ToDo ------ Start Date : 2004-04-05 Last Update : 2016-10-23 Author : Mike Waters Email : mwaters517_AT_gmail_DOT_com ==================================================================================================== The following list contains "things to do" in the medium to long term for the gSpiceUI project. The items are grouped in the following categories : 1. Bugs (refer also to src/Version.hpp) 2. Enhancements to Existing Features 3. Improvements to the Code Base 4. Possible New Features Note : Bug reports are date stamped to highlight the age of the observation. ---------------------------------------------------------------------------------------------------- 1. Bugs (refer also to src/Version.hpp) : 2016-03-28 When the gSpiceUI GIU is set to it's minimum height and/or width some of the display controls minimum dimensions are exceeded. Might go alway if layout managers where implemented throughout gSpiceUI? 2015-04-17 GNU-Cap DC analysis results headers contain part of the results file name instead of the column labels. This happens when gnucap crashes (eg. it can't load library libgnucap.so). 2015-04-17 If GNU-Cap binary crashes (eg. it can't load library libgnucap.so) gSpiceUI crashes. 2015-04-15 Executing a GNU-Cap FO analysis on demos/bjt-amp-ce-2.sch crashes gSpiceUI. The bug is in PrcGnuCap::bFmtResultsFO( ). 2015-03-30 If at start-up a .ckt file can't be loaded but the associated .sch file exists then import it. This can happen if the .ckt file is deleted between envocations of gSpiceUI. The last accessed .ckt and .sch files are recorded in the config. file (.gspiceui.conf). If the reload button is pressed the schematic file is re-imported. 2015-02-22 Make sure all model files have the appropriate copyright notices. 2015-02-09 Preference to use Degrees or Radian doesn't work for NG-Spice. 2015-01-27 In CmdLinePcr the function CleanCfgFile( ) needs some work. The configuration file should be wipe clean and re-written using the existing configuration settings. 2012-02-10 If gnucap and/or ngspice aren't installed gSpiceUI just hangs. 2011-09-07 Source synchronization isn't quite working in both the NG-Spice and the GNU-Cap DC analyses. Source synchronization begins with a page changed event which is first intercepted by Nbk::OnPageChangd( ) which then allows NbkSimrBase::OnPageChangd( ) to actually handle the event. NbkSimrBase::OnPageChangd( ) gets a pointer to a PnlAnaBase object and changes the source name, however events can only propagate down from PnlDC to PnlAnaBase but not back the other way so PnlDC never knows about the event. PnlDC::OnSrcName( ) is where the sweep units type is set so this doesn't happen. 2011-08-26 Still producing "prcbase.log". 2011-05-26 Implement the bSaveSimCmds( ) method in the classes SimnGnuCap and SimnNgSpice. 2011-04-27 NG-Spice doesn't like probes where one of two nodes is ground, eg. ".PRINT TRAN V(Trigger,0)". It complains with the message : "Warning: can't parse '0': ignored" 2011-04-19 The way the wxProcess class is used is fault prone. wxProcess objects should be created dynamically when a process is to run and deleted soon after the process terminates. PrcBase inherits from wxProcess, it should contain a pointer to wxProcess object as an attribute. 2011-03-23 In the class PrcSimrBase the console spew logging mechanism is clumsy; PrcSimrBase::bSaveOutput( ) does almost the same thing as PrcBase::bLogOutput( ). Shouldn't have a results file should just use the PrcBase log file system. 2011-03-02 The GNU-Cap OP analysis the "Temp" column header is missing in the formatted results. Talk to the GNU-Cap developer/s. 2010-04-29 Resolve issues compiling the code under OSX. How? 2010-04-19 In FrmMain::Initialize( ) if the call to m_oFileTsks.Initialize( ) causes an error message to be displayed FrmMain is only partially initialized and it looks broken. Test Method : 1. delete the netlist file named in the config. file under "Files/NetList", 2. arrange it so that gnetlist can't be found by gspiceui. 2008-12-12 The function PrcBase::bLogOutput( ) ends early before all console output is collected. 2007-10-25 For NG-Spice simulations if R1 and C1 are connected in parallel and R1 is selected as a test component after a reload operation both R1 and C1 will be highlighted as test components. 2007-07-17 The transient analysis IC option isn't loaded correctly from the simulation file for NG-Spice. ---------------------------------------------------------------------------------------------------- 2. Enhancements to Existing Features : * Allow .PARAM and other SPICE commands thro. to the simulation file. * The reload button / function could be rendered superfluous before running a simulation the schematic file modification timestamp was compared to the circuit file modification timestamp. If the schematic file is newer then reload it automatically. * After a simulation has completed add the run time in brackets to the status message. * Get NG-Spice to display phase results using radians or degrees. Refer to section 10.5 Variables -> "units". The SET command doesn't seem to work in batch mode. * Complete the implementation of layout managers in class PnlAnaBase and it's decendants. * Modify the spin control so that zero appears more often when using the spin buttons ie. decrement / increment through zero before changing the units. * When a gschem process is exited and the schematic file has changed automatically do a reload and maybe re-create the simulation file. * In the simulation file, place simulation commands ahead of models and sub-circuits. * After a simulation has run, if the data viewer utility is open tell it to reload the results file. * Could an existing opamp symbol be used in schematics instead of my symbol in the file opamp-3.sym? * Maybe all Open dialogs should accommodate upper case file extensions as well as lower case. * For AC analysis if results magnitudes are in dB chosen how about displaying Signal Source magnitude in dB. * If user envokes either of the schematic editor or data viewer utilities and it is already running bring it to the foreground instead of displaying an error message dialog. * Use standard component values in PnlValue controls displaying R, L or C. * Automatically add ".MODEL" statements to netlist file if they are missing. * Remove the discontinuity at 360 degrees from the phase results. * Remember the position of Gaw or gWave and place it there when it's envoked. * PnlValue & PnlTxtSpn classes should object if non-numeric chars are entered. * Allow the PnlTxtSpn class to be changed using the up and down arrow keys. * When a netlist created by gSpiceUI is loaded into the NetList text control load it into the Simulation text control as well. If gSpiceUI created the netlist it can be simulated. * The NG-Spice Transient analysis cold initial conditions doesn't work. Will need to implement the IC command to zero all nodes voltages. * In PnlValue class shouldn't be allowed to change value or units if a component name hasn't been chosen. * If gSpiceUI is exited with gschem open, any unsaved changes in the schematic file are lost. * In NG-Spice the variable "numdgt" could be useful for setting displayed precision. Refer to section 10.5 Variables. * While performing a simulation if the gSpiceUI GUI is corrupted it isn't re-drawn until after the simulation is complete. Need wxYield( ) statements in appropriate places to allow the GUI to be updated. * Make analysis panel back-ground a bit darker than control panels. ---------------------------------------------------------------------------------------------------- 3. Improvements to the Code Base : * In the preferences dialogue add an option indicating what the PnlValue class should do when it's next step could be zero, ie. change sign (eg. (+)ve to (-)ve) or change units (eg. V to mV). * In the preferences dialogue add an option for line wrapping of the console buffers. * Add cloc (Count Lines Of Code) to base Makefile. * In FrmMain layout investigate using one vertical and one horizontal box sizer instead of the more complex grid bag sizer. * In the PnlAnaBase class and it's descendants haven't used a layout manager. Have hard coded control sizes and positions. This is asking for trouble. * Should export as much as possible of FrmMain to App_gSpiceUI. FrmMain should layout the main frame and handle interrupts. App_gSpiceUI should manage all the processing tasks. Could some of the interrupts be hand-balled to App_gSpiceUI? * Abbreviate names containing NgSpice & GnuCap to NgSp & GCap respectively. * Investigate replacing parts of PnlTxtSpn with wxSpinCtrlDouble. Create a test app. perhaps. * Create a class for circuit description models. * Create a class for circuit description sub-circuits. * There are 3 types of source which may be used : a sweep source a signal source and an independant source. Ensure that this distinction is clearly made in the code and the GUI. * PnlValue class can be set to eg. 0.10 psec by the user but not programmatically, ie. using bSetValue( ). * In FrmMain the run simulation mechanism is evil. It needs a major overhaul. The Stop button doesn't work because the app. stays in the OnSimRun( ) event handler while the simulation runs so no other events are handled until this is exited. ---------------------------------------------------------------------------------------------------- 4. Possible New Features : * Add a mechanism to create a new schematic or netlist file so gSpiceUI can be used as an interface to gschem in all situations. Don't ever need to start gschem separately if preferred. * Provide support for SPICE OPUS. * Fully support non-English locales using gettext( ), etc. * Add help items for the documentation for NG-Spice and GNU-Cap. * Add application paths to the Preferences dialogue : - NG-Spice & GNU-Cap binaries (and documentation for same) - gschem & gnetlist - Gwave & Gaw - calculator utility Show which utilities have or haven't been found automatically. * Do 'include' directives need to be expanded by gnetlist? Simulation engine could be left to do this. * Add a tool bar button for the calculator utility. * Implement Fourier analysis panel for NG-Spice. * When a simulation ends prematurely because of problems encountered by the simulation engine, notify the user that this has happened. Need a mechanism to determining if the end of the sweep range was actually been reached. * Add a mechanism for envoking a calculator which the user may nominate in the preferences dialog (the best one I've found so far is galculator). * Develop a mechanism by which the user may set the initial conditions for the transient analysis. * Investigate using the simulation engine PLOT command to display results. ====================================================================================================