#MOD_cable_lib_dir
./
Spacewire
13                # number of conductors
13                # number of parameters
    2.0000E-04   # parameter 1: inner conductor radius
    2.5000E-04   # parameter 2: inner dielectric radius
    8.0000E-04   # parameter 3: inner conductor separation
    1.5000E-03   # parameter 4: inner shield radius
    0.0000E+00   # parameter 5: inner shield thickness
    2.0000E-03   # parameter 6: inner shield jacket radius
    3.0000E-03   # parameter 7: shielded twisted pair radius
    5.5000E-03   # parameter 8: outer shield radius
    0.0000E+00   # parameter 9: outer shield thickness
    6.5000E-03   # parameter 10:outer dielectric radius
    0.0000E+00   # parameter 11: inner wire conductor conductivity
    0.0000E+00   # parameter 12: inner shield conductivity
    0.0000E+00   # parameter 13: outer shield conductivity
3                # number of frequency dependent parameters
# Inner dielectric relative permittivity model follows
   1.0000000000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   2.2500000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
# Shielded twisted pair outer dielectric relative permittivity model follows
   1.0000000000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   2.2500000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
# Outer dielectric relative permittivity model follows
   1.0000000000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   2.5000000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
2                # number of frequency dependent transfer impedance models
# Shielded twisted pair transfer impedance model follows
   1.0000000000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   0.0000000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
# Outer shield transfer impedance model follows
   1.0000000000000000        # w normalisation constant
           0   # a order, a coefficients follow below:
   0.0000000000000000     
           0   # b order, b coefficients follow below:
   1.0000000000000000     
no_laplace