 ])]).
227 -text('Black',70,317,1,0,1,126,16,246,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,330,'',[  
228 -minilines(126,16,0,0,0,0,0,[  
229 -mini_line(126,13,3,0,0,0,[  
230 -str_block(0,126,13,3,0,-2,0,0,0,[  
231 -str_seg('Black','Courier',0,80640,126,13,3,0,-2,0,0,0,0,0, 227 +text('Black',70,318,1,0,1,126,15,246,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,330,'',[
  228 +minilines(126,15,0,0,0,0,0,[
  229 +mini_line(126,12,3,0,0,0,[
  230 +str_block(0,126,12,3,0,-2,0,0,0,[
  231 +str_seg('Black','Courier',0,80640,126,12,3,0,-2,0,0,0,0,0,
232 "Conductor No 3")]) 232 "Conductor No 3")])
233 ]) 233 ])
234 ])]). 234 ])]).
@@ -251,16 +251,16 @@ poly('Black','',3,[ @@ -251,16 +251,16 @@ poly('Black','',3,[
251 "0","",[ 251 "0","",[
252 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 252 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
253 ]). 253 ]).
254 -text('Black',565,377,2,0,1,144,32,266,13,3,0,0,0,0,-65534,144,32,0,0,"",0,0,0,0,390,'',[  
255 -minilines(144,32,0,0,0,0,0,[  
256 -mini_line(144,13,3,0,0,0,[  
257 -str_block(0,144,13,3,0,-1,0,0,0,[  
258 -str_seg('Black','Courier',0,80640,144,13,3,0,-1,0,0,0,0,0, 254 +text('Black',565,378,2,0,1,144,30,266,12,3,0,0,0,0,-65534,144,30,0,0,"",0,0,0,0,390,'',[
  255 +minilines(144,30,0,0,0,0,0,[
  256 +mini_line(144,12,3,0,0,0,[
  257 +str_block(0,144,12,3,0,-1,0,0,0,[
  258 +str_seg('Black','Courier',0,80640,144,12,3,0,-1,0,0,0,0,0,
259 "Inner dielectric")]) 259 "Inner dielectric")])
260 ]), 260 ]),
261 -mini_line(63,13,3,0,0,0,[  
262 -str_block(0,63,13,3,0,-2,0,0,0,[  
263 -str_seg('Black','Courier',0,80640,63,13,3,0,-2,0,0,0,0,0, 261 +mini_line(63,12,3,0,0,0,[
  262 +str_block(0,63,12,3,0,-2,0,0,0,[
  263 +str_seg('Black','Courier',0,80640,63,12,3,0,-2,0,0,0,0,0,
264 " radius")]) 264 " radius")])
265 ]) 265 ])
266 ])]). 266 ])]).
DOCUMENTATION/USER_GUIDE/Imgs/cylindrical_with_dielectric.eps
  Diff comments   View file @9f62fb9
1 %!PS-Adobe-3.0 EPSF-3.0 1 %!PS-Adobe-3.0 EPSF-3.0
2 -%%BoundingBox: 51 638 310 768 2 +%%BoundingBox: 51 638 317 770
3 %%Title: cylindrical_with_dielectric 3 %%Title: cylindrical_with_dielectric
4 -%%CreationDate: Fri Nov 18 11:37:14 2016 4 +%%CreationDate: Fri Jul 6 11:13:23 2018
5 %%Creator: Tgif-4.2.5-QPL written by William Chia-Wei Cheng (bill.cheng@acm.org) 5 %%Creator: Tgif-4.2.5-QPL written by William Chia-Wei Cheng (bill.cheng@acm.org)
6 %%ProducedBy: (unknown) 6 %%ProducedBy: (unknown)
7 %%Pages: 1 7 %%Pages: 1
@@ -112,7 +112,7 @@ end @@ -112,7 +112,7 @@ end
112 %%EndProlog 112 %%EndProlog
113 %%Page: 1 1 113 %%Page: 1 1
114 114
115 -%%PageBoundingBox: 51 638 310 768 115 +%%PageBoundingBox: 51 638 317 770
116 tgifdict begin 116 tgifdict begin
117 /tgifsavedpage save def 117 /tgifsavedpage save def
118 118
@@ -178,13 +178,13 @@ NP @@ -178,13 +178,13 @@ NP
178 0 SG 178 0 SG
179 GS 179 GS
180 1 W 180 1 W
181 - 445 255 M 181 + 480 270 M
182 GS 182 GS
183 0 SG 183 0 SG
184 /Courier FF [14 0 0 -14 0 0] MS 184 /Courier FF [14 0 0 -14 0 0] MS
185 (conductor) SH 185 (conductor) SH
186 GR 186 GR
187 - 0 16 RM 187 + 0 15 RM
188 GS 188 GS
189 0 SG 189 0 SG
190 /Courier FF [14 0 0 -14 0 0] MS 190 /Courier FF [14 0 0 -14 0 0] MS
@@ -229,13 +229,13 @@ NP @@ -229,13 +229,13 @@ NP
229 0 SG 229 0 SG
230 GS 230 GS
231 1 W 231 1 W
232 - 460 145 M 232 + 460 130 M
233 GS 233 GS
234 0 SG 234 0 SG
235 /Courier FF [14 0 0 -14 0 0] MS 235 /Courier FF [14 0 0 -14 0 0] MS
236 (dielectric) SH 236 (dielectric) SH
237 GR 237 GR
238 - 0 16 RM 238 + 0 15 RM
239 GS 239 GS
240 0 SG 240 0 SG
241 /Courier FF [14 0 0 -14 0 0] MS 241 /Courier FF [14 0 0 -14 0 0] MS
@@ -278,12 +278,24 @@ NP @@ -278,12 +278,24 @@ NP
278 GR 278 GR
279 GR 279 GR
280 280
  281 +% POLY/OPEN-SPLINE
  282 +0 SG
  283 +GS
  284 + NP
  285 + 435 240 M
  286 + 470 265 L
  287 + 475 265 L
  288 + TGSM
  289 + 1 W
  290 + S
  291 +GR
  292 +
281 GR 293 GR
282 tgifsavedpage restore 294 tgifsavedpage restore
283 end 295 end
284 showpage 296 showpage
285 297
286 %%Trailer 298 %%Trailer
287 -%MatchingCreationDate: Fri Nov 18 11:37:14 2016 299 +%MatchingCreationDate: Fri Jul 6 11:13:23 2018
288 %%DocumentFonts: Courier 300 %%DocumentFonts: Courier
289 %%EOF 301 %%EOF
DOCUMENTATION/USER_GUIDE/Imgs/cylindrical_with_dielectric.obj
  Diff comments   View file @9f62fb9
1 %TGIF 4.2.5-QPL 1 %TGIF 4.2.5-QPL
2 -state(0,37,100.000,0,0,0,16,1,0,1,1,0,0,1,0,1,0,'Courier',0,80640,0,0,1,5,0,0,1,1,0,16,0,0,1,1,1,1,1050,1485,1,0,2880,0). 2 +state(0,37,100.000,241,101,1,16,1,0,1,1,0,0,0,0,1,0,'Courier',0,80640,0,0,1,5,0,1,1,1,0,16,0,0,1,1,1,1,1050,1485,1,0,2880,0).
3 % 3 %
4 % @(#)$Header$ 4 % @(#)$Header$
5 % %W% 5 % %W%
@@ -66,11 +66,11 @@ spline_tightness(1). @@ -66,11 +66,11 @@ spline_tightness(1).
66 page(1,"",1,''). 66 page(1,"",1,'').
67 oval('Black','',337,157,448,263,0,3,1,0,0,0,0,0,0,'3',0,[ 67 oval('Black','',337,157,448,263,0,3,1,0,0,0,0,0,0,'3',0,[
68 ]). 68 ]).
69 -text('Black',250,332,1,0,1,297,16,27,13,3,0,0,0,0,-65534,297,16,0,0,"",0,0,0,0,345,'',[  
70 -minilines(297,16,0,0,0,0,0,[  
71 -mini_line(297,13,3,0,0,0,[  
72 -str_block(0,297,13,3,0,-1,0,0,0,[  
73 -str_seg('Black','Courier',0,80640,297,13,3,0,-1,0,0,0,0,0, 69 +text('Black',250,333,1,0,1,297,15,27,12,3,0,0,0,0,-65534,297,15,0,0,"",0,0,0,0,345,'',[
  70 +minilines(297,15,0,0,0,0,0,[
  71 +mini_line(297,12,3,0,0,0,[
  72 +str_block(0,297,12,3,0,-1,0,0,0,[
  73 +str_seg('Black','Courier',0,80640,297,12,3,0,-1,0,0,0,0,0,
74 "Cylindrical cable with dielectric")]) 74 "Cylindrical cable with dielectric")])
75 ]) 75 ])
76 ])]). 76 ])]).
@@ -79,16 +79,16 @@ poly('Black','',2,[ @@ -79,16 +79,16 @@ poly('Black','',2,[
79 "0","",[ 79 "0","",[
80 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 80 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
81 ]). 81 ]).
82 -text('Black',445,242,2,0,1,81,32,173,13,3,0,0,0,0,-65534,81,32,0,0,"",0,0,0,0,255,'',[  
83 -minilines(81,32,0,0,0,0,0,[  
84 -mini_line(81,13,3,0,0,0,[  
85 -str_block(0,81,13,3,0,-1,0,0,0,[  
86 -str_seg('Black','Courier',0,80640,81,13,3,0,-1,0,0,0,0,0, 82 +text('Black',480,258,2,0,1,81,30,173,12,3,0,0,0,0,-65534,81,30,0,0,"",0,0,0,0,270,'',[
  83 +minilines(81,30,0,0,0,0,0,[
  84 +mini_line(81,12,3,0,0,0,[
  85 +str_block(0,81,12,3,0,-1,0,0,0,[
  86 +str_seg('Black','Courier',0,80640,81,12,3,0,-1,0,0,0,0,0,
87 "conductor")]) 87 "conductor")])
88 ]), 88 ]),
89 -mini_line(63,13,3,0,0,0,[  
90 -str_block(0,63,13,3,0,-2,0,0,0,[  
91 -str_seg('Black','Courier',0,80640,63,13,3,0,-2,0,0,0,0,0, 89 +mini_line(63,12,3,0,0,0,[
  90 +str_block(0,63,12,3,0,-2,0,0,0,[
  91 +str_seg('Black','Courier',0,80640,63,12,3,0,-2,0,0,0,0,0,
92 " radius")]) 92 " radius")])
93 ]) 93 ])
94 ])]). 94 ])]).
@@ -99,16 +99,16 @@ poly('Black','',2,[ @@ -99,16 +99,16 @@ poly('Black','',2,[
99 "0","",[ 99 "0","",[
100 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 100 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
101 ]). 101 ]).
102 -text('Black',460,132,2,0,1,90,32,198,13,3,0,0,0,0,-65534,90,32,0,0,"",0,0,0,0,145,'',[  
103 -minilines(90,32,0,0,0,0,0,[  
104 -mini_line(90,13,3,0,0,0,[  
105 -str_block(0,90,13,3,0,-1,0,0,0,[  
106 -str_seg('Black','Courier',0,80640,90,13,3,0,-1,0,0,0,0,0, 102 +text('Black',460,118,2,0,1,90,30,198,12,3,0,0,0,0,-65534,90,30,0,0,"",0,0,0,0,130,'',[
  103 +minilines(90,30,0,0,0,0,0,[
  104 +mini_line(90,12,3,0,0,0,[
  105 +str_block(0,90,12,3,0,-1,0,0,0,[
  106 +str_seg('Black','Courier',0,80640,90,12,3,0,-1,0,0,0,0,0,
107 "dielectric")]) 107 "dielectric")])
108 ]), 108 ]),
109 -mini_line(54,13,3,0,0,0,[  
110 -str_block(0,54,13,3,0,-2,0,0,0,[  
111 -str_seg('Black','Courier',0,80640,54,13,3,0,-2,0,0,0,0,0, 109 +mini_line(54,12,3,0,0,0,[
  110 +str_block(0,54,12,3,0,-2,0,0,0,[
  111 +str_seg('Black','Courier',0,80640,54,12,3,0,-2,0,0,0,0,0,
112 "radius")]) 112 "radius")])
113 ]) 113 ])
114 ])]). 114 ])]).
@@ -117,11 +117,16 @@ poly('Black','',2,[ @@ -117,11 +117,16 @@ poly('Black','',2,[
117 "0","",[ 117 "0","",[
118 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[ 118 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
119 ]). 119 ]).
120 -text('Black',95,207,1,0,1,126,16,289,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,220,'',[  
121 -minilines(126,16,0,0,0,0,0,[  
122 -mini_line(126,13,3,0,0,0,[  
123 -str_block(0,126,13,3,0,-3,0,0,0,[  
124 -str_seg('Black','Courier',0,80640,126,13,3,0,-3,0,0,0,0,0, 120 +text('Black',95,208,1,0,1,126,15,289,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,220,'',[
  121 +minilines(126,15,0,0,0,0,0,[
  122 +mini_line(126,12,3,0,0,0,[
  123 +str_block(0,126,12,3,0,-3,0,0,0,[
  124 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
125 "Conductor No 1")]) 125 "Conductor No 1")])
126 ]) 126 ])
127 ])]). 127 ])]).
  128 +poly('Black','',3,[
  129 + 435,240,470,265,475,265],0,1,1,290,0,0,0,0,0,0,0,'1',0,0,
  130 + "0","",[
  131 + 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
  132 +]).
DOCUMENTATION/USER_GUIDE/Tex/creating_a_cable_model.tex
  Diff comments   View file @9f62fb9
@@ -2,7 +2,7 @@ @@ -2,7 +2,7 @@
2 2
3 \section{Introduction} 3 \section{Introduction}
4 4
5 -This chapter describes the creation of a cable model from specifications. The methods by which frequency dependent cable parameters (relative permittivity, finite conductivity loss models and transfer impedance models) are specified are described before detailing the specifications for each of the available cable types in turn. An example for each cable type is provided. 5 +This chapter describes the creation of a cable model from specifications. The methods by which frequency dependent cable parameters (relative permittivity, finite conductivity loss models and transfer impedance models) are specified is described before detailing the specifications for each of the available cable types in turn. An example for each cable type is provided.
6 6
7 \section{Cable Types} \label{Cable_types} 7 \section{Cable Types} \label{Cable_types}
8 8
@@ -317,7 +317,7 @@ Cylindrical @@ -317,7 +317,7 @@ Cylindrical
317 Figure \ref{fig:ZT_FD_coax2} shows the cross section of the frequency dependent coaxial cable with transfer impedance and surface impedance loss. 317 Figure \ref{fig:ZT_FD_coax2} shows the cross section of the frequency dependent coaxial cable with transfer impedance and surface impedance loss.
318 A description of the cable parameters is given in table \ref{table_ZT_FD_Coax2} followed by an example. 318 A description of the cable parameters is given in table \ref{table_ZT_FD_Coax2} followed by an example.
319 319
320 -The inductance and capacitance of the coaxial mode is always calculated using the analytic formulae \cite{PaulMTL} 320 +The inductance and capacitance of the coaxial cable is always calculated using the analytic formulae \cite{PaulMTL}
321 321
322 \begin{equation} 322 \begin{equation}
323 L=\frac{\mu_0}{2 \pi} \ln\left(\frac{r_s}{r_w}\right) 323 L=\frac{\mu_0}{2 \pi} \ln\left(\frac{r_s}{r_w}\right)
DOCUMENTATION/USER_GUIDE/Tex/running_with_GUI.tex
  Diff comments   View file @9f62fb9
@@ -181,7 +181,7 @@ Figures \ref{fig:SW1_GUI_Cable_STP01}, \ref{fig:SW1_GUI_Cable_STP02} and \ref{fi @@ -181,7 +181,7 @@ Figures \ref{fig:SW1_GUI_Cable_STP01}, \ref{fig:SW1_GUI_Cable_STP02} and \ref{fi
181 181
182 \clearpage 182 \clearpage
183 183
184 -The result is the creation of two files, STP.cable\_spec and STP.cable, the specification and model files respectively, within the \textbf{CABLE} folder of the MOD libray. 184 +The result of building the shielded twisted pair cable model is the creation of two files, STP.cable\_spec and STP.cable, the specification and model files respectively, within the \textbf{CABLE} folder of the MOD libray.
185 185
186 \vbox{% 186 \vbox{%
187 \begin{verbatim} 187 \begin{verbatim}
@@ -223,7 +223,7 @@ Once the position of the cable has been defined, clicking OK will add the cable @@ -223,7 +223,7 @@ Once the position of the cable has been defined, clicking OK will add the cable
223 223
224 \clearpage 224 \clearpage
225 225
226 -From here further cables can be added to the bundle and/or a ground plane added, figure \ref{fig:SW1_GUI_Bundle_Spec04}. Finally the use of the Laplace solver to calculate inductance and capacitance matrices for the external domain and any overshielded domains (by default, approximate analytic formulae are used), figure \ref{fig:SW1_GUI_Bundle_Spec05}. See chapter \ref{Cable_bundle_spec_file_formats} for further information. As previously described, if the Laplace solver is used the mesh list will be populated and the meshes can be viewed by selecting them from the drop down list and a decision then made whether to refine the mesh or accept the default. 226 +Further cables can be added to the bundle and/or a ground plane added, figure \ref{fig:SW1_GUI_Bundle_Spec04}. Finally the use of the Laplace solver to calculate inductance and capacitance matrices for the external domain and any overshielded domains (by default, approximate analytic formulae are used), figure \ref{fig:SW1_GUI_Bundle_Spec05}. See chapter \ref{Cable_bundle_spec_file_formats} for further information. As previously described, if the Laplace solver is used the mesh list will be populated and the meshes can be viewed by selecting them from the drop down list and a decision then made whether to refine the mesh or accept the default.
227 227
228 \begin{figure}[h] 228 \begin{figure}[h]
229 \centering 229 \centering
@@ -282,7 +282,7 @@ A Spice cable bundle is built from a cable bundle model that exists in the MOD l @@ -282,7 +282,7 @@ A Spice cable bundle is built from a cable bundle model that exists in the MOD l
282 \label{fig:SW1_GUI_Spice_Spec02} 282 \label{fig:SW1_GUI_Spice_Spec02}
283 \end{figure} 283 \end{figure}
284 284
285 -From here the length of cable represented by the Spice model is set (1). An incident field may also be defined here (2), see chapter \ref{creating_a_spice_cable_bundle_model} for further information on the definition of an incident field. In order to include a transfer impedance model (3) the conductor number of the shield of interest must be specified along with the direction of the coupling. The coupling direction is specified as either +1 or -1 where +1 indicates coupling direction from inside the shield to outside and -1 indicates coupling from the outside to the inside, further information can again be found in chapter \ref{creating_a_spice_cable_bundle_model}. 285 +As shown in figure \ref{fig:SW1_GUI_Spice_Spec02} the length of cable represented by the Spice model is set (1). An incident field may also be defined here (2), see chapter \ref{creating_a_spice_cable_bundle_model} for further information on the definition of an incident field. In order to include a transfer impedance model (3) the conductor number of the shield of interest must be specified along with the direction of the coupling. The coupling direction is specified as either +1 or -1 where +1 indicates coupling direction from inside the shield to outside and -1 indicates coupling from the outside to the inside, further information can again be found in chapter \ref{creating_a_spice_cable_bundle_model}.
286 286
287 Once the Spice model has been completely specified, click \textbf{Save}. If the Spice model has been specified correctly clicking save will result in the button being greyed out, any errors will result in an appropriate error message indicating any incorrect or missing parameters. Next click build to generate the Spice model which should result in a \textbf{Run Status} dialogue box, figure \ref{fig:SW1_GUI_Spice_Spec03} indicating that the process has finished correctly. The Spice model form can now be closed. The result is the creation of the spice\_model\_spec file, two files defining the Spice library files (one each for LTspice and Ngspice) in the SPICE folder and their associated symbols in the SYMBOL FOLDER. 287 Once the Spice model has been completely specified, click \textbf{Save}. If the Spice model has been specified correctly clicking save will result in the button being greyed out, any errors will result in an appropriate error message indicating any incorrect or missing parameters. Next click build to generate the Spice model which should result in a \textbf{Run Status} dialogue box, figure \ref{fig:SW1_GUI_Spice_Spec03} indicating that the process has finished correctly. The Spice model form can now be closed. The result is the creation of the spice\_model\_spec file, two files defining the Spice library files (one each for LTspice and Ngspice) in the SPICE folder and their associated symbols in the SYMBOL FOLDER.
288 288
@@ -312,4 +312,4 @@ Once the Spice model has been completely specified, click \textbf{Save}. If the @@ -312,4 +312,4 @@ Once the Spice model has been completely specified, click \textbf{Save}. If the
312 \label{fig:SW1_GUI_Spice_Spec03} 312 \label{fig:SW1_GUI_Spice_Spec03}
313 \end{figure} 313 \end{figure}
314 314
315 -The process for building all Spice bundle models is similar to that , only differing in the individual description of the different cable geometries. 315 +The process for building all Spice bundle models is similar to that described, only differing in the individual description of the different cable geometries.
@@ -12,5 +12,5 @@ cd TEST_CASES @@ -12,5 +12,5 @@ cd TEST_CASES
12 cd .. 12 cd ..
13 # 13 #
14 cd DOCUMENTATION 14 cd DOCUMENTATION
15 -make clean 15 +make clean_all
16 cd .. 16 cd ..