5.0000000000000001E-003  # Parameter Shield radius (m)
   6.2500000000000015E-005  # Parameter Equivalent shield thickness (m)
   50000000.000000000       # Parameter Shield conductivity (S/m)
  
 # Transfer impedance model
  
   628318530.71795857        # w normalisation constant
           6   # a order, a coefficients follow below:
   1.0187397735161184E-002   1.3031323228143827        31.281445689299467        193.25056507446328        480.55776779631879        536.65064702469192        260.62745886049362     
           5   # b order, b coefficients follow below:
   1.0000000000000000        23.599449123864325        145.90222072648217        362.78999275303266        405.14016972906620        196.75864271144215     
  
 # Conductor surface impedance model
  
   628318530.71795857        # w normalisation constant
           4   # a order, a coefficients follow below:
   1.0212715803263406E-002  0.71195958009395321        5.3506073569944022        8.7195413994947621        2.7707620178335786     
           4   # b order, b coefficients follow below:
   1.0000000000000000        18.987055251519244        64.911367837365901        49.386334031367127        4.7789439058672514     
  
 # Shield parameters used in the shield model calculation
 braid circummference, cb=   3.1415926535897934E-002
 C=          20  Number of carriers
 N=           4  Number of conductors in each carrier
 W=   1.0000000000000000E-003  Width of each carrier
 W=   1.9999999999999996E-003  Width of each carrier in circumferential direction
 cb/(C/2)=   3.1415926535897933E-003  circumferential dimension for each carrier (note overlap)
 P=   551.32889542179180     
 v=   11026.577908435836        Number of holes per unit length in braid
 F=  0.63661977236758116        Fill factor
 K=  0.86795481016581144        Optical coverage
 l=   6.5909882585496688E-004   hole length
 w=   1.1415926535897939E-003   hole width
 S=   5.9095115345494159E-007   hole area
 Th=   1.5998237760616723        hole attenuation factor
 Ck=  0.17669058761314710        hole inductance factor
 Ro   1.0185916357881299E-002   braid d.c. resistance
 T    6.2500000000000015E-005   braid equivalent thickness
 mean braid diameter, Dm=   1.0500000000000001E-002
 Width between holes,  b=   5.7079632679489707E-004
 Average height for braid inductance,  hh=   2.5000000000000001E-004
 M12= (  4.6280412535184822E-010,  0.0000000000000000     )  Hole inductance
 Mb = (  1.6453700219947661E-009,  0.0000000000000000     )  Braid inductance
 Ms= (  0.0000000000000000     ,  0.0000000000000000     )  Skin inductance
 M= (  2.1081741473466141E-009,  0.0000000000000000     )  Total transfer inductance