#MOD_cable_lib_dir
./
Spacewire
13                # number of conductors
13                # number of parameters
    0.16E-03   # parameter 1: inner conductor radius
    0.32E-03   # parameter 2: inner dielectric radius
    0.65E-3   # parameter 3: inner conductor separation
    0.70E-3   # parameter 4: inner shield radius
    0.0000E+00   # parameter 5: inner shield thickness
    0.70E-3   # parameter 6: inner shield jacket radius
    1.5E-3   # parameter 7: shielded twisted pair radius
    2.3E-03   # parameter 8: outer shield radius
    0.0000E+00   # parameter 9: outer shield thickness
    2.5E-03   # parameter 10:outer dielectric radius
    5.0000E+07   # parameter 11: inner wire conductor conductivity
    5.0000E+07   # parameter 12: inner shield conductivity
    5.0000E+07   # parameter 13: outer shield conductivity
3                # number of frequency dependent parameters
# Inner dielectric relative permittivity model follows
   10000000.000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   1.500000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
# Shielded twisted pair outer dielectric relative permittivity model follows
   10000000.000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   2.1000000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
# Outer dielectric relative permittivity model follows
   10000000.000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   2.100000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
2                # number of frequency dependent transfer impedance models
# Shielded twisted pair transfer impedance model follows
   1.0000000000000000        # w normalisation constant
           1   # a order, a coefficients follow below:
  0.10000000000000001        1.0000000000000001E-009
           0   # b order, b coefficients follow below:
   1.0000000000000000     
# Outer shield transfer impedance model follows
   1.0000000000000000        # w normalisation constant
           1   # a order, a coefficients follow below:
  0.10000000000000001        1.0000000000000001E-009
           0   # b order, b coefficients follow below:
   1.0000000000000000     
use_laplace
laplace_surface_mesh_constant
5