#MOD_cable_lib_dir
./
Shielded_twisted_pair
3                # number of conductors
8                # number of parameters
    5.0000E-04   # parameter 1: inner conductor radius
    7.5000E-04   # parameter 2: inner dielectric radius
    2.0000E-03   # parameter 3: inner conductor separation
    5.0000E-03   # parameter 4: shield radius
    0.0000E+00   # parameter 5: shield thickness
    6.0000E-03   # parameter 6: outer dielectric radius
    5E7          # parameter 7: inner conductor conductivity
    0.0000E+00   # parameter 8: shield conductivity
2                # number of frequency dependent parameters
# Dielectric relative permittivity model follows
   1000000000.0000000        # w normalisation constant
           1   # a order, a coefficients follow below:
   4.0000000000000000        2.0000000000000000     
           1   # b order, b coefficients follow below:
   1.0000000000000000        1.0000000000000000     
# Outer dielectric relative permittivity model follows
   1.0000000000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   1.0000000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
1                # number of frequency dependent transfer impedance models
# Transfer impedance model follows
   1.0000000000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   0.0000000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
-10    ! order for filter fit solution
lin   # frequency range type for filter fitting type (lin or dB)
1e3 1e9 10 # fmin fmax number_of_frequencies for filter fitting
use_laplace