!
! This file is part of SACAMOS, State of the Art CAble MOdels in Spice. 
! It was developed by the University of Nottingham and the Netherlands Aerospace 
! Centre (NLR) for ESA under contract number 4000112765/14/NL/HK.
! 
! Copyright (C) 2016-2017 University of Nottingham
! 
! SACAMOS is free software: you can redistribute it and/or modify it under the 
! terms of the GNU General Public License as published by the Free Software 
! Foundation, either version 3 of the License, or (at your option) any later 
! version.
! 
! SACAMOS is distributed in the hope that it will be useful, but 
! WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 
! or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
! for more details.
! 
! A copy of the GNU General Public License version 3 can be found in the 
! file GNU_GPL_v3 in the root or at <http://www.gnu.org/licenses/>.
! 
! SACAMOS uses the EISPACK library (in /SRC/EISPACK). EISPACK is subject to 
! the GNU Lesser General Public License. A copy of the GNU Lesser General Public 
! License version can be found in the file GNU_LGPL in the root of EISPACK 
! (/SRC/EISPACK ) or at <http://www.gnu.org/licenses/>.
! 
! The University of Nottingham can be contacted at: ggiemr@nottingham.ac.uk
!
! File Contents:
! SUBROUTINE cylindrical_set_parameters
! SUBROUTINE cylindrical_set_internal_domain_information
! SUBROUTINE cylindrical_plot
!
! NAME
!     cylindrical_set_parameters
!
! AUTHORS
!     Chris Smartt
!
! DESCRIPTION
!     Set the overall parameters for a cylindrical cable
!
! COMMENTS
!      
!
! HISTORY
!
!     started 12/4/2016 CJS 
!     16/11/2017 CJS Include network synthesis process to replace s-domain transfer functions
!
!
SUBROUTINE cylindrical_set_parameters(cable)

USE type_specifications

IMPLICIT NONE

! variables passed to subroutine

  type(cable_specification_type),intent(INOUT)    :: cable

! local variables

! START

  cable%cable_type=cable_geometry_type_cylindrical
  cable%tot_n_conductors=1
  cable%tot_n_domains=1
  cable%n_external_conductors=1
  cable%n_internal_conductors=0
  cable%n_internal_domains=0
  cable%n_parameters=3
  cable%n_dielectric_filters=1
  cable%n_transfer_impedance_models=0

END SUBROUTINE cylindrical_set_parameters
!
! NAME
!     cylindrical_set_internal_domain_information
!
! AUTHORS
!     Chris Smartt
!
! DESCRIPTION
!     Set the overall parameters for a cylindrical_with_dielectric cable
!
! COMMENTS
!     Set the dimension of the domain transformation matrices to include an external reference conductor for the cable 
!      
!
! HISTORY
!
!     started 13/4/2016 CJS 
!     Include additional data for Laplace solver 12/7/2016
!     8/5/2017         CJS: Include references to Theory_Manual
!
SUBROUTINE cylindrical_set_internal_domain_information(cable)

USE type_specifications
USE general_module
USE constants

IMPLICIT NONE

! variables passed to subroutine

  type(cable_specification_type),intent(INOUT)    :: cable

! local variables

  integer :: dim
  
! variables for cable parameter checks 
  logical :: cable_spec_error
  real(dp) :: r
  real(dp) :: rd
  real(dp) :: sigma
  type(Sfilter) :: epsr
  
  character(LEN=error_message_length) :: message 

! START

! Check the cable parameters

  r=cable%parameters(1) 
  rd=cable%parameters(2) 
  sigma=cable%parameters(3)
  epsr=cable%dielectric_filter(1)
  
  cable_spec_error=.FALSE.    ! assume no errors initially
  message=''
  CALL cylindrical_with_dielectric_check(r,rd,cable_spec_error,cable%cable_name,message)
  CALL dielectric_check(epsr,cable_spec_error,cable%cable_name,message)
  CALL conductivity_check(sigma,cable_spec_error,cable%cable_name,message)
   
  if (cable_spec_error) then       
    run_status='ERROR in cable_model_builder, error on parameters for cable:'//trim(cable%cable_name)//'. '//trim(message)
    CALL write_program_status()
    STOP 1
  end if
   
! Set the domain decomposition matrices ! Theory_Manual_Eqn 6.1, 6.2

! The dimension of the domain transformation matrices is 2

  dim=2
  cable%MI%dim=dim
  ALLOCATE(cable%MI%mat(dim,dim))
  cable%MV%dim=dim
  ALLOCATE(cable%MV%mat(dim,dim))

  cable%MI%mat(1,1)=1d0
  cable%MI%mat(1,2)=0d0
  cable%MI%mat(2,1)=1d0
  cable%MI%mat(2,2)=1d0

  cable%MV%mat(1,1)=1d0
  cable%MV%mat(1,2)=-1d0
  cable%MV%mat(2,1)=0d0
  cable%MV%mat(2,2)=1d0

! Set the local reference conductor numbering  
  ALLOCATE( cable%local_reference_conductor(1) )
  cable%local_reference_conductor(1)=0              ! external domain conductor, reference not known

! Set the local domain information: include a reference conductor in the count
  ALLOCATE( cable%local_domain_n_conductors(1:cable%tot_n_domains) )
  cable%local_domain_n_conductors(1)=2              ! external domain 
  
! Set the external domain conductor and dielectric information
   
  ALLOCATE( cable%external_model(cable%n_external_conductors) )
  CALL reset_external_conductor_model(cable%external_model(1))
  cable%external_model(1)%conductor_type=circle
  cable%external_model(1)%conductor_radius=r
  cable%external_model(1)%dielectric_radius=rd 
  cable%external_model(1)%dielectric_epsr=epsr
 
! set the conductor impedance model for the conductor
  cable%conductor_impedance(1)%impedance_model_type=impedance_model_type_cylindrical_with_conductivity
  cable%conductor_impedance(1)%radius=r
  cable%conductor_impedance(1)%conductivity=sigma
  
  CALL deallocate_Sfilter(epsr)
  
  ALLOCATE( cable%conductor_label(1:cable%tot_n_conductors) )
  cable%conductor_label(1)='Cable name: '//trim(cable%cable_name)//   &
                           '. type: '//trim(cable%cable_type_string)//'. conductor 1 : wire'

END SUBROUTINE cylindrical_set_internal_domain_information
!
! NAME
!     cylindrical_plot
!
! AUTHORS
!     Chris Smartt
!
! DESCRIPTION
!     plot cylindrical cable with dielectric
!
! COMMENTS
!      
!
! HISTORY
!
!     started 14/4/2016 CJS 
!
!
SUBROUTINE cylindrical_plot(cable,x_offset,y_offset,theta,xmin,xmax,ymin,ymax)

USE type_specifications
USE general_module

IMPLICIT NONE

! variables passed to subroutine

  type(cable_specification_type),intent(IN)    :: cable
  
  real(dp),intent(IN) :: x_offset,y_offset,theta
  real(dp),intent(INOUT) ::  xmin,xmax,ymin,ymax

! local variables

  real(dp) :: x,y,r

! START

! plot circular conductor
  r=cable%parameters(1)   ! wire radius
  x=x_offset
  y=y_offset

  CALL write_circle(x,y,r,conductor_geometry_file_unit,xmin,xmax,ymin,ymax)

! plot circular dielectric
  r=cable%parameters(2)   ! dielectric radius
  x=x_offset
  y=y_offset

  CALL write_circle(x,y,r,dielectric_geometry_file_unit,xmin,xmax,ymin,ymax)
  
  RETURN
  
END SUBROUTINE cylindrical_plot