UoN / SACAMOS

Commit 9f62fb997ae9d79fda361b37bc630d14fc479159

Authored by Chris Smartt
1 parent 2b58f1d5
Exists in master and in 3 other branches nested_overshields, proximity_effects, v4

Corrections to User Guide

Showing 13 changed files with 265 additions and 248 deletions   Show diff stats
Inline Side-by-side
DOCUMENTATION/SACAMOS_UserGuide.pdf
View file @9f62fb9
No preview for this file type
DOCUMENTATION/THEORY_MANUAL/Imgs/scenario-eps-converted-to.pdf deleted
View file @2b58f1d
No preview for this file type
DOCUMENTATION/USER_GUIDE/Imgs/Coax2.eps
  Diff comments   View file @9f62fb9
1 1 %!PS-Adobe-3.0 EPSF-3.0
2 2 %%BoundingBox: 57 578 451 821
3 3 %%Title: Coax2
4   -%%CreationDate: Wed Nov 8 14:24:23 2017
  4 +%%CreationDate: Fri Jul 6 11:07:02 2018
5 5 %%Creator: Tgif-4.2.5-QPL written by William Chia-Wei Cheng (bill.cheng@acm.org)
6 6 %%ProducedBy: (unknown)
7 7 %%Pages: 1
... ... @@ -178,7 +178,7 @@ NP
178 178 0 SG
179 179 GS
180 180 1 W
181   - 465 255 M
  181 + 455 255 M
182 182 GS
183 183 0 SG
184 184 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -269,7 +269,7 @@ NP
269 269 0 SG
270 270 GS
271 271 1 W
272   - 570 155 M
  272 + 575 150 M
273 273 GS
274 274 0 SG
275 275 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -514,6 +514,6 @@ end
514 514 showpage
515 515  
516 516 %%Trailer
517   -%MatchingCreationDate: Wed Nov 8 14:24:23 2017
  517 +%MatchingCreationDate: Fri Jul 6 11:07:02 2018
518 518 %%DocumentFonts: Courier
519 519 %%EOF
... ...
DOCUMENTATION/USER_GUIDE/Imgs/Coax2.obj
  Diff comments   View file @9f62fb9
... ... @@ -66,11 +66,11 @@ spline_tightness(1).
66 66 page(1,"",1,'').
67 67 oval('Black','',357,157,468,263,0,3,1,0,0,0,0,0,0,'3',0,[
68 68 ]).
69   -text('Black',230,437,1,0,1,378,16,27,13,3,0,0,0,0,-65534,378,16,0,0,"",0,0,0,0,450,'',[
70   -minilines(378,16,0,0,0,0,0,[
71   -mini_line(378,13,3,0,0,0,[
72   -str_block(0,378,13,3,0,-8,0,0,0,[
73   -str_seg('Black','Courier',0,80640,378,13,3,0,-8,0,0,0,0,0,
  69 +text('Black',230,438,1,0,1,378,15,27,12,3,0,0,0,0,-65534,378,15,0,0,"",0,0,0,0,450,'',[
  70 +minilines(378,15,0,0,0,0,0,[
  71 +mini_line(378,12,3,0,0,0,[
  72 +str_block(0,378,12,3,0,-8,0,0,0,[
  73 +str_seg('Black','Courier',0,80640,378,12,3,0,-8,0,0,0,0,0,
74 74 "Coaxial cable with surface impedance loss ")])
75 75 ])
76 76 ])]).
... ... @@ -79,21 +79,21 @@ poly('Black','',2,[
79 79 "0","",[
80 80 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
81 81 ]).
82   -text('Black',465,242,3,0,1,81,48,173,13,3,0,0,0,0,-65534,81,48,0,0,"",0,0,0,0,255,'',[
83   -minilines(81,48,0,0,0,0,0,[
84   -mini_line(54,13,3,0,0,0,[
85   -str_block(0,54,13,3,0,-8,0,0,0,[
86   -str_seg('Black','Courier',0,80640,54,13,3,0,-8,0,0,0,0,0,
  82 +text('Black',455,243,3,0,1,81,45,173,12,3,0,0,0,0,-65534,81,45,0,0,"",0,0,0,0,255,'',[
  83 +minilines(81,45,0,0,0,0,0,[
  84 +mini_line(54,12,3,0,0,0,[
  85 +str_block(0,54,12,3,0,-8,0,0,0,[
  86 +str_seg('Black','Courier',0,80640,54,12,3,0,-8,0,0,0,0,0,
87 87 "Inner ")])
88 88 ]),
89   -mini_line(81,13,3,0,0,0,[
90   -str_block(0,81,13,3,0,-1,0,0,0,[
91   -str_seg('Black','Courier',0,80640,81,13,3,0,-1,0,0,0,0,0,
  89 +mini_line(81,12,3,0,0,0,[
  90 +str_block(0,81,12,3,0,-1,0,0,0,[
  91 +str_seg('Black','Courier',0,80640,81,12,3,0,-1,0,0,0,0,0,
92 92 "conductor")])
93 93 ]),
94   -mini_line(63,13,3,0,0,0,[
95   -str_block(0,63,13,3,0,-2,0,0,0,[
96   -str_seg('Black','Courier',0,80640,63,13,3,0,-2,0,0,0,0,0,
  94 +mini_line(63,12,3,0,0,0,[
  95 +str_block(0,63,12,3,0,-2,0,0,0,[
  96 +str_seg('Black','Courier',0,80640,63,12,3,0,-2,0,0,0,0,0,
97 97 " radius")])
98 98 ])
99 99 ])]).
... ... @@ -104,31 +104,31 @@ poly('Black','',2,[
104 104 "0","",[
105 105 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
106 106 ]).
107   -text('Black',515,27,3,0,1,90,48,198,13,3,0,0,0,0,-65534,90,48,0,0,"",0,0,0,0,40,'',[
108   -minilines(90,48,0,0,0,0,0,[
109   -mini_line(54,13,3,0,0,0,[
110   -str_block(0,54,13,3,0,-8,0,0,0,[
111   -str_seg('Black','Courier',0,80640,54,13,3,0,-8,0,0,0,0,0,
  107 +text('Black',515,28,3,0,1,90,45,198,12,3,0,0,0,0,-65534,90,45,0,0,"",0,0,0,0,40,'',[
  108 +minilines(90,45,0,0,0,0,0,[
  109 +mini_line(54,12,3,0,0,0,[
  110 +str_block(0,54,12,3,0,-8,0,0,0,[
  111 +str_seg('Black','Courier',0,80640,54,12,3,0,-8,0,0,0,0,0,
112 112 "Outer ")])
113 113 ]),
114   -mini_line(90,13,3,0,0,0,[
115   -str_block(0,90,13,3,0,-1,0,0,0,[
116   -str_seg('Black','Courier',0,80640,90,13,3,0,-1,0,0,0,0,0,
  114 +mini_line(90,12,3,0,0,0,[
  115 +str_block(0,90,12,3,0,-1,0,0,0,[
  116 +str_seg('Black','Courier',0,80640,90,12,3,0,-1,0,0,0,0,0,
117 117 "dielectric")])
118 118 ]),
119   -mini_line(54,13,3,0,0,0,[
120   -str_block(0,54,13,3,0,-2,0,0,0,[
121   -str_seg('Black','Courier',0,80640,54,13,3,0,-2,0,0,0,0,0,
  119 +mini_line(54,12,3,0,0,0,[
  120 +str_block(0,54,12,3,0,-2,0,0,0,[
  121 +str_seg('Black','Courier',0,80640,54,12,3,0,-2,0,0,0,0,0,
122 122 "radius")])
123 123 ])
124 124 ])]).
125 125 oval('Black','',250,50,580,370,0,1,1,200,0,0,0,0,0,'1',0,[
126 126 ]).
127   -text('Black',570,142,1,0,1,117,16,211,13,3,0,0,0,0,-65534,117,16,0,0,"",0,0,0,0,155,'',[
128   -minilines(117,16,0,0,0,0,0,[
129   -mini_line(117,13,3,0,0,0,[
130   -str_block(0,117,13,3,0,-2,0,0,0,[
131   -str_seg('Black','Courier',0,80640,117,13,3,0,-2,0,0,0,0,0,
  127 +text('Black',575,138,1,0,1,117,15,211,12,3,0,0,0,0,-65534,117,15,0,0,"",0,0,0,0,150,'',[
  128 +minilines(117,15,0,0,0,0,0,[
  129 +mini_line(117,12,3,0,0,0,[
  130 +str_block(0,117,12,3,0,-2,0,0,0,[
  131 +str_seg('Black','Courier',0,80640,117,12,3,0,-2,0,0,0,0,0,
132 132 "Shield radius")])
133 133 ])
134 134 ])]).
... ... @@ -137,29 +137,29 @@ poly('Black','',2,[
137 137 "0","",[
138 138 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
139 139 ]).
140   -text('Black',570,82,2,0,1,189,32,217,13,3,0,0,0,0,-65534,189,32,0,0,"",0,0,0,0,95,'',[
141   -minilines(189,32,0,0,0,0,0,[
142   -mini_line(144,13,3,0,0,0,[
143   -str_block(0,144,13,3,0,-1,0,0,0,[
144   -str_seg('Black','Courier',0,80640,144,13,3,0,-1,0,0,0,0,0,
  140 +text('Black',570,83,2,0,1,189,30,217,12,3,0,0,0,0,-65534,189,30,0,0,"",0,0,0,0,95,'',[
  141 +minilines(189,30,0,0,0,0,0,[
  142 +mini_line(144,12,3,0,0,0,[
  143 +str_block(0,144,12,3,0,-1,0,0,0,[
  144 +str_seg('Black','Courier',0,80640,144,12,3,0,-1,0,0,0,0,0,
145 145 "Outer dielectric")])
146 146 ]),
147   -mini_line(189,13,3,0,0,0,[
148   -str_block(0,189,13,3,0,-1,0,0,0,[
149   -str_seg('Black','Courier',0,80640,189,13,3,0,-1,0,0,0,0,0,
  147 +mini_line(189,12,3,0,0,0,[
  148 +str_block(0,189,12,3,0,-1,0,0,0,[
  149 +str_seg('Black','Courier',0,80640,189,12,3,0,-1,0,0,0,0,0,
150 150 "relative permittivity")])
151 151 ])
152 152 ])]).
153   -text('Black',595,217,2,0,1,189,32,218,13,3,0,0,0,0,-65534,189,32,0,0,"",0,0,0,0,230,'',[
154   -minilines(189,32,0,0,0,0,0,[
155   -mini_line(144,13,3,0,0,0,[
156   -str_block(0,144,13,3,0,-1,0,0,0,[
157   -str_seg('Black','Courier',0,80640,144,13,3,0,-1,0,0,0,0,0,
  153 +text('Black',595,218,2,0,1,189,30,218,12,3,0,0,0,0,-65534,189,30,0,0,"",0,0,0,0,230,'',[
  154 +minilines(189,30,0,0,0,0,0,[
  155 +mini_line(144,12,3,0,0,0,[
  156 +str_block(0,144,12,3,0,-1,0,0,0,[
  157 +str_seg('Black','Courier',0,80640,144,12,3,0,-1,0,0,0,0,0,
158 158 "Inner dielectric")])
159 159 ]),
160   -mini_line(189,13,3,0,0,0,[
161   -str_block(0,189,13,3,0,-1,0,0,0,[
162   -str_seg('Black','Courier',0,80640,189,13,3,0,-1,0,0,0,0,0,
  160 +mini_line(189,12,3,0,0,0,[
  161 +str_block(0,189,12,3,0,-1,0,0,0,[
  162 +str_seg('Black','Courier',0,80640,189,12,3,0,-1,0,0,0,0,0,
163 163 "relative permittivity")])
164 164 ])
165 165 ])]).
... ... @@ -178,11 +178,11 @@ poly('Black','',2,[
178 178 "0","",[
179 179 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
180 180 ]).
181   -text('Black',105,202,1,0,1,126,16,291,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,215,'',[
182   -minilines(126,16,0,0,0,0,0,[
183   -mini_line(126,13,3,0,0,0,[
184   -str_block(0,126,13,3,0,-3,0,0,0,[
185   -str_seg('Black','Courier',0,80640,126,13,3,0,-3,0,0,0,0,0,
  181 +text('Black',105,203,1,0,1,126,15,291,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,215,'',[
  182 +minilines(126,15,0,0,0,0,0,[
  183 +mini_line(126,12,3,0,0,0,[
  184 +str_block(0,126,12,3,0,-3,0,0,0,[
  185 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
186 186 "Conductor No 1")])
187 187 ])
188 188 ])]).
... ... @@ -191,19 +191,19 @@ poly('Black','',2,[
191 191 "0","",[
192 192 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
193 193 ]).
194   -text('Black',115,322,1,0,1,126,16,293,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,335,'',[
195   -minilines(126,16,0,0,0,0,0,[
196   -mini_line(126,13,3,0,0,0,[
197   -str_block(0,126,13,3,0,-2,0,0,0,[
198   -str_seg('Black','Courier',0,80640,126,13,3,0,-2,0,0,0,0,0,
  194 +text('Black',115,323,1,0,1,126,15,293,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,335,'',[
  195 +minilines(126,15,0,0,0,0,0,[
  196 +mini_line(126,12,3,0,0,0,[
  197 +str_block(0,126,12,3,0,-3,0,0,0,[
  198 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
199 199 "Conductor No 2")])
200 200 ])
201 201 ])]).
202   -text('Black',655,182,1,0,1,144,16,309,13,3,0,0,0,0,-65534,144,16,0,0,"",0,0,0,0,195,'',[
203   -minilines(144,16,0,0,0,0,0,[
204   -mini_line(144,13,3,0,0,0,[
205   -str_block(0,144,13,3,0,-2,0,0,0,[
206   -str_seg('Black','Courier',0,80640,144,13,3,0,-2,0,0,0,0,0,
  202 +text('Black',655,183,1,0,1,144,15,309,12,3,0,0,0,0,-65534,144,15,0,0,"",0,0,0,0,195,'',[
  203 +minilines(144,15,0,0,0,0,0,[
  204 +mini_line(144,12,3,0,0,0,[
  205 +str_block(0,144,12,3,0,-2,0,0,0,[
  206 +str_seg('Black','Courier',0,80640,144,12,3,0,-2,0,0,0,0,0,
207 207 "Shield thickness")])
208 208 ])
209 209 ])]).
... ...
DOCUMENTATION/USER_GUIDE/Imgs/FD_Twisted_pair.eps
  Diff comments   View file @9f62fb9
1 1 %!PS-Adobe-3.0 EPSF-3.0
2 2 %%BoundingBox: 35 632 440 780
3 3 %%Title: FD_Twisted_pair
4   -%%CreationDate: Fri Nov 18 11:37:21 2016
  4 +%%CreationDate: Fri Jul 6 11:09:17 2018
5 5 %%Creator: Tgif-4.2.5-QPL written by William Chia-Wei Cheng (bill.cheng@acm.org)
6 6 %%ProducedBy: (unknown)
7 7 %%Pages: 1
... ... @@ -178,7 +178,7 @@ NP
178 178 0 SG
179 179 GS
180 180 1 W
181   - 515 295 M
  181 + 530 300 M
182 182 GS
183 183 0 SG
184 184 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -197,7 +197,7 @@ NP
197 197 /Courier FF [14 0 0 -14 0 0] MS
198 198 (Frequency Dependent Dielectric) SH
199 199 GR
200   - 0 16 RM
  200 + 0 15 RM
201 201 GS
202 202 0 SG
203 203 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -275,13 +275,13 @@ NP
275 275 0 SG
276 276 GS
277 277 1 W
278   - 315 230 M
  278 + 310 235 M
279 279 GS
280 280 0 SG
281 281 /Courier FF [14 0 0 -14 0 0] MS
282 282 (Conductor ) SH
283 283 GR
284   - 0 16 RM
  284 + 0 15 RM
285 285 GS
286 286 0 SG
287 287 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -404,7 +404,7 @@ NP
404 404 0 SG
405 405 GS
406 406 1 W
407   - 530 245 M
  407 + 535 245 M
408 408 GS
409 409 0 SG
410 410 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -418,6 +418,6 @@ end
418 418 showpage
419 419  
420 420 %%Trailer
421   -%MatchingCreationDate: Fri Nov 18 11:37:21 2016
  421 +%MatchingCreationDate: Fri Jul 6 11:09:17 2018
422 422 %%DocumentFonts: Courier
423 423 %%EOF
... ...
DOCUMENTATION/USER_GUIDE/Imgs/FD_Twisted_pair.obj
  Diff comments   View file @9f62fb9
... ... @@ -66,11 +66,11 @@ spline_tightness(1).
66 66 page(1,"",1,'').
67 67 oval('Black','',327,117,413,203,0,3,1,0,0,0,0,0,0,'3',0,[
68 68 ]).
69   -text('Black',330,342,1,0,1,108,16,27,13,3,0,0,0,0,-65534,108,16,0,0,"",0,0,0,0,355,'',[
70   -minilines(108,16,0,0,0,0,0,[
71   -mini_line(108,13,3,0,0,0,[
72   -str_block(0,108,13,3,0,-1,0,0,0,[
73   -str_seg('Black','Courier',0,80640,108,13,3,0,-1,0,0,0,0,0,
  69 +text('Black',330,343,1,0,1,108,15,27,12,3,0,0,0,0,-65534,108,15,0,0,"",0,0,0,0,355,'',[
  70 +minilines(108,15,0,0,0,0,0,[
  71 +mini_line(108,12,3,0,0,0,[
  72 +str_block(0,108,12,3,0,-1,0,0,0,[
  73 +str_seg('Black','Courier',0,80640,108,12,3,0,-1,0,0,0,0,0,
74 74 "Twisted Pair")])
75 75 ])
76 76 ])]).
... ... @@ -79,24 +79,24 @@ poly('Black','',2,[
79 79 "0","",[
80 80 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
81 81 ]).
82   -text('Black',515,282,1,0,1,144,16,173,13,3,0,0,0,0,-65534,144,16,0,0,"",0,0,0,0,295,'',[
83   -minilines(144,16,0,0,0,0,0,[
84   -mini_line(144,13,3,0,0,0,[
85   -str_block(0,144,13,3,0,-2,0,0,0,[
86   -str_seg('Black','Courier',0,80640,144,13,3,0,-2,0,0,0,0,0,
  82 +text('Black',530,288,1,0,1,144,15,173,12,3,0,0,0,0,-65534,144,15,0,0,"",0,0,0,0,300,'',[
  83 +minilines(144,15,0,0,0,0,0,[
  84 +mini_line(144,12,3,0,0,0,[
  85 +str_block(0,144,12,3,0,-2,0,0,0,[
  86 +str_seg('Black','Courier',0,80640,144,12,3,0,-2,0,0,0,0,0,
87 87 "Conductor radius")])
88 88 ])
89 89 ])]).
90   -text('Black',510,162,2,0,1,270,32,218,13,3,0,0,0,0,-65534,270,32,0,0,"",0,0,0,0,175,'',[
91   -minilines(270,32,0,0,0,0,0,[
92   -mini_line(270,13,3,0,0,0,[
93   -str_block(0,270,13,3,0,-1,0,0,0,[
94   -str_seg('Black','Courier',0,80640,270,13,3,0,-1,0,0,0,0,0,
  90 +text('Black',510,163,2,0,1,270,30,218,12,3,0,0,0,0,-65534,270,30,0,0,"",0,0,0,0,175,'',[
  91 +minilines(270,30,0,0,0,0,0,[
  92 +mini_line(270,12,3,0,0,0,[
  93 +str_block(0,270,12,3,0,-1,0,0,0,[
  94 +str_seg('Black','Courier',0,80640,270,12,3,0,-1,0,0,0,0,0,
95 95 "Frequency Dependent Dielectric")])
96 96 ]),
97   -mini_line(189,13,3,0,0,0,[
98   -str_block(0,189,13,3,0,-1,0,0,0,[
99   -str_seg('Black','Courier',0,80640,189,13,3,0,-1,0,0,0,0,0,
  97 +mini_line(189,12,3,0,0,0,[
  98 +str_block(0,189,12,3,0,-1,0,0,0,[
  99 +str_seg('Black','Courier',0,80640,189,12,3,0,-1,0,0,0,0,0,
100 100 "relative permittivity")])
101 101 ])
102 102 ])]).
... ... @@ -112,16 +112,16 @@ poly('Black','',2,[
112 112 "0","",[
113 113 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
114 114 ]).
115   -text('Black',315,217,2,0,1,90,32,235,13,3,0,0,0,0,-65534,90,32,0,0,"",0,0,0,0,230,'',[
116   -minilines(90,32,0,0,0,0,0,[
117   -mini_line(90,13,3,0,0,0,[
118   -str_block(0,90,13,3,0,-8,0,0,0,[
119   -str_seg('Black','Courier',0,80640,90,13,3,0,-8,0,0,0,0,0,
  115 +text('Black',310,223,2,0,1,90,30,235,12,3,0,0,0,0,-65534,90,30,0,0,"",0,0,0,0,235,'',[
  116 +minilines(90,30,0,0,0,0,0,[
  117 +mini_line(90,12,3,0,0,0,[
  118 +str_block(0,90,12,3,0,-8,0,0,0,[
  119 +str_seg('Black','Courier',0,80640,90,12,3,0,-8,0,0,0,0,0,
120 120 "Conductor ")])
121 121 ]),
122   -mini_line(90,13,3,0,0,0,[
123   -str_block(0,90,13,3,0,-1,0,0,0,[
124   -str_seg('Black','Courier',0,80640,90,13,3,0,-1,0,0,0,0,0,
  122 +mini_line(90,12,3,0,0,0,[
  123 +str_block(0,90,12,3,0,-1,0,0,0,[
  124 +str_seg('Black','Courier',0,80640,90,12,3,0,-1,0,0,0,0,0,
125 125 "separation")])
126 126 ])
127 127 ])]).
... ... @@ -135,19 +135,19 @@ poly('Black','',2,[
135 135 "0","",[
136 136 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
137 137 ]).
138   -text('Black',65,142,1,0,1,126,16,242,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,155,'',[
139   -minilines(126,16,0,0,0,0,0,[
140   -mini_line(126,13,3,0,0,0,[
141   -str_block(0,126,13,3,0,-3,0,0,0,[
142   -str_seg('Black','Courier',0,80640,126,13,3,0,-3,0,0,0,0,0,
  138 +text('Black',65,143,1,0,1,126,15,242,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,155,'',[
  139 +minilines(126,15,0,0,0,0,0,[
  140 +mini_line(126,12,3,0,0,0,[
  141 +str_block(0,126,12,3,0,-3,0,0,0,[
  142 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
143 143 "Conductor No 1")])
144 144 ])
145 145 ])]).
146   -text('Black',65,267,1,0,1,126,16,245,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,280,'',[
147   -minilines(126,16,0,0,0,0,0,[
148   -mini_line(126,13,3,0,0,0,[
149   -str_block(0,126,13,3,0,-2,0,0,0,[
150   -str_seg('Black','Courier',0,80640,126,13,3,0,-2,0,0,0,0,0,
  146 +text('Black',65,268,1,0,1,126,15,245,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,280,'',[
  147 +minilines(126,15,0,0,0,0,0,[
  148 +mini_line(126,12,3,0,0,0,[
  149 +str_block(0,126,12,3,0,-3,0,0,0,[
  150 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
151 151 "Conductor No 2")])
152 152 ])
153 153 ])]).
... ... @@ -160,11 +160,11 @@ poly('Black','',2,[
160 160 "0","",[
161 161 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
162 162 ]).
163   -text('Black',530,232,1,0,1,153,16,269,13,3,0,0,0,0,-65534,153,16,0,0,"",0,0,0,0,245,'',[
164   -minilines(153,16,0,0,0,0,0,[
165   -mini_line(153,13,3,0,0,0,[
166   -str_block(0,153,13,3,0,-2,0,0,0,[
167   -str_seg('Black','Courier',0,80640,153,13,3,0,-2,0,0,0,0,0,
  163 +text('Black',535,233,1,0,1,153,15,269,12,3,0,0,0,0,-65534,153,15,0,0,"",0,0,0,0,245,'',[
  164 +minilines(153,15,0,0,0,0,0,[
  165 +mini_line(153,12,3,0,0,0,[
  166 +str_block(0,153,12,3,0,-2,0,0,0,[
  167 +str_seg('Black','Courier',0,80640,153,12,3,0,-2,0,0,0,0,0,
168 168 "Dielectric radius")])
169 169 ])
170 170 ])]).
... ...
DOCUMENTATION/USER_GUIDE/Imgs/ZT_FD_Twinax.eps
  Diff comments   View file @9f62fb9
1 1 %!PS-Adobe-3.0 EPSF-3.0
2 2 %%BoundingBox: 35 590 442 821
3 3 %%Title: ZT_FD_Twinax
4   -%%CreationDate: Wed May 3 16:04:06 2017
  4 +%%CreationDate: Fri Jul 6 11:08:05 2018
5 5 %%Creator: Tgif-4.2.5-QPL written by William Chia-Wei Cheng (bill.cheng@acm.org)
6 6 %%ProducedBy: (unknown)
7 7 %%Pages: 1
... ... @@ -195,7 +195,7 @@ NP
195 195 /Courier FF [14 0 0 -14 0 0] MS
196 196 (Inner conductor) SH
197 197 GR
198   - 0 16 RM
  198 + 0 15 RM
199 199 GS
200 200 0 SG
201 201 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -246,13 +246,13 @@ NP
246 246 /Courier FF [14 0 0 -14 0 0] MS
247 247 (Outer ) SH
248 248 GR
249   - 0 16 RM
  249 + 0 15 RM
250 250 GS
251 251 0 SG
252 252 /Courier FF [14 0 0 -14 0 0] MS
253 253 (dielectric) SH
254 254 GR
255   - 0 16 RM
  255 + 0 15 RM
256 256 GS
257 257 0 SG
258 258 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -274,7 +274,7 @@ NP
274 274 0 SG
275 275 GS
276 276 1 W
277   - 555 160 M
  277 + 585 150 M
278 278 GS
279 279 0 SG
280 280 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -315,7 +315,7 @@ NP
315 315 /Courier FF [14 0 0 -14 0 0] MS
316 316 (Outer dielectric) SH
317 317 GR
318   - 0 16 RM
  318 + 0 15 RM
319 319 GS
320 320 0 SG
321 321 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -334,7 +334,7 @@ NP
334 334 /Courier FF [14 0 0 -14 0 0] MS
335 335 (Inner dielectric) SH
336 336 GR
337   - 0 16 RM
  337 + 0 15 RM
338 338 GS
339 339 0 SG
340 340 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -434,19 +434,19 @@ NP
434 434 0 SG
435 435 GS
436 436 1 W
437   - 290 200 M
  437 + 290 195 M
438 438 GS
439 439 0 SG
440 440 /Courier FF [14 0 0 -14 0 0] MS
441 441 (Inner ) SH
442 442 GR
443   - 0 16 RM
  443 + 0 15 RM
444 444 GS
445 445 0 SG
446 446 /Courier FF [14 0 0 -14 0 0] MS
447 447 (conductor ) SH
448 448 GR
449   - 0 16 RM
  449 + 0 15 RM
450 450 GS
451 451 0 SG
452 452 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -645,7 +645,7 @@ NP
645 645 /Courier FF [14 0 0 -14 0 0] MS
646 646 (Inner dielectric) SH
647 647 GR
648   - 0 16 RM
  648 + 0 15 RM
649 649 GS
650 650 0 SG
651 651 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -659,6 +659,6 @@ end
659 659 showpage
660 660  
661 661 %%Trailer
662   -%MatchingCreationDate: Wed May 3 16:04:06 2017
  662 +%MatchingCreationDate: Fri Jul 6 11:08:05 2018
663 663 %%DocumentFonts: Courier
664 664 %%EOF
... ...
DOCUMENTATION/USER_GUIDE/Imgs/ZT_FD_Twinax.obj
  Diff comments   View file @9f62fb9
... ... @@ -66,11 +66,11 @@ spline_tightness(1).
66 66 page(1,"",1,'').
67 67 oval('Black','',372,102,458,188,0,3,1,0,0,0,0,0,0,'3',0,[
68 68 ]).
69   -text('Black',180,417,1,0,1,504,16,27,13,3,0,0,0,0,-65534,504,16,0,0,"",0,0,0,0,430,'',[
70   -minilines(504,16,0,0,0,0,0,[
71   -mini_line(504,13,3,0,0,0,[
72   -str_block(0,504,13,3,0,-1,0,0,0,[
73   -str_seg('Black','Courier',0,80640,504,13,3,0,-1,0,0,0,0,0,
  69 +text('Black',180,418,1,0,1,504,15,27,12,3,0,0,0,0,-65534,504,15,0,0,"",0,0,0,0,430,'',[
  70 +minilines(504,15,0,0,0,0,0,[
  71 +mini_line(504,12,3,0,0,0,[
  72 +str_block(0,504,12,3,0,-1,0,0,0,[
  73 +str_seg('Black','Courier',0,80640,504,12,3,0,-1,0,0,0,0,0,
74 74 "Frequency dependent twinax cable with transfer impedance")])
75 75 ])
76 76 ])]).
... ... @@ -79,16 +79,16 @@ poly('Black','',2,[
79 79 "0","",[
80 80 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
81 81 ]).
82   -text('Black',585,337,2,0,1,135,32,173,13,3,0,0,0,0,-65534,135,32,0,0,"",0,0,0,0,350,'',[
83   -minilines(135,32,0,0,0,0,0,[
84   -mini_line(135,13,3,0,0,0,[
85   -str_block(0,135,13,3,0,-1,0,0,0,[
86   -str_seg('Black','Courier',0,80640,135,13,3,0,-1,0,0,0,0,0,
  82 +text('Black',585,338,2,0,1,135,30,173,12,3,0,0,0,0,-65534,135,30,0,0,"",0,0,0,0,350,'',[
  83 +minilines(135,30,0,0,0,0,0,[
  84 +mini_line(135,12,3,0,0,0,[
  85 +str_block(0,135,12,3,0,-1,0,0,0,[
  86 +str_seg('Black','Courier',0,80640,135,12,3,0,-1,0,0,0,0,0,
87 87 "Inner conductor")])
88 88 ]),
89   -mini_line(63,13,3,0,0,0,[
90   -str_block(0,63,13,3,0,-2,0,0,0,[
91   -str_seg('Black','Courier',0,80640,63,13,3,0,-2,0,0,0,0,0,
  89 +mini_line(63,12,3,0,0,0,[
  90 +str_block(0,63,12,3,0,-2,0,0,0,[
  91 +str_seg('Black','Courier',0,80640,63,12,3,0,-2,0,0,0,0,0,
92 92 " radius")])
93 93 ])
94 94 ])]).
... ... @@ -99,31 +99,31 @@ poly('Black','',2,[
99 99 "0","",[
100 100 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
101 101 ]).
102   -text('Black',515,27,3,0,1,90,48,198,13,3,0,0,0,0,-65534,90,48,0,0,"",0,0,0,0,40,'',[
103   -minilines(90,48,0,0,0,0,0,[
104   -mini_line(54,13,3,0,0,0,[
105   -str_block(0,54,13,3,0,-8,0,0,0,[
106   -str_seg('Black','Courier',0,80640,54,13,3,0,-8,0,0,0,0,0,
  102 +text('Black',515,28,3,0,1,90,45,198,12,3,0,0,0,0,-65534,90,45,0,0,"",0,0,0,0,40,'',[
  103 +minilines(90,45,0,0,0,0,0,[
  104 +mini_line(54,12,3,0,0,0,[
  105 +str_block(0,54,12,3,0,-8,0,0,0,[
  106 +str_seg('Black','Courier',0,80640,54,12,3,0,-8,0,0,0,0,0,
107 107 "Outer ")])
108 108 ]),
109   -mini_line(90,13,3,0,0,0,[
110   -str_block(0,90,13,3,0,-1,0,0,0,[
111   -str_seg('Black','Courier',0,80640,90,13,3,0,-1,0,0,0,0,0,
  109 +mini_line(90,12,3,0,0,0,[
  110 +str_block(0,90,12,3,0,-1,0,0,0,[
  111 +str_seg('Black','Courier',0,80640,90,12,3,0,-1,0,0,0,0,0,
112 112 "dielectric")])
113 113 ]),
114   -mini_line(54,13,3,0,0,0,[
115   -str_block(0,54,13,3,0,-2,0,0,0,[
116   -str_seg('Black','Courier',0,80640,54,13,3,0,-2,0,0,0,0,0,
  114 +mini_line(54,12,3,0,0,0,[
  115 +str_block(0,54,12,3,0,-2,0,0,0,[
  116 +str_seg('Black','Courier',0,80640,54,12,3,0,-2,0,0,0,0,0,
117 117 "radius")])
118 118 ])
119 119 ])]).
120 120 oval('Black','',250,50,580,370,0,1,1,200,0,0,0,0,0,'1',0,[
121 121 ]).
122   -text('Black',555,147,1,0,1,117,16,211,13,3,0,0,0,0,-65534,117,16,0,0,"",0,0,0,0,160,'',[
123   -minilines(117,16,0,0,0,0,0,[
124   -mini_line(117,13,3,0,0,0,[
125   -str_block(0,117,13,3,0,-2,0,0,0,[
126   -str_seg('Black','Courier',0,80640,117,13,3,0,-2,0,0,0,0,0,
  122 +text('Black',585,138,1,0,1,117,15,211,12,3,0,0,0,0,-65534,117,15,0,0,"",0,0,0,0,150,'',[
  123 +minilines(117,15,0,0,0,0,0,[
  124 +mini_line(117,12,3,0,0,0,[
  125 +str_block(0,117,12,3,0,-2,0,0,0,[
  126 +str_seg('Black','Courier',0,80640,117,12,3,0,-2,0,0,0,0,0,
127 127 "Shield radius")])
128 128 ])
129 129 ])]).
... ... @@ -132,29 +132,29 @@ poly('Black','',2,[
132 132 "0","",[
133 133 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
134 134 ]).
135   -text('Black',570,82,2,0,1,189,32,217,13,3,0,0,0,0,-65534,189,32,0,0,"",0,0,0,0,95,'',[
136   -minilines(189,32,0,0,0,0,0,[
137   -mini_line(144,13,3,0,0,0,[
138   -str_block(0,144,13,3,0,-1,0,0,0,[
139   -str_seg('Black','Courier',0,80640,144,13,3,0,-1,0,0,0,0,0,
  135 +text('Black',570,83,2,0,1,189,30,217,12,3,0,0,0,0,-65534,189,30,0,0,"",0,0,0,0,95,'',[
  136 +minilines(189,30,0,0,0,0,0,[
  137 +mini_line(144,12,3,0,0,0,[
  138 +str_block(0,144,12,3,0,-1,0,0,0,[
  139 +str_seg('Black','Courier',0,80640,144,12,3,0,-1,0,0,0,0,0,
140 140 "Outer dielectric")])
141 141 ]),
142   -mini_line(189,13,3,0,0,0,[
143   -str_block(0,189,13,3,0,-1,0,0,0,[
144   -str_seg('Black','Courier',0,80640,189,13,3,0,-1,0,0,0,0,0,
  142 +mini_line(189,12,3,0,0,0,[
  143 +str_block(0,189,12,3,0,-1,0,0,0,[
  144 +str_seg('Black','Courier',0,80640,189,12,3,0,-1,0,0,0,0,0,
145 145 "relative permittivity")])
146 146 ])
147 147 ])]).
148   -text('Black',595,217,2,0,1,189,32,218,13,3,0,0,0,0,-65534,189,32,0,0,"",0,0,0,0,230,'',[
149   -minilines(189,32,0,0,0,0,0,[
150   -mini_line(144,13,3,0,0,0,[
151   -str_block(0,144,13,3,0,-1,0,0,0,[
152   -str_seg('Black','Courier',0,80640,144,13,3,0,-1,0,0,0,0,0,
  148 +text('Black',595,218,2,0,1,189,30,218,12,3,0,0,0,0,-65534,189,30,0,0,"",0,0,0,0,230,'',[
  149 +minilines(189,30,0,0,0,0,0,[
  150 +mini_line(144,12,3,0,0,0,[
  151 +str_block(0,144,12,3,0,-1,0,0,0,[
  152 +str_seg('Black','Courier',0,80640,144,12,3,0,-1,0,0,0,0,0,
153 153 "Inner dielectric")])
154 154 ]),
155   -mini_line(189,13,3,0,0,0,[
156   -str_block(0,189,13,3,0,-1,0,0,0,[
157   -str_seg('Black','Courier',0,80640,189,13,3,0,-1,0,0,0,0,0,
  155 +mini_line(189,12,3,0,0,0,[
  156 +str_block(0,189,12,3,0,-1,0,0,0,[
  157 +str_seg('Black','Courier',0,80640,189,12,3,0,-1,0,0,0,0,0,
158 158 "relative permittivity")])
159 159 ])
160 160 ])]).
... ... @@ -175,21 +175,21 @@ poly('Black','',2,[
175 175 "0","",[
176 176 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
177 177 ]).
178   -text('Black',290,187,3,0,1,90,48,235,13,3,0,0,0,0,-65534,90,48,0,0,"",0,0,0,0,200,'',[
179   -minilines(90,48,0,0,0,0,0,[
180   -mini_line(54,13,3,0,0,0,[
181   -str_block(0,54,13,3,0,-8,0,0,0,[
182   -str_seg('Black','Courier',0,80640,54,13,3,0,-8,0,0,0,0,0,
  178 +text('Black',290,183,3,0,1,90,45,235,12,3,0,0,0,0,-65534,90,45,0,0,"",0,0,0,0,195,'',[
  179 +minilines(90,45,0,0,0,0,0,[
  180 +mini_line(54,12,3,0,0,0,[
  181 +str_block(0,54,12,3,0,-8,0,0,0,[
  182 +str_seg('Black','Courier',0,80640,54,12,3,0,-8,0,0,0,0,0,
183 183 "Inner ")])
184 184 ]),
185   -mini_line(90,13,3,0,0,0,[
186   -str_block(0,90,13,3,0,-8,0,0,0,[
187   -str_seg('Black','Courier',0,80640,90,13,3,0,-8,0,0,0,0,0,
  185 +mini_line(90,12,3,0,0,0,[
  186 +str_block(0,90,12,3,0,-8,0,0,0,[
  187 +str_seg('Black','Courier',0,80640,90,12,3,0,-8,0,0,0,0,0,
188 188 "conductor ")])
189 189 ]),
190   -mini_line(90,13,3,0,0,0,[
191   -str_block(0,90,13,3,0,-1,0,0,0,[
192   -str_seg('Black','Courier',0,80640,90,13,3,0,-1,0,0,0,0,0,
  190 +mini_line(90,12,3,0,0,0,[
  191 +str_block(0,90,12,3,0,-1,0,0,0,[
  192 +str_seg('Black','Courier',0,80640,90,12,3,0,-1,0,0,0,0,0,
193 193 "separation")])
194 194 ])
195 195 ])]).
... ... @@ -208,27 +208,27 @@ poly('Black','',2,[
208 208 "0","",[
209 209 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
210 210 ]).
211   -text('Black',65,142,1,0,1,126,16,242,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,155,'',[
212   -minilines(126,16,0,0,0,0,0,[
213   -mini_line(126,13,3,0,0,0,[
214   -str_block(0,126,13,3,0,-3,0,0,0,[
215   -str_seg('Black','Courier',0,80640,126,13,3,0,-3,0,0,0,0,0,
  211 +text('Black',65,143,1,0,1,126,15,242,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,155,'',[
  212 +minilines(126,15,0,0,0,0,0,[
  213 +mini_line(126,12,3,0,0,0,[
  214 +str_block(0,126,12,3,0,-3,0,0,0,[
  215 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
216 216 "Conductor No 1")])
217 217 ])
218 218 ])]).
219   -text('Black',70,247,1,0,1,126,16,245,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,260,'',[
220   -minilines(126,16,0,0,0,0,0,[
221   -mini_line(126,13,3,0,0,0,[
222   -str_block(0,126,13,3,0,-2,0,0,0,[
223   -str_seg('Black','Courier',0,80640,126,13,3,0,-2,0,0,0,0,0,
  219 +text('Black',70,248,1,0,1,126,15,245,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,260,'',[
  220 +minilines(126,15,0,0,0,0,0,[
  221 +mini_line(126,12,3,0,0,0,[
  222 +str_block(0,126,12,3,0,-3,0,0,0,[
  223 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
224 224 "Conductor No 2")])
225 225 ])
226 226 ])]).
227   -text('Black',70,317,1,0,1,126,16,246,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,330,'',[
228   -minilines(126,16,0,0,0,0,0,[
229   -mini_line(126,13,3,0,0,0,[
230   -str_block(0,126,13,3,0,-2,0,0,0,[
231   -str_seg('Black','Courier',0,80640,126,13,3,0,-2,0,0,0,0,0,
  227 +text('Black',70,318,1,0,1,126,15,246,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,330,'',[
  228 +minilines(126,15,0,0,0,0,0,[
  229 +mini_line(126,12,3,0,0,0,[
  230 +str_block(0,126,12,3,0,-2,0,0,0,[
  231 +str_seg('Black','Courier',0,80640,126,12,3,0,-2,0,0,0,0,0,
232 232 "Conductor No 3")])
233 233 ])
234 234 ])]).
... ... @@ -251,16 +251,16 @@ poly('Black','',3,[
251 251 "0","",[
252 252 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
253 253 ]).
254   -text('Black',565,377,2,0,1,144,32,266,13,3,0,0,0,0,-65534,144,32,0,0,"",0,0,0,0,390,'',[
255   -minilines(144,32,0,0,0,0,0,[
256   -mini_line(144,13,3,0,0,0,[
257   -str_block(0,144,13,3,0,-1,0,0,0,[
258   -str_seg('Black','Courier',0,80640,144,13,3,0,-1,0,0,0,0,0,
  254 +text('Black',565,378,2,0,1,144,30,266,12,3,0,0,0,0,-65534,144,30,0,0,"",0,0,0,0,390,'',[
  255 +minilines(144,30,0,0,0,0,0,[
  256 +mini_line(144,12,3,0,0,0,[
  257 +str_block(0,144,12,3,0,-1,0,0,0,[
  258 +str_seg('Black','Courier',0,80640,144,12,3,0,-1,0,0,0,0,0,
259 259 "Inner dielectric")])
260 260 ]),
261   -mini_line(63,13,3,0,0,0,[
262   -str_block(0,63,13,3,0,-2,0,0,0,[
263   -str_seg('Black','Courier',0,80640,63,13,3,0,-2,0,0,0,0,0,
  261 +mini_line(63,12,3,0,0,0,[
  262 +str_block(0,63,12,3,0,-2,0,0,0,[
  263 +str_seg('Black','Courier',0,80640,63,12,3,0,-2,0,0,0,0,0,
264 264 " radius")])
265 265 ])
266 266 ])]).
... ...
DOCUMENTATION/USER_GUIDE/Imgs/cylindrical_with_dielectric.eps
  Diff comments   View file @9f62fb9
1 1 %!PS-Adobe-3.0 EPSF-3.0
2   -%%BoundingBox: 51 638 310 768
  2 +%%BoundingBox: 51 638 317 770
3 3 %%Title: cylindrical_with_dielectric
4   -%%CreationDate: Fri Nov 18 11:37:14 2016
  4 +%%CreationDate: Fri Jul 6 11:13:23 2018
5 5 %%Creator: Tgif-4.2.5-QPL written by William Chia-Wei Cheng (bill.cheng@acm.org)
6 6 %%ProducedBy: (unknown)
7 7 %%Pages: 1
... ... @@ -112,7 +112,7 @@ end
112 112 %%EndProlog
113 113 %%Page: 1 1
114 114  
115   -%%PageBoundingBox: 51 638 310 768
  115 +%%PageBoundingBox: 51 638 317 770
116 116 tgifdict begin
117 117 /tgifsavedpage save def
118 118  
... ... @@ -178,13 +178,13 @@ NP
178 178 0 SG
179 179 GS
180 180 1 W
181   - 445 255 M
  181 + 480 270 M
182 182 GS
183 183 0 SG
184 184 /Courier FF [14 0 0 -14 0 0] MS
185 185 (conductor) SH
186 186 GR
187   - 0 16 RM
  187 + 0 15 RM
188 188 GS
189 189 0 SG
190 190 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -229,13 +229,13 @@ NP
229 229 0 SG
230 230 GS
231 231 1 W
232   - 460 145 M
  232 + 460 130 M
233 233 GS
234 234 0 SG
235 235 /Courier FF [14 0 0 -14 0 0] MS
236 236 (dielectric) SH
237 237 GR
238   - 0 16 RM
  238 + 0 15 RM
239 239 GS
240 240 0 SG
241 241 /Courier FF [14 0 0 -14 0 0] MS
... ... @@ -278,12 +278,24 @@ NP
278 278 GR
279 279 GR
280 280  
  281 +% POLY/OPEN-SPLINE
  282 +0 SG
  283 +GS
  284 + NP
  285 + 435 240 M
  286 + 470 265 L
  287 + 475 265 L
  288 + TGSM
  289 + 1 W
  290 + S
  291 +GR
  292 +
281 293 GR
282 294 tgifsavedpage restore
283 295 end
284 296 showpage
285 297  
286 298 %%Trailer
287   -%MatchingCreationDate: Fri Nov 18 11:37:14 2016
  299 +%MatchingCreationDate: Fri Jul 6 11:13:23 2018
288 300 %%DocumentFonts: Courier
289 301 %%EOF
... ...
DOCUMENTATION/USER_GUIDE/Imgs/cylindrical_with_dielectric.obj
  Diff comments   View file @9f62fb9
1 1 %TGIF 4.2.5-QPL
2   -state(0,37,100.000,0,0,0,16,1,0,1,1,0,0,1,0,1,0,'Courier',0,80640,0,0,1,5,0,0,1,1,0,16,0,0,1,1,1,1,1050,1485,1,0,2880,0).
  2 +state(0,37,100.000,241,101,1,16,1,0,1,1,0,0,0,0,1,0,'Courier',0,80640,0,0,1,5,0,1,1,1,0,16,0,0,1,1,1,1,1050,1485,1,0,2880,0).
3 3 %
4 4 % @(#)$Header$
5 5 % %W%
... ... @@ -66,11 +66,11 @@ spline_tightness(1).
66 66 page(1,"",1,'').
67 67 oval('Black','',337,157,448,263,0,3,1,0,0,0,0,0,0,'3',0,[
68 68 ]).
69   -text('Black',250,332,1,0,1,297,16,27,13,3,0,0,0,0,-65534,297,16,0,0,"",0,0,0,0,345,'',[
70   -minilines(297,16,0,0,0,0,0,[
71   -mini_line(297,13,3,0,0,0,[
72   -str_block(0,297,13,3,0,-1,0,0,0,[
73   -str_seg('Black','Courier',0,80640,297,13,3,0,-1,0,0,0,0,0,
  69 +text('Black',250,333,1,0,1,297,15,27,12,3,0,0,0,0,-65534,297,15,0,0,"",0,0,0,0,345,'',[
  70 +minilines(297,15,0,0,0,0,0,[
  71 +mini_line(297,12,3,0,0,0,[
  72 +str_block(0,297,12,3,0,-1,0,0,0,[
  73 +str_seg('Black','Courier',0,80640,297,12,3,0,-1,0,0,0,0,0,
74 74 "Cylindrical cable with dielectric")])
75 75 ])
76 76 ])]).
... ... @@ -79,16 +79,16 @@ poly('Black','',2,[
79 79 "0","",[
80 80 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
81 81 ]).
82   -text('Black',445,242,2,0,1,81,32,173,13,3,0,0,0,0,-65534,81,32,0,0,"",0,0,0,0,255,'',[
83   -minilines(81,32,0,0,0,0,0,[
84   -mini_line(81,13,3,0,0,0,[
85   -str_block(0,81,13,3,0,-1,0,0,0,[
86   -str_seg('Black','Courier',0,80640,81,13,3,0,-1,0,0,0,0,0,
  82 +text('Black',480,258,2,0,1,81,30,173,12,3,0,0,0,0,-65534,81,30,0,0,"",0,0,0,0,270,'',[
  83 +minilines(81,30,0,0,0,0,0,[
  84 +mini_line(81,12,3,0,0,0,[
  85 +str_block(0,81,12,3,0,-1,0,0,0,[
  86 +str_seg('Black','Courier',0,80640,81,12,3,0,-1,0,0,0,0,0,
87 87 "conductor")])
88 88 ]),
89   -mini_line(63,13,3,0,0,0,[
90   -str_block(0,63,13,3,0,-2,0,0,0,[
91   -str_seg('Black','Courier',0,80640,63,13,3,0,-2,0,0,0,0,0,
  89 +mini_line(63,12,3,0,0,0,[
  90 +str_block(0,63,12,3,0,-2,0,0,0,[
  91 +str_seg('Black','Courier',0,80640,63,12,3,0,-2,0,0,0,0,0,
92 92 " radius")])
93 93 ])
94 94 ])]).
... ... @@ -99,16 +99,16 @@ poly('Black','',2,[
99 99 "0","",[
100 100 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
101 101 ]).
102   -text('Black',460,132,2,0,1,90,32,198,13,3,0,0,0,0,-65534,90,32,0,0,"",0,0,0,0,145,'',[
103   -minilines(90,32,0,0,0,0,0,[
104   -mini_line(90,13,3,0,0,0,[
105   -str_block(0,90,13,3,0,-1,0,0,0,[
106   -str_seg('Black','Courier',0,80640,90,13,3,0,-1,0,0,0,0,0,
  102 +text('Black',460,118,2,0,1,90,30,198,12,3,0,0,0,0,-65534,90,30,0,0,"",0,0,0,0,130,'',[
  103 +minilines(90,30,0,0,0,0,0,[
  104 +mini_line(90,12,3,0,0,0,[
  105 +str_block(0,90,12,3,0,-1,0,0,0,[
  106 +str_seg('Black','Courier',0,80640,90,12,3,0,-1,0,0,0,0,0,
107 107 "dielectric")])
108 108 ]),
109   -mini_line(54,13,3,0,0,0,[
110   -str_block(0,54,13,3,0,-2,0,0,0,[
111   -str_seg('Black','Courier',0,80640,54,13,3,0,-2,0,0,0,0,0,
  109 +mini_line(54,12,3,0,0,0,[
  110 +str_block(0,54,12,3,0,-2,0,0,0,[
  111 +str_seg('Black','Courier',0,80640,54,12,3,0,-2,0,0,0,0,0,
112 112 "radius")])
113 113 ])
114 114 ])]).
... ... @@ -117,11 +117,16 @@ poly('Black','',2,[
117 117 "0","",[
118 118 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
119 119 ]).
120   -text('Black',95,207,1,0,1,126,16,289,13,3,0,0,0,0,-65534,126,16,0,0,"",0,0,0,0,220,'',[
121   -minilines(126,16,0,0,0,0,0,[
122   -mini_line(126,13,3,0,0,0,[
123   -str_block(0,126,13,3,0,-3,0,0,0,[
124   -str_seg('Black','Courier',0,80640,126,13,3,0,-3,0,0,0,0,0,
  120 +text('Black',95,208,1,0,1,126,15,289,12,3,0,0,0,0,-65534,126,15,0,0,"",0,0,0,0,220,'',[
  121 +minilines(126,15,0,0,0,0,0,[
  122 +mini_line(126,12,3,0,0,0,[
  123 +str_block(0,126,12,3,0,-3,0,0,0,[
  124 +str_seg('Black','Courier',0,80640,126,12,3,0,-3,0,0,0,0,0,
125 125 "Conductor No 1")])
126 126 ])
127 127 ])]).
  128 +poly('Black','',3,[
  129 + 435,240,470,265,475,265],0,1,1,290,0,0,0,0,0,0,0,'1',0,0,
  130 + "0","",[
  131 + 0,8,3,0,'8','3','0'],[0,8,3,0,'8','3','0'],[
  132 +]).
... ...
DOCUMENTATION/USER_GUIDE/Tex/creating_a_cable_model.tex
  Diff comments   View file @9f62fb9
... ... @@ -2,7 +2,7 @@
2 2  
3 3 \section{Introduction}
4 4  
5   -This chapter describes the creation of a cable model from specifications. The methods by which frequency dependent cable parameters (relative permittivity, finite conductivity loss models and transfer impedance models) are specified are described before detailing the specifications for each of the available cable types in turn. An example for each cable type is provided.
  5 +This chapter describes the creation of a cable model from specifications. The methods by which frequency dependent cable parameters (relative permittivity, finite conductivity loss models and transfer impedance models) are specified is described before detailing the specifications for each of the available cable types in turn. An example for each cable type is provided.
6 6  
7 7 \section{Cable Types} \label{Cable_types}
8 8  
... ... @@ -317,7 +317,7 @@ Cylindrical
317 317 Figure \ref{fig:ZT_FD_coax2} shows the cross section of the frequency dependent coaxial cable with transfer impedance and surface impedance loss.
318 318 A description of the cable parameters is given in table \ref{table_ZT_FD_Coax2} followed by an example.
319 319  
320   -The inductance and capacitance of the coaxial mode is always calculated using the analytic formulae \cite{PaulMTL}
  320 +The inductance and capacitance of the coaxial cable is always calculated using the analytic formulae \cite{PaulMTL}
321 321  
322 322 \begin{equation}
323 323 L=\frac{\mu_0}{2 \pi} \ln\left(\frac{r_s}{r_w}\right)
... ...
DOCUMENTATION/USER_GUIDE/Tex/running_with_GUI.tex
  Diff comments   View file @9f62fb9
... ... @@ -181,7 +181,7 @@ Figures \ref{fig:SW1_GUI_Cable_STP01}, \ref{fig:SW1_GUI_Cable_STP02} and \ref{fi
181 181  
182 182 \clearpage
183 183  
184   -The result is the creation of two files, STP.cable\_spec and STP.cable, the specification and model files respectively, within the \textbf{CABLE} folder of the MOD libray.
  184 +The result of building the shielded twisted pair cable model is the creation of two files, STP.cable\_spec and STP.cable, the specification and model files respectively, within the \textbf{CABLE} folder of the MOD libray.
185 185  
186 186 \vbox{%
187 187 \begin{verbatim}
... ... @@ -223,7 +223,7 @@ Once the position of the cable has been defined, clicking OK will add the cable
223 223  
224 224 \clearpage
225 225  
226   -From here further cables can be added to the bundle and/or a ground plane added, figure \ref{fig:SW1_GUI_Bundle_Spec04}. Finally the use of the Laplace solver to calculate inductance and capacitance matrices for the external domain and any overshielded domains (by default, approximate analytic formulae are used), figure \ref{fig:SW1_GUI_Bundle_Spec05}. See chapter \ref{Cable_bundle_spec_file_formats} for further information. As previously described, if the Laplace solver is used the mesh list will be populated and the meshes can be viewed by selecting them from the drop down list and a decision then made whether to refine the mesh or accept the default.
  226 +Further cables can be added to the bundle and/or a ground plane added, figure \ref{fig:SW1_GUI_Bundle_Spec04}. Finally the use of the Laplace solver to calculate inductance and capacitance matrices for the external domain and any overshielded domains (by default, approximate analytic formulae are used), figure \ref{fig:SW1_GUI_Bundle_Spec05}. See chapter \ref{Cable_bundle_spec_file_formats} for further information. As previously described, if the Laplace solver is used the mesh list will be populated and the meshes can be viewed by selecting them from the drop down list and a decision then made whether to refine the mesh or accept the default.
227 227  
228 228 \begin{figure}[h]
229 229 \centering
... ... @@ -282,7 +282,7 @@ A Spice cable bundle is built from a cable bundle model that exists in the MOD l
282 282 \label{fig:SW1_GUI_Spice_Spec02}
283 283 \end{figure}
284 284  
285   -From here the length of cable represented by the Spice model is set (1). An incident field may also be defined here (2), see chapter \ref{creating_a_spice_cable_bundle_model} for further information on the definition of an incident field. In order to include a transfer impedance model (3) the conductor number of the shield of interest must be specified along with the direction of the coupling. The coupling direction is specified as either +1 or -1 where +1 indicates coupling direction from inside the shield to outside and -1 indicates coupling from the outside to the inside, further information can again be found in chapter \ref{creating_a_spice_cable_bundle_model}.
  285 +As shown in figure \ref{fig:SW1_GUI_Spice_Spec02} the length of cable represented by the Spice model is set (1). An incident field may also be defined here (2), see chapter \ref{creating_a_spice_cable_bundle_model} for further information on the definition of an incident field. In order to include a transfer impedance model (3) the conductor number of the shield of interest must be specified along with the direction of the coupling. The coupling direction is specified as either +1 or -1 where +1 indicates coupling direction from inside the shield to outside and -1 indicates coupling from the outside to the inside, further information can again be found in chapter \ref{creating_a_spice_cable_bundle_model}.
286 286  
287 287 Once the Spice model has been completely specified, click \textbf{Save}. If the Spice model has been specified correctly clicking save will result in the button being greyed out, any errors will result in an appropriate error message indicating any incorrect or missing parameters. Next click build to generate the Spice model which should result in a \textbf{Run Status} dialogue box, figure \ref{fig:SW1_GUI_Spice_Spec03} indicating that the process has finished correctly. The Spice model form can now be closed. The result is the creation of the spice\_model\_spec file, two files defining the Spice library files (one each for LTspice and Ngspice) in the SPICE folder and their associated symbols in the SYMBOL FOLDER.
288 288  
... ... @@ -312,4 +312,4 @@ Once the Spice model has been completely specified, click \textbf{Save}. If the
312 312 \label{fig:SW1_GUI_Spice_Spec03}
313 313 \end{figure}
314 314  
315   -The process for building all Spice bundle models is similar to that , only differing in the individual description of the different cable geometries.
  315 +The process for building all Spice bundle models is similar to that described, only differing in the individual description of the different cable geometries.
... ...
clean_project
  Diff comments   View file @9f62fb9
... ... @@ -12,5 +12,5 @@ cd TEST_CASES
12 12 cd ..
13 13 #
14 14 cd DOCUMENTATION
15   -make clean
  15 +make clean_all
16 16 cd ..
... ...