#MOD_cable_lib_dir
./
Spacewire
13                # number of conductors
13                # number of parameters
    2.5000E-04   # parameter 1: inner conductor radius
    4.5000E-04   # parameter 2: inner dielectric radius
    1.0000E-03   # parameter 3: inner conductor separation
    2.0000E-03   # parameter 4: inner shield radius
    6.2500E-05   # parameter 5: inner shield thickness
    2.2000E-03   # parameter 6: inner shield jacket radius
    4.0000E-03   # parameter 7: shielded twisted pair radius
    8.0000E-03   # parameter 8: outer shield radius
    5.8594E-05   # parameter 9: outer shield thickness
    9.0000E-03   # parameter 10:outer dielectric radius
    5.0000E+07   # parameter 11: inner wire conductor conductivity
    5.0000E+07   # parameter 12: inner shield conductivity
    0.0000E+00   # parameter 13: outer shield conductivity
3                # number of frequency dependent parameters
# Inner dielectric relative permittivity model follows
   10000000.000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   2.2500000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
# Shielded twisted pair outer dielectric relative permittivity model follows
   10000000.000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   4.0000000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
# Outer dielectric relative permittivity model follows
   10000000.000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   2.2500000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
2                # number of frequency dependent transfer impedance models
# Shielded twisted pair transfer impedance model follows
   628318530.71795857        # w normalisation constant
           1   # a order, a coefficients follow below:
   2.5468494337902981E-002   1.0000000000000001E-009
           0   # b order, b coefficients follow below:
   1.0000000000000000     
# Outer shield transfer impedance model follows
   628318530.71795857        # w normalisation constant
           0   # a order, a coefficients follow below:
   0.0000000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
use_laplace