#MOD_cable_lib_dir
.
flex_cable
3		# number of conductors
22		# number of parameters
3.5e-3          # parameter 1: dielectric width (x dimension)
0.55e-3  	# parameter 2: dielectric height (y dimension)
3               # parameter 3: number of rows of conductors
0.0e-3  	# parameter 4: row 1 centre offset x
0.0e-3  	# parameter 5: row 1 centre offset y
0.25e-3         # parameter 6: row 1 conductor width (x dimension)
0.01e-3         # parameter 7: row 1 conductor height (y dimension)
0.25e-3         # parameter 8: row 1 conductor separation
1               # parameter 9: row 1 number of conductors
0.0e-3  	# parameter 10: row 2 centre offset x
0.25e-3  	# parameter 11: row 2 centre offset y
3.00e-3         # parameter 12: row 2 conductor width (x dimension)
0.03e-3         # parameter 13: row 2 conductor height (y dimension)
0.25e-3         # parameter 14: row 2 conductor separation
1               # parameter 15: row 2 number of conductors
0.0e-3  	# parameter 16: row 3 centre offset x
-0.25e-3 	# parameter 17: row 3 centre offset y
3.00e-3         # parameter 18: row 3 conductor width (x dimension)
0.03e-3         # parameter 19: row 3 conductor height (y dimension)
0.25e-3         # parameter 20: row 3 conductor separation
1               # parameter 21: row 3 number of conductors
0.0  	        # parameter 22: conductivity
1		# number of frequency dependent parameters
# dielectric relative permittivity model follows
   1E9        # w normalisation constant
           0   # a order, a coefficients follow below:
  3.4         
           0   # b order, b coefficients follow below:
  1.0