Blame view

SRC/CABLE_MODULES/flex_cable.F90 8.82 KB
886c558b   Steve Greedy   SACAMOS Public Re...
1
!
fe64b32b   Chris Smartt   Update file heade...
2
! This file is part of SACAMOS, State of the Art CAble MOdels for Spice. 
886c558b   Steve Greedy   SACAMOS Public Re...
3
4
5
! It was developed by the University of Nottingham and the Netherlands Aerospace 
! Centre (NLR) for ESA under contract number 4000112765/14/NL/HK.
! 
fe64b32b   Chris Smartt   Update file heade...
6
! Copyright (C) 2016-2018 University of Nottingham
886c558b   Steve Greedy   SACAMOS Public Re...
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
! 
! SACAMOS is free software: you can redistribute it and/or modify it under the 
! terms of the GNU General Public License as published by the Free Software 
! Foundation, either version 3 of the License, or (at your option) any later 
! version.
! 
! SACAMOS is distributed in the hope that it will be useful, but 
! WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 
! or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
! for more details.
! 
! A copy of the GNU General Public License version 3 can be found in the 
! file GNU_GPL_v3 in the root or at <http://www.gnu.org/licenses/>.
! 
! SACAMOS uses the EISPACK library (in /SRC/EISPACK). EISPACK is subject to 
! the GNU Lesser General Public License. A copy of the GNU Lesser General Public 
! License version can be found in the file GNU_LGPL in the root of EISPACK 
! (/SRC/EISPACK ) or at <http://www.gnu.org/licenses/>.
! 
! The University of Nottingham can be contacted at: ggiemr@nottingham.ac.uk
!
fe64b32b   Chris Smartt   Update file heade...
28
!
886c558b   Steve Greedy   SACAMOS Public Re...
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
! File Contents:
! SUBROUTINE flex_cable_set_parameters
! SUBROUTINE flex_cable_set_internal_domain_information
! SUBROUTINE flex_cable_plot
!
! NAME
!     flex_cable_set_parameters
!
! AUTHORS
!     Chris Smartt
!
! DESCRIPTION
!     Set the overall parameters for a flex_cable cable
!
! COMMENTS
!      
!
! HISTORY
!
!     started 26/9/2016 CJS 
189467e4   Steve Greedy   First Public Release
49
!     16/11/2017 CJS Include network synthesis process to replace s-domain transfer functions
886c558b   Steve Greedy   SACAMOS Public Re...
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
!
!
SUBROUTINE flex_cable_set_parameters(cable)

USE type_specifications

IMPLICIT NONE

! variables passed to subroutine

  type(cable_specification_type),intent(INOUT)    :: cable

! local variables

! START

  cable%cable_type=cable_geometry_type_flex_cable
  cable%tot_n_conductors=0        ! this is set in the cable specification file
  cable%tot_n_domains=1
  cable%n_external_conductors=0   ! this is set in the cable specification file
  cable%n_internal_conductors=0  
  cable%n_internal_domains=0
  cable%n_parameters=6
  cable%n_dielectric_filters=1
  cable%n_transfer_impedance_models=0
  
END SUBROUTINE flex_cable_set_parameters
!
! NAME
!     flex_cable_set_internal_domain_information
!
! AUTHORS
!     Chris Smartt
!
! DESCRIPTION
!     Set the overall parameters for a flex_cable cable
!
! COMMENTS
!     Set the dimension of the domain transformation matrices to include an external reference conductor for the cable 
!      
!
! HISTORY
!
!     started 13/4/2016 CJS 
!     8/5/2017         CJS: Include references to Theory_Manual
!
!
SUBROUTINE flex_cable_set_internal_domain_information(cable)

USE type_specifications
USE general_module
USE constants

IMPLICIT NONE

! variables passed to subroutine

  type(cable_specification_type),intent(INOUT)    :: cable

! local variables

  integer :: nc
  integer :: dim
  integer :: i,row,col
  
  real(dp) :: full_width,flex_cable_xmin
  real(dp) :: wd,hd,x0
  
! variables for cable parameter checks 
  logical :: cable_spec_error
  real(dp) :: w
  real(dp) :: h
  real(dp) :: s
  real(dp) :: dox
  real(dp) :: doy
  real(dp) :: sigma
  
  type(Sfilter) :: epsr
  
  character(LEN=error_message_length) :: message 
189467e4   Steve Greedy   First Public Release
130
131
  
  character(LEN=2) :: conductor_string
886c558b   Steve Greedy   SACAMOS Public Re...
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247

! START

! Check the cable parameters
  nc=cable%tot_n_conductors 

  w=cable%parameters(1)   ! wire width
  h=cable%parameters(2)   ! wire height
  s=cable%parameters(3)   ! wire separation
  dox=cable%parameters(4)   ! dielectric offset in x
  doy=cable%parameters(5)   ! dielectric offset in y
  sigma=cable%parameters(6)   ! conductivity
  
  epsr=cable%dielectric_filter(1)
  
  cable_spec_error=.FALSE.    ! assume no errors initially
  message=''
  CALL flex_cable_check(nc,w,h,s,dox,doy,cable_spec_error,cable%cable_name,message)
  CALL dielectric_check(epsr,cable_spec_error,cable%cable_name,message)
   
  if (cable_spec_error) then       
    run_status='ERROR in cable_model_builder, error on parameters for cable:'//trim(cable%cable_name)//'. '//trim(message)
    CALL write_program_status()
    STOP 1
  end if

! set the information related ot the number of conductors

  cable%n_external_conductors=nc
    
! Set the domain decomposition matrices ! Theory_Manual_Eqn 6.17, 6.18

! The dimension of the domain transformation matrices is the number of conductors+1
  dim=nc+1

  cable%MI%dim=dim
  ALLOCATE(cable%MI%mat(dim,dim))
  cable%MI%mat(:,:)=0d0
  
  cable%MV%dim=dim
  ALLOCATE(cable%MV%mat(dim,dim))
  cable%MV%mat(:,:)=0d0

  do i=1,nc
    row=i
    col=row
    cable%MI%mat(row,col)=1d0
  end do
  do i=1,dim
    row=dim
    col=i
    cable%MI%mat(row,col)=1d0
  end do

  do i=1,nc
    row=i
    col=row
    cable%MV%mat(row,col)=1d0
    cable%MV%mat(row,dim)=-1d0
  end do
  cable%MV%mat(dim,dim)=1d0
  
! Set the local reference conductor numbering  
  ALLOCATE( cable%local_reference_conductor(nc) )
  cable%local_reference_conductor(1:nc)=0              ! external domain conductor, reference not known

! Set the local domain information: include a reference conductor in the count
  ALLOCATE( cable%local_domain_n_conductors(1:cable%tot_n_domains) )
  cable%local_domain_n_conductors(1)=nc+1     ! external domain 
   
! set the conductor impedance model for the conductors

  do i=1,cable%n_external_conductors

    cable%conductor_impedance(i)%impedance_model_type=impedance_model_type_rectangular_with_conductivity
    cable%conductor_impedance(i)%width=cable%parameters(1)
    cable%conductor_impedance(i)%height=cable%parameters(2)
    cable%conductor_impedance(i)%conductivity=cable%parameters(6)

  end do
 
! Set the external domain conductor and dielectric information

  full_width=w*cable%tot_n_conductors+s*(cable%tot_n_conductors-1)
  flex_cable_xmin=-full_width/2d0
  
  ALLOCATE( cable%external_model(cable%n_external_conductors) )
  do i=1,cable%n_external_conductors
    CALL reset_external_conductor_model(cable%external_model(i))
    cable%external_model(i)%conductor_type=rectangle
    cable%external_model(i)%conductor_width=w
    cable%external_model(i)%conductor_width2=w
    cable%external_model(i)%conductor_height=h

! work out the offset of the ith conductor
    x0=flex_cable_xmin+(w+s)*(i-1)+w/2d0
    cable%external_model(i)%conductor_ox=x0
    
  end do
  
! add a dielectric region to the first conductor which encloses the whole cable

! write the dielectric which is offset from the conductors    
  
  wd=full_width+dox*2d0
  hd=h+2d0*doy
  
! The dielectric is centred at the cable centre 
  x0=0d0
  
  cable%external_model(1)%dielectric_width=wd
  cable%external_model(1)%dielectric_height=hd
  cable%external_model(1)%dielectric_ox=x0
  cable%external_model(1)%dielectric_epsr=epsr

  CALL deallocate_Sfilter(epsr)
189467e4   Steve Greedy   First Public Release
248
249
250
251
252
  
  ALLOCATE( cable%conductor_label(1:cable%tot_n_conductors) )
  do i=1,cable%tot_n_conductors
    write(conductor_string,'(I2)')i
    cable%conductor_label(i)='Cable name: '//trim(cable%cable_name)//   &
44c11f06   Chris Smartt   Include software ...
253
    '. type: '//trim(cable%cable_type_string)//'. conductor '//conductor_string//' : original_flex_cable conductor'
189467e4   Steve Greedy   First Public Release
254
  end do
886c558b   Steve Greedy   SACAMOS Public Re...
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
    
END SUBROUTINE flex_cable_set_internal_domain_information
!
! NAME
!     flex_cable_plot
!
! AUTHORS
!     Chris Smartt
!
! DESCRIPTION
!     plot flex_cable cable
!
! COMMENTS
!      
!
! HISTORY
!
!     started 23/9/2016 CJS 
!
!
SUBROUTINE flex_cable_plot(cable,x_offset,y_offset,theta,xmin,xmax,ymin,ymax)

USE type_specifications
USE general_module

IMPLICIT NONE

! variables passed to subroutine

  type(cable_specification_type),intent(IN)    :: cable
  
  real(dp),intent(IN) :: x_offset,y_offset,theta
  real(dp),intent(INOUT) ::  xmin,xmax,ymin,ymax
  
! local variables

  integer nc

  real(dp) :: full_width,flex_cable_xmin
  real(dp) :: x0,y0,x,y,w,h,s,wd,hd
  
  integer i

! START

! plot flex_cable conductor

  nc=cable%tot_n_conductors

  w=cable%parameters(1)   ! wire width
  h=cable%parameters(2)   ! wire height
  s=cable%parameters(3)   ! wire separation

  full_width=w*nc+s*(nc-1)
  flex_cable_xmin=-full_width/2d0

! loop over the individual conductors
  do i=1,nc

! work out the centre of this conductor before rotation
    x0=flex_cable_xmin+(w+s)*(i-1)+w/2d0
    y0=0.0
    
! work out the centre of this conductor when the flex cable is rotated and offset
    x=x_offset+x0*cos(theta)-y0*sin(theta)
    y=y_offset+x0*sin(theta)+y0*cos(theta)
    
! write the conductor    
    CALL write_rectangle(x,y,w,h,theta,conductor_geometry_file_unit,xmin,xmax,ymin,ymax)
   
  end do ! next conductor 

! write the dielectric which is offset from the conductors    
  
  wd=cable%external_model(1)%dielectric_width
  hd=cable%external_model(1)%dielectric_height
  CALL write_rectangle(x_offset,y_offset,wd,hd,theta,dielectric_geometry_file_unit,xmin,xmax,ymin,ymax)
   
  RETURN
  
END SUBROUTINE flex_cable_plot