twinax.F90 12 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423
!
! This file is part of SACAMOS, State of the Art CAble MOdels in Spice. 
! It was developed by the University of Nottingham and the Netherlands Aerospace 
! Centre (NLR) for ESA under contract number 4000112765/14/NL/HK.
! 
! Copyright (C) 2016-2017 University of Nottingham
! 
! SACAMOS is free software: you can redistribute it and/or modify it under the 
! terms of the GNU General Public License as published by the Free Software 
! Foundation, either version 3 of the License, or (at your option) any later 
! version.
! 
! SACAMOS is distributed in the hope that it will be useful, but 
! WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 
! or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
! for more details.
! 
! A copy of the GNU General Public License version 3 can be found in the 
! file GNU_GPL_v3 in the root or at <http://www.gnu.org/licenses/>.
! 
! SACAMOS uses the EISPACK library (in /SRC/EISPACK). EISPACK is subject to 
! the GNU Lesser General Public License. A copy of the GNU Lesser General Public 
! License version can be found in the file GNU_LGPL in the root of EISPACK 
! (/SRC/EISPACK ) or at <http://www.gnu.org/licenses/>.
! 
! The University of Nottingham can be contacted at: ggiemr@nottingham.ac.uk
!
! File Contents:
! SUBROUTINE twinax_set_parameters
! SUBROUTINE twinax_set_internal_domain_information
! SUBROUTINE twinax_plot
!
! NAME
!     twinax_set_parameters
!
! AUTHORS
!     Chris Smartt
!
! DESCRIPTION
!     Set the overall parameters for a twinax cable
!
! COMMENTS
!      
!
! HISTORY
!
!     started 5/9/2016 CJS based on twinax.F90
!
!
SUBROUTINE twinax_set_parameters(cable)

USE type_specifications

IMPLICIT NONE

! variables passed to subroutine

  type(cable_specification_type),intent(INOUT)    :: cable

! local variables

! START

  cable%cable_type=cable_geometry_type_twinax
  cable%tot_n_conductors=3
  cable%tot_n_domains=2
  cable%n_external_conductors=1
  cable%n_internal_conductors=2
  cable%n_internal_domains=1
  cable%n_parameters=8
  cable%n_dielectric_filters=2
  cable%n_transfer_impedance_models=1

END SUBROUTINE twinax_set_parameters
!
! NAME
!     twinax_set_internal_domain_information
!
! AUTHORS
!     Chris Smartt
!
! DESCRIPTION
!     Set the overall parameters for a twinax cable
!
! COMMENTS
!     Set the dimension of the domain transformation matrices to include an external reference conductor for the cable 
!      
!
! HISTORY
!
!     started 5/9/2016 CJS based on twinax.F90
!     19/9/2016 CJS frequency dependent dielectric in Laplace solver
!     8/5/2017         CJS: Include references to Theory_Manual
!
!
SUBROUTINE twinax_set_internal_domain_information(cable)

USE type_specifications
USE constants
USE general_module
USE maths
USE PUL_parameter_module

IMPLICIT NONE

! variables passed to subroutine

  type(cable_specification_type),intent(INOUT)    :: cable

! local variables

  integer :: n_conductors
  integer :: dim

  integer :: domain

  type(PUL_type)    :: PUL
  
  integer :: ierr,i
  
  real(dp) :: epsr
 
! variables for cable parameter checks 
  logical :: cable_spec_error
  real(dp) :: rw
  real(dp) :: s
  real(dp) :: rd
  real(dp) :: rs
  real(dp) :: rd2
  real(dp) :: t
  real(dp) :: sigma_w
  real(dp) :: sigma_s
 
  type(Sfilter) :: epsr1,epsr2,ZT
  
  character(LEN=error_message_length) :: message 

! START

! Check the cable parameters

  rw=cable%parameters(1)
  rd=cable%parameters(2)
  s=cable%parameters(3)
  rs=cable%parameters(4)
  t=cable%parameters(5)
  rd2=cable%parameters(6)
  sigma_w=cable%parameters(7)
  sigma_s=cable%parameters(8)
  
  epsr1=cable%dielectric_filter(1)
  epsr2=cable%dielectric_filter(2)
  ZT=cable%transfer_impedance(1)
  
  cable_spec_error=.FALSE.    ! assume no errors initially
  message=''
  CALL shielded_twisted_pair_check(rw,rd,s,rs,rd2,cable_spec_error,cable%cable_name,message)
  CALL conductivity_check(sigma_w,cable_spec_error,cable%cable_name,message)
  CALL conductivity_check(sigma_s,cable_spec_error,cable%cable_name,message)
  CALL dielectric_check(epsr1,cable_spec_error,cable%cable_name,message)
  CALL dielectric_check(epsr2,cable_spec_error,cable%cable_name,message)
  CALL transfer_impedance_check(Zt,cable_spec_error,cable%cable_name,message)
  CALL surface_impedance_check(ZT,sigma_s,rs,t,cable_spec_error,cable%cable_name,message)
  
  if (cable_spec_error) then       
    run_status='ERROR in cable_model_builder, error on parameters for cable:'//trim(cable%cable_name)//'. '//trim(message)
    CALL write_program_status()
    STOP 1
  end if
    
! Set the parameters for the single internal domain  
  domain=1
    
  cable%n_internal_conductors_in_domain(domain)=3
    
! The number of modes in the internal domain is 2

  dim=2
  cable%L_domain(domain)%dim=dim
  ALLOCATE(cable%L_domain(domain)%mat(dim,dim))
  cable%C_domain(domain)%dim=dim
  ALLOCATE(cable%C_domain(domain)%mat(dim,dim))

  epsr=evaluate_Sfilter_high_frequency_limit(epsr1)
  
  if (use_laplace) then
  
! allocate memory for the PUL parameter solver interface

    if(verbose) write(*,*)'Domain:',domain
    if(verbose) write(*,*)'Allocating PUL data structure for twinax'
    n_conductors=3
    
    CALL allocate_and_reset_PUL_data(PUL,n_conductors)
    
    PUL%shape(1:n_conductors)=circle
    
    PUL%x(1)=-s/2d0
    PUL%y(1)=0.0
    PUL%r(1)=rw
    PUL%rd(1)=rd
    PUL%epsr(1)=epsr1
    
    PUL%x(2)=s/2d0
    PUL%y(2)=0.0
    PUL%r(2)=rw
    PUL%rd(2)=rd
    PUL%epsr(2)=epsr1
    
    PUL%epsr_background = 1d0  ! permittivity of homogeneous dielectric medium surrounding conductors (air)
    
! no ground plane
    PUL%ground_plane_present=.FALSE.
      
! add overshield i.e. the twinax shield
    PUL%overshield_present=.TRUE.
    PUL%overshield_x = 0d0          ! shield is centred at the origin in this calculation
    PUL%overshield_y = 0d0
    PUL%overshield_r = rs           ! twinax shield radius
    
    CALL PUL_LC_Laplace(PUL,cable%cable_name,cable%Y_fit_model_order,cable%Y_fit_freq_spec,domain) 
    
    cable%L_domain(domain)%mat(:,:)=PUL%L%mat(:,:)
    cable%C_domain(domain)%mat(:,:)=PUL%C%mat(:,:)
    
    cable%Z_domain(domain)%dim=dim
    ALLOCATE(cable%Z_domain(domain)%sfilter_mat(dim,dim))
    cable%Y_domain(domain)%dim=dim
    ALLOCATE(cable%Y_domain(domain)%sfilter_mat(dim,dim))
    
    cable%Z_domain(domain)%sfilter_mat(:,:)=PUL%Zfilter%sfilter_mat(:,:)
    cable%Y_domain(domain)%sfilter_mat(:,:)=PUL%Yfilter%sfilter_mat(:,:)
    
  else
  
! See C.R. Paul, 1st edition, equation 3.67a,b with cos(thetaij)=-1 ! Theory_Manual_Eqn 2.27, 2.28

    cable%L_domain(domain)%mat(1,1)=(mu0/(2d0*pi))*log( (rs**2-(s/2d0)**2)/(rs*rw) )
    cable%L_domain(domain)%mat(1,2)=(mu0/(2d0*pi))*log( (s/(2d0*rs)) * (rs**2+(s/2d0)**2)/(2d0*(s/2d0)**2) )
    cable%L_domain(domain)%mat(2,1)=cable%L_domain(domain)%mat(1,2)
    cable%L_domain(domain)%mat(2,2)=cable%L_domain(domain)%mat(1,1)
  
! calculate the capacitance matrix from the inverse of the inductance matrix *eps0*epsr*mu0
! Note this is for a homogeneous medium within the twinax internal domain

    ierr=0   ! set ierr=0 on input to matrix inverse to cause the program to stop if we have a singular matrix
    CALL  dinvert_Gauss_Jordan(cable%L_domain(domain)%mat,2,cable%C_domain(domain)%mat,2,ierr)
    cable%C_domain(domain)%mat(:,:)=eps0*epsr*mu0*cable%C_domain(domain)%mat(:,:)
  
    CALL Z_Y_from_L_C(cable%L_domain(domain),cable%C_domain(domain),cable%Z_domain(domain),cable%Y_domain(domain))
  
  end if 
  
  if (use_laplace) CALL deallocate_PUL_data(PUL)  ! deallocate the PUL data structure

! Set the domain decomposition matrices ! Theory_Manual_Eqn 6.7, 6.8

! The dimension of the domain transformation matrices is 4
  dim=4
  cable%MI%dim=dim
  ALLOCATE(cable%MI%mat(dim,dim))
  cable%MV%dim=dim
  ALLOCATE(cable%MV%mat(dim,dim))

  cable%MI%mat(1,1)=1d0
  cable%MI%mat(1,2)=0d0
  cable%MI%mat(1,3)=0d0
  cable%MI%mat(1,4)=0d0
  
  cable%MI%mat(2,1)=0d0
  cable%MI%mat(2,2)=1d0
  cable%MI%mat(2,3)=0d0
  cable%MI%mat(2,4)=0d0
  
  cable%MI%mat(3,1)=1d0
  cable%MI%mat(3,2)=1d0
  cable%MI%mat(3,3)=1d0
  cable%MI%mat(3,4)=0d0
  
  cable%MI%mat(4,1)=1d0
  cable%MI%mat(4,2)=1d0
  cable%MI%mat(4,3)=1d0
  cable%MI%mat(4,4)=1d0


  cable%MV%mat(1,1)=1d0
  cable%MV%mat(1,2)=0d0
  cable%MV%mat(1,3)=-1d0
  cable%MV%mat(1,4)=-0d0
  
  cable%MV%mat(2,1)=0d0
  cable%MV%mat(2,2)=1d0
  cable%MV%mat(2,3)=-1d0
  cable%MV%mat(2,4)=0d0
  
  cable%MV%mat(3,1)=0d0
  cable%MV%mat(3,2)=0d0
  cable%MV%mat(3,3)=1d0
  cable%MV%mat(3,4)=-1d0
  
  cable%MV%mat(4,1)=0d0
  cable%MV%mat(4,2)=0d0
  cable%MV%mat(4,3)=0d0
  cable%MV%mat(4,4)=1d0

! Set the local reference conductor numbering  
  ALLOCATE( cable%local_reference_conductor(3) )
  cable%local_reference_conductor(1)=3              ! inner wire, reference is the shield conductor
  cable%local_reference_conductor(2)=3              ! inner wire, reference is the shield conductor
  cable%local_reference_conductor(3)=0              ! external domain conductor, reference not known

! Set the local domain information: include a reference conductor in the count
  ALLOCATE( cable%local_domain_n_conductors(1:cable%tot_n_domains) )
  cable%local_domain_n_conductors(1)=3              ! internal domain 
  cable%local_domain_n_conductors(2)=2              ! external domain 
  
! Set the external domain conductor and dielectric information
   
  ALLOCATE( cable%external_model(cable%n_external_conductors) )
  CALL reset_external_conductor_model(cable%external_model(1))
  cable%external_model(1)%conductor_type=circle
  cable%external_model(1)%conductor_radius=rs
  cable%external_model(1)%dielectric_radius=rd2
  cable%external_model(1)%dielectric_epsr=epsr2
    
! set the conductor impedance model for the two inner conductors
  do i=1,2
    cable%conductor_impedance(i)%impedance_model_type=impedance_model_type_cylindrical_with_conductivity
    cable%conductor_impedance(i)%radius=rw
    cable%conductor_impedance(i)%conductivity=sigma_w
  end do
    
! set the impedance model for the shield conductor
    
  cable%conductor_impedance(3)%impedance_model_type=impedance_model_type_cylindrical_shield
  cable%conductor_impedance(3)%radius=rs
  cable%conductor_impedance(3)%thickness=t
  cable%conductor_impedance(3)%conductivity=sigma_s
  cable%conductor_impedance(3)%ZT_filter=ZT
  
  CALL deallocate_Sfilter(epsr1)
  CALL deallocate_Sfilter(epsr2)
  CALL deallocate_Sfilter(ZT)

END SUBROUTINE twinax_set_internal_domain_information
!
! NAME
!     twinax_plot
!
! AUTHORS
!     Chris Smartt
!
! DESCRIPTION
!     plot twinax cable 
!
! COMMENTS
!     the angle has an impact here...
!     The conductor geometry must be consistent with the documentation...
!
! HISTORY
!
!     started 5/9/2016 CJS based on twinax.F90
!
SUBROUTINE twinax_plot(cable,x_offset,y_offset,theta,xmin,xmax,ymin,ymax)

USE type_specifications
USE general_module

IMPLICIT NONE

! variables passed to subroutine

  type(cable_specification_type),intent(IN)    :: cable
  
  real(dp),intent(IN) :: x_offset,y_offset,theta
  real(dp),intent(INOUT) ::  xmin,xmax,ymin,ymax

! local variables

  real(dp) :: x,y,r,rd
  real(dp) :: s

! START

! plot inner conductor, 1
  r=cable%parameters(1)   ! inner conductor radius
  rd=cable%parameters(2)  ! inner dielectric radius
  s=cable%parameters(3)   ! inner conductor separation
  x=x_offset+(s/2d0)*sin(-theta)
  y=y_offset+(s/2d0)*cos(-theta)

  CALL write_circle(x,y,r,conductor_geometry_file_unit,xmin,xmax,ymin,ymax)

! plot inner dielectric 1
  CALL write_circle(x,y,rd,dielectric_geometry_file_unit,xmin,xmax,ymin,ymax)

! plot inner conductor, 2
  x=x_offset-(s/2d0)*sin(-theta)
  y=y_offset-(s/2d0)*cos(-theta)

  CALL write_circle(x,y,r,conductor_geometry_file_unit,xmin,xmax,ymin,ymax)
  
! plot inner dielectric 2
  CALL write_circle(x,y,rd,dielectric_geometry_file_unit,xmin,xmax,ymin,ymax)

! plot shield conductor
  r=cable%parameters(4)   ! shield radius
  x=x_offset
  y=y_offset

  CALL write_circle(x,y,r,conductor_geometry_file_unit,xmin,xmax,ymin,ymax)

! plot circular dielectric
  rd=cable%parameters(6)   ! outer dielectric radius
  x=x_offset
  y=y_offset

  CALL write_circle(x,y,rd,dielectric_geometry_file_unit,xmin,xmax,ymin,ymax)
  
  RETURN
  
END SUBROUTINE twinax_plot