create_spice_subcircuit_symbol.F90 19.8 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574
!
! This file is part of SACAMOS, State of the Art CAble MOdels for Spice. 
! It was developed by the University of Nottingham and the Netherlands Aerospace 
! Centre (NLR) for ESA under contract number 4000112765/14/NL/HK.
! 
! Copyright (C) 2016-2018 University of Nottingham
! 
! SACAMOS is free software: you can redistribute it and/or modify it under the 
! terms of the GNU General Public License as published by the Free Software 
! Foundation, either version 3 of the License, or (at your option) any later 
! version.
! 
! SACAMOS is distributed in the hope that it will be useful, but 
! WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 
! or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
! for more details.
! 
! A copy of the GNU General Public License version 3 can be found in the 
! file GNU_GPL_v3 in the root or at <http://www.gnu.org/licenses/>.
! 
! SACAMOS uses the EISPACK library (in /SRC/EISPACK). EISPACK is subject to 
! the GNU Lesser General Public License. A copy of the GNU Lesser General Public 
! License version can be found in the file GNU_LGPL in the root of EISPACK 
! (/SRC/EISPACK ) or at <http://www.gnu.org/licenses/>.
! 
! The University of Nottingham can be contacted at: ggiemr@nottingham.ac.uk
!
!
! File Contents:
! SUBROUTINE create_spice_subcircuit_symbol_NGspice
! SUBROUTINE create_spice_subcircuit_symbol_LTspice
! SUBROUTINE create_spice_subcircuit_symbol_Pspice
!
! NAME
!     create_spice_subcircuit_symbol_NGspice
!
! AUTHORS
!     Chris Smartt
!
! DESCRIPTION
!     This subroutine creates a symbol for the Spice subcircuit model for the cable bundle
!     to be used in schematic capture software
!
!     The file formats for Gschem can be found here: http://wiki.geda-project.org/geda:file_format_spec
!     
! COMMENTS
!     
!
! HISTORY
!
!     started 15/12/2015 CJS: STAGE_1 developments
!     2/8/2017 CJS: change filename path for the library file to be 
!     something that must be edited by the user/ GUI software
!     16/11/2017 CJS Include network synthesis process to replace s-domain transfer functions
!
!
SUBROUTINE create_spice_subcircuit_symbol_NGspice(spice_bundle_model)

USE type_specifications
USE general_module
USE constants
USE cable_module
USE cable_bundle_module
USE spice_cable_bundle_module
USE circuit_symbol_module

IMPLICIT NONE

! variables passed to the subroutine

TYPE(spice_model_specification_type),intent(IN) :: spice_bundle_model

! local variables

character(len=filename_length)    :: filename                    ! filename for the symbol file
character(len=filename_length)    :: spice_subcircuit_filename   ! filename for the associated spice sub-circuit model

integer :: n_conductors

integer :: ymax_symbol    ! maximum y extent of the symbol (depends on the number of conductors)

integer :: xpin1(2),xpin2(2)  ! pin x coordinates for ends 1 and 2 of the transmission line symbol
integer :: ypin               ! pin y coordinate

integer :: xpin_label(2)      ! x coordinate for conductor labels at ends 1 and 2 of the transmission line symbol
integer :: align_label(2)     ! alignment type for symbols

! loop variables
integer :: pin                ! pin number
integer :: end                ! end number
integer :: conductor          ! conductor number

! temporary strings
character(len=line_length)    :: string1
character(len=line_length)    :: string2

! pin label strings
character(len=line_length)    :: pinnumber_string
character(len=line_length)    :: pinseq_string
character(len=line_length)    :: pinlabel_string

! START
  
! filename for the symbol. The directory for the symbol is read from the 
! .spice_model_spec file (i.e. specified by the GUI)

  filename=trim(spice_symbol_dir)//trim(spice_bundle_model%spice_model_name)//symbol_file_extn

! open the symbol file
  
  OPEN(unit=symbol_file_unit,file=filename)

  if (verbose) write(*,*)'Opened file:',trim(filename)

! calculate the size of the symbol from the number of conductors and set all symbol dimensions

  n_conductors=spice_bundle_model%bundle%tot_n_conductors

  ymax_symbol=ymin_offset+(n_conductors-1)*y_conductor_spacing+ymax_offset

! end 1 pin parameters # this could maybe go with parameters in the module...
  xpin1(1)=xmin_symbol-x_pin_length
  xpin2(1)=xmin_symbol
  
! end 2 pin parameters
  xpin1(2)=xmax_symbol+x_pin_length
  xpin2(2)=xmax_symbol
  
 ! write the header
  write(symbol_file_unit,'(A)')symbol_version

! write the rectangular box
  write(symbol_file_unit,'(A,4I6,A)')'L ',xmin_symbol,ymin_symbol,xmin_symbol,ymax_symbol,' 3 0 0 0 -1 -1'
  write(symbol_file_unit,'(A,4I6,A)')'L ',xmin_symbol,ymax_symbol,xmax_symbol,ymax_symbol,' 3 0 0 0 -1 -1'
  write(symbol_file_unit,'(A,4I6,A)')'L ',xmax_symbol,ymax_symbol,xmax_symbol,ymin_symbol,' 3 0 0 0 -1 -1'
  write(symbol_file_unit,'(A,4I6,A)')'L ',xmax_symbol,ymin_symbol,xmin_symbol,ymin_symbol,' 3 0 0 0 -1 -1'

! write the connection pins  
  xpin_label(1)=xmin_symbol
  xpin_label(2)=xmax_symbol
  align_label(1)=1   ! left
  align_label(2)=7   ! right
  
  pin=0
  do end=1,2
  
    do conductor=1,n_conductors
    
      pin=pin+1
      ypin=ymax_symbol-ymax_offset-(conductor-1)*y_conductor_spacing
      
      string1='pinnumber='
      CALL add_integer_to_string(string1,pin,pinnumber_string)
      
      string1='pinseq='
      CALL add_integer_to_string(string1,pin,pinseq_string)

      string1='pinlabel=c'      
      CALL add_integer_to_string(string1,conductor,string2)
      string1=trim(string2)//'_e'
      CALL add_integer_to_string(string1,end,pinlabel_string)
      
      write(symbol_file_unit,'(A,4I6,A)')'P ',xpin1(end),ypin,xpin2(end),ypin,' 1 0 0'
      write(symbol_file_unit,'(A)')'{'
      write(symbol_file_unit,'(A)')'T 150 250   5 8 0 0 0 6 1'
      write(symbol_file_unit,'(A)')trim(pinnumber_string)
      write(symbol_file_unit,'(A)')'T 150 150   5 8 0 0 0 8 1'
      write(symbol_file_unit,'(A)')trim(pinseq_string)
      write(symbol_file_unit,'(A,2I6,A,I3,A)')'T ',xpin_label(end),ypin,' 9 6 1 1 0 ',align_label(end),' 1'
      write(symbol_file_unit,'(A)')trim(pinlabel_string)
      write(symbol_file_unit,'(A)')'T 200 200   5 8 0 0 0 2 1'
      write(symbol_file_unit,'(A)')'pintype=pas'
      write(symbol_file_unit,'(A)')'}'
    
    end do ! next conductor
    
  end do ! other cable end
  
!  spice_subcircuit_filename=trim(MOD_spice_bundle_lib_dir)//trim(spice_bundle_model%spice_model_name)//spice_model_file_extn
  spice_subcircuit_filename='PATH_TO_TRANSMISSION_LINE_SUB_CIRCUITS/'//  &
                            trim(spice_bundle_model%spice_model_name)//spice_model_file_extn
  
! write the general circuit symbol information
  write(symbol_file_unit,'(A,2I6,A)')'T ',(xmin_symbol+xmax_symbol)/2,ymax_symbol+2*ymax_text_offset,' 8 10 1 1 0 4 1'
  string1='device='//trim(spice_bundle_model%spice_model_name)  
  write(symbol_file_unit,'(A)')trim(string1)
  
  write(symbol_file_unit,'(A,2I6,A)')'T ',(xmin_symbol+xmax_symbol)/2,ymax_symbol+ymax_text_offset,' 5 10 1 0 0 4 1'
  write(symbol_file_unit,'(A)')'refdes=X?'

  write(symbol_file_unit,'(A,2I6,A)')'T ',xmin_symbol,ymin_symbol,' 8 10 0 0 0 4 1'
  string1='description='//trim(spice_bundle_model%spice_model_name)  
  write(symbol_file_unit,'(A)')trim(string1)

  write(symbol_file_unit,'(A,2I6,A)')'T ',xmin_symbol,ymin_symbol,' 8 10 0 0 0 0 1'
  string1='value='//trim(spice_bundle_model%spice_model_name)  
  write(symbol_file_unit,'(A)')trim(string1)

  write(symbol_file_unit,'(A,2I6,A)')'T ',xmin_symbol,ymin_symbol,' 8 10 0 0 0 0 1'
  write(symbol_file_unit,'(A,A)')'file=',trim(spice_subcircuit_filename)

  write(symbol_file_unit,'(A,2I6,A)')'T ',xmin_symbol,ymin_symbol,' 8 10 0 0 0 0 1'
  write(symbol_file_unit,'(A)')'numslots=0'

  write(symbol_file_unit,'(A,2I6,A)')'T ',xmin_symbol,ymin_symbol,' 8 10 0 0 0 0 1'
  write(symbol_file_unit,'(A)')'symversion=0.1'
  
! close the symbol file

  CLOSE(unit=symbol_file_unit)

  if (verbose) write(*,*)'Closed file:',trim(filename)

  RETURN

END SUBROUTINE create_spice_subcircuit_symbol_NGspice
!
! NAME
!     create_spice_subcircuit_symbol_LTspice
!
! AUTHORS
!     Chris Smartt
!
! DESCRIPTION
!     This subroutine creates a symbol for the Spice subcircuit model for the cable bundle
!     to be used in schematic capture software
!
!     The file formats for Gschem can be found here: http://wiki.geda-project.org/geda:file_format_spec
!     
! COMMENTS
!     
!
! HISTORY
!
!     started 20/3/2017 CJS
!     2/8/2017 CJS: change filename path for the library file to be 
!     something that must be edited by the user/ GUI software
!
!
SUBROUTINE create_spice_subcircuit_symbol_LTspice(spice_bundle_model)

USE type_specifications
USE general_module
USE constants
USE cable_module
USE cable_bundle_module
USE spice_cable_bundle_module
USE circuit_symbol_module

IMPLICIT NONE

! variables passed to the subroutine

TYPE(spice_model_specification_type),intent(IN) :: spice_bundle_model

! local variables

character(len=filename_length)    :: filename                    ! filename for the symbol file
character(len=filename_length)    :: spice_subcircuit_filename   ! filename for the associated spice sub-circuit model

integer :: n_conductors

integer :: LT_ymax_symbol    ! maximum y extent of the symbol (depends on the number of conductors)

integer :: LT_xpin1(2),LT_xpin2(2)  ! pin x coordinates for ends 1 and 2 of the transmission line symbol
integer :: LT_ypin                  ! pin y coordinate

integer :: xpin_label(2)      ! x coordinate for conductor labels at ends 1 and 2 of the transmission line symbol

! loop variables
integer :: pin                ! pin number
integer :: end                ! end number
integer :: conductor          ! conductor number

! temporary strings
character(len=line_length)    :: string1
character(len=line_length)    :: string2

! pin label strings
character(len=line_length)    :: pinnumber_string
character(len=line_length)    :: pinseq_string
character(len=line_length)    :: pinlabel_string

! START
  
! filename for the symbol. The directory for the symbol is read from the 
! .spice_model_spec file (i.e. specified by the GUI)

  filename=trim(spice_symbol_dir)//trim(spice_bundle_model%spice_model_name)//symbol_file_extn

! open the symbol file
  
  OPEN(unit=symbol_file_unit,file=filename)

  if (verbose) write(*,*)'Opened file:',trim(filename)

! calculate the size of the symbol from the number of conductors and set all symbol dimensions

  n_conductors=spice_bundle_model%bundle%tot_n_conductors

  LT_ymax_symbol=LT_ymin_offset+(n_conductors-1)*LT_y_conductor_spacing+LT_ymax_offset

! end 1 pin parameters # this could maybe go with parameters in the module...
  LT_xpin1(1)=LT_xmin_symbol-LT_x_pin_length
  LT_xpin2(1)=LT_xmin_symbol
  
! end 2 pin parameters
  LT_xpin1(2)=LT_xmax_symbol+LT_x_pin_length
  LT_xpin2(2)=LT_xmax_symbol
  
 ! write the header
  write(symbol_file_unit,'(A)')LT_symbol_version
  write(symbol_file_unit,'(A)')'SymbolType CELL'

! write the rectangular box
  write(symbol_file_unit,'(A,4I6)')'LINE Normal ',LT_xmin_symbol,LT_ymin_symbol,LT_xmin_symbol,LT_ymax_symbol
  write(symbol_file_unit,'(A,4I6)')'LINE Normal ',LT_xmin_symbol,LT_ymax_symbol,LT_xmax_symbol,LT_ymax_symbol
  write(symbol_file_unit,'(A,4I6)')'LINE Normal ',LT_xmax_symbol,LT_ymax_symbol,LT_xmax_symbol,LT_ymin_symbol
  write(symbol_file_unit,'(A,4I6)')'LINE Normal ',LT_xmax_symbol,LT_ymin_symbol,LT_xmin_symbol,LT_ymin_symbol

! write the connection wires to the pin positions    
  pin=0
  do end=1,2
  
    do conductor=1,n_conductors
    
      pin=pin+1
      
      LT_ypin=LT_ymax_symbol-LT_ymax_offset-(n_conductors-conductor)*LT_y_conductor_spacing
      
      write(symbol_file_unit,'(A,4I6)')'LINE Normal ',LT_xpin1(end),LT_ypin,LT_xpin2(end),LT_ypin
   
    end do ! next conductor
    
  end do ! other cable end
  
! write general information

  write(symbol_file_unit,'(A,2I6,A)')'WINDOW 3 ',(LT_xmin_symbol+LT_xmax_symbol)/2,-LT_ymax_text_offset,' centre 0'
  
  string1='Value '//trim(spice_bundle_model%spice_model_name)  
  write(symbol_file_unit,'(A,A)')'SYMATTR ',trim(string1)
  
  string1='Prefix X'
  write(symbol_file_unit,'(A,A)')'SYMATTR ',trim(string1)
  
!  spice_subcircuit_filename=trim(MOD_spice_bundle_lib_dir)//trim(spice_bundle_model%spice_model_name)//spice_model_file_extn  
  spice_subcircuit_filename='PATH_TO_TRANSMISSION_LINE_SUB_CIRCUITS/'//  &
                            trim(spice_bundle_model%spice_model_name)//spice_model_file_extn
  string1='ModelFile '//trim(spice_subcircuit_filename)
  write(symbol_file_unit,'(A,A)')'SYMATTR ',trim(string1)
  
! write the connection pins    
  pin=0
  do end=1,2
  
    do conductor=1,n_conductors
    
      pin=pin+1
      LT_ypin=LT_ymax_symbol-LT_ymax_offset-(n_conductors-conductor)*LT_y_conductor_spacing
      
      if (end.eq.1) then
        write(symbol_file_unit,'(A,2I6,A,I6)')'PIN ',LT_xpin1(end),LT_ypin,' LEFT ',LT_x_pin_length
      else
        write(symbol_file_unit,'(A,2I6,A,I6)')'PIN ',LT_xpin1(end),LT_ypin,' RIGHT ',LT_x_pin_length      
      end if
                
      string1='PinName c'      
      CALL add_integer_to_string(string1,conductor,string2)
      string1=trim(string2)//'_e'
      CALL add_integer_to_string(string1,end,pinlabel_string)
      write(symbol_file_unit,'(A,A)')'PINATTR ',trim(pinlabel_string)
         
      string1=''
      CALL add_integer_to_string(string1,pin,pinnumber_string)
      write(symbol_file_unit,'(A,A)')'PINATTR SpiceOrder ',trim(pinnumber_string)
   
    end do ! next conductor
    
  end do ! other cable end
  
  xpin_label(1)=LT_xmin_symbol
  xpin_label(2)=LT_xmax_symbol
  
! close the symbol file

  CLOSE(unit=symbol_file_unit)

  if (verbose) write(*,*)'Closed file:',trim(filename)

  RETURN

END SUBROUTINE create_spice_subcircuit_symbol_LTspice
!
! NAME
!     create_spice_subcircuit_symbol_Pspice
!
! AUTHORS
!     Chris Smartt
!
! DESCRIPTION
!     This subroutine creates a symbol for the Spice subcircuit model for the cable bundle
!     to be used in schematic capture software
!
!     The file formats for Gschem can be found here: http://wiki.geda-project.org/geda:file_format_spec
!     
! COMMENTS
!     
!
! HISTORY
!
!     started 15/12/2015 CJS: STAGE_1 developments
!
!
SUBROUTINE create_spice_subcircuit_symbol_Pspice(spice_bundle_model)

USE type_specifications
USE general_module
USE constants
USE cable_module
USE cable_bundle_module
USE spice_cable_bundle_module
USE circuit_symbol_module

IMPLICIT NONE

! variables passed to the subroutine

TYPE(spice_model_specification_type),intent(IN) :: spice_bundle_model

! local variables

character(len=filename_length)    :: filename                    ! filename for the symbol file
character(len=filename_length)    :: spice_subcircuit_filename   ! filename for the associated spice sub-circuit model

integer :: n_conductors

integer :: ymax_symbol    ! maximum y extent of the symbol (depends on the number of conductors)

integer :: xpin1(2),xpin2(2)  ! pin x coordinates for ends 1 and 2 of the transmission line symbol
integer :: ypin               ! pin y coordinate

integer :: xpin_label(2)      ! x coordinate for conductor labels at ends 1 and 2 of the transmission line symbol
integer :: align_label(2)     ! alignment type for symbols

! loop variables
integer :: pin                ! pin number
integer :: end                ! end number
integer :: conductor          ! conductor number

! temporary strings
character(len=line_length)    :: string1
character(len=line_length)    :: string2

! pin label strings
character(len=line_length)    :: pinnumber_string
character(len=line_length)    :: pinseq_string
character(len=line_length)    :: pinlabel_string

! START
  
! filename for the symbol. The directory for the symbol is read from the 
! .spice_model_spec file (i.e. specified by the GUI)

  filename=trim(spice_symbol_dir)//trim(spice_bundle_model%spice_model_name)//symbol_file_extn

! open the symbol file
  
  OPEN(unit=symbol_file_unit,file=filename)

  if (verbose) write(*,*)'Opened file:',trim(filename)

! calculate the size of the symbol from the number of conductors and set all symbol dimensions

  n_conductors=spice_bundle_model%bundle%tot_n_conductors

  ymax_symbol=ymin_offset+(n_conductors-1)*y_conductor_spacing+ymax_offset

! end 1 pin parameters # this could maybe go with parameters in the module...
  xpin1(1)=xmin_symbol-x_pin_length
  xpin2(1)=xmin_symbol
  
! end 2 pin parameters
  xpin1(2)=xmax_symbol+x_pin_length
  xpin2(2)=xmax_symbol
  
 ! write the header
  write(symbol_file_unit,'(A)')symbol_version

! write the rectangular box
  write(symbol_file_unit,'(A,4I6,A)')'L ',xmin_symbol,ymin_symbol,xmin_symbol,ymax_symbol,' 3 0 0 0 -1 -1'
  write(symbol_file_unit,'(A,4I6,A)')'L ',xmin_symbol,ymax_symbol,xmax_symbol,ymax_symbol,' 3 0 0 0 -1 -1'
  write(symbol_file_unit,'(A,4I6,A)')'L ',xmax_symbol,ymax_symbol,xmax_symbol,ymin_symbol,' 3 0 0 0 -1 -1'
  write(symbol_file_unit,'(A,4I6,A)')'L ',xmax_symbol,ymin_symbol,xmin_symbol,ymin_symbol,' 3 0 0 0 -1 -1'

! write the connection pins  
  xpin_label(1)=xmin_symbol
  xpin_label(2)=xmax_symbol
  align_label(1)=1   ! left
  align_label(2)=7   ! right
  
  pin=0
  do end=1,2
  
    do conductor=1,n_conductors
    
      pin=pin+1
      ypin=ymax_symbol-ymax_offset-(conductor-1)*y_conductor_spacing
      
      string1='pinnumber='
      CALL add_integer_to_string(string1,pin,pinnumber_string)
      
      string1='pinseq='
      CALL add_integer_to_string(string1,pin,pinseq_string)

      string1='pinlabel=c_'      
      CALL add_integer_to_string(string1,conductor,string2)
      string1=trim(string2)//'_e_'
      CALL add_integer_to_string(string1,end,pinlabel_string)
      
      write(symbol_file_unit,'(A,4I6,A)')'P ',xpin1(end),ypin,xpin2(end),ypin,' 1 0 0'
      write(symbol_file_unit,'(A)')'{'
      write(symbol_file_unit,'(A)')'T 150 250   5 8 0 0 0 6 1'
      write(symbol_file_unit,'(A)')trim(pinnumber_string)
      write(symbol_file_unit,'(A)')'T 150 150   5 8 0 0 0 8 1'
      write(symbol_file_unit,'(A)')trim(pinseq_string)
      write(symbol_file_unit,'(A,2I6,A,I3,A)')'T ',xpin_label(end),ypin,' 9 6 1 1 0 ',align_label(end),' 1'
      write(symbol_file_unit,'(A)')trim(pinlabel_string)
      write(symbol_file_unit,'(A)')'T 200 200   5 8 0 0 0 2 1'
      write(symbol_file_unit,'(A)')'pintype=pas'
      write(symbol_file_unit,'(A)')'}'
    
    end do ! next conductor
    
  end do ! other cable end
  
!  spice_subcircuit_filename=trim(MOD_spice_bundle_lib_dir)//trim(spice_bundle_model%spice_model_name)//spice_model_file_extn
  spice_subcircuit_filename='PATH_TO_TRANSMISSION_LINE_SUB_CIRCUITS/'//  &
                            trim(spice_bundle_model%spice_model_name)//spice_model_file_extn
  
! write the general circuit symbol information
  write(symbol_file_unit,'(A,2I6,A)')'T ',(xmin_symbol+xmax_symbol)/2,ymax_symbol+2*ymax_text_offset,' 8 10 1 1 0 4 1'
  string1='device='//trim(spice_bundle_model%spice_model_name)  
  write(symbol_file_unit,'(A)')trim(string1)
  
  write(symbol_file_unit,'(A,2I6,A)')'T ',(xmin_symbol+xmax_symbol)/2,ymax_symbol+ymax_text_offset,' 5 10 1 0 0 4 1'
  write(symbol_file_unit,'(A)')'refdes=X?'

  write(symbol_file_unit,'(A,2I6,A)')'T ',xmin_symbol,ymin_symbol,' 8 10 0 0 0 4 1'
  string1='description='//trim(spice_bundle_model%spice_model_name)  
  write(symbol_file_unit,'(A)')trim(string1)

  write(symbol_file_unit,'(A,2I6,A)')'T ',xmin_symbol,ymin_symbol,' 8 10 0 0 0 0 1'
  string1='value='//trim(spice_bundle_model%spice_model_name)  
  write(symbol_file_unit,'(A)')trim(string1)

  write(symbol_file_unit,'(A,2I6,A)')'T ',xmin_symbol,ymin_symbol,' 8 10 0 0 0 0 1'
  write(symbol_file_unit,'(A,A)')'file=',trim(spice_subcircuit_filename)

  write(symbol_file_unit,'(A,2I6,A)')'T ',xmin_symbol,ymin_symbol,' 8 10 0 0 0 0 1'
  write(symbol_file_unit,'(A)')'numslots=0'

  write(symbol_file_unit,'(A,2I6,A)')'T ',xmin_symbol,ymin_symbol,' 8 10 0 0 0 0 1'
  write(symbol_file_unit,'(A)')'symversion=0.1'
  
! close the symbol file

  CLOSE(unit=symbol_file_unit)

  if (verbose) write(*,*)'Closed file:',trim(filename)

  RETURN

END SUBROUTINE create_spice_subcircuit_symbol_Pspice