Blame view

SRC/PUL_PARAMETER_CALCULATION/PUL_LC_Laplace.F90 52.9 KB
886c558b   Steve Greedy   SACAMOS Public Re...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
!
! This file is part of SACAMOS, State of the Art CAble MOdels in Spice. 
! It was developed by the University of Nottingham and the Netherlands Aerospace 
! Centre (NLR) for ESA under contract number 4000112765/14/NL/HK.
! 
! Copyright (C) 2016-2017 University of Nottingham
! 
! SACAMOS is free software: you can redistribute it and/or modify it under the 
! terms of the GNU General Public License as published by the Free Software 
! Foundation, either version 3 of the License, or (at your option) any later 
! version.
! 
! SACAMOS is distributed in the hope that it will be useful, but 
! WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 
! or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
! for more details.
! 
! A copy of the GNU General Public License version 3 can be found in the 
! file GNU_GPL_v3 in the root or at <http://www.gnu.org/licenses/>.
! 
! SACAMOS uses the EISPACK library (in /SRC/EISPACK). EISPACK is subject to 
! the GNU Lesser General Public License. A copy of the GNU Lesser General Public 
! License version can be found in the file GNU_LGPL in the root of EISPACK 
! (/SRC/EISPACK ) or at <http://www.gnu.org/licenses/>.
! 
! The University of Nottingham can be contacted at: ggiemr@nottingham.ac.uk
!
! File Contents:
! 
!     SUBROUTINE PUL_LC_Laplace
!
! NAME
!     SUBROUTINE PUL_LC_Laplace
!
! DESCRIPTION
!     Wrapping subroutine to control the calculation of PUL_parameters by the Finite Element method
!     which is implemented in Laplace.F90
!
!     The finite element mesh is greated by the open source software gmsh: see http://gmsh.info/
!
!     The process is divided into the following stages:
! STAGE 1: work out the configuration for the calculation i.e. is there a ground plane, is the outer boundary free space or a conductor (overshield)
! STAGE 2: Work out the numbers of conductors, points, lines, line loops and surfaces in the cross section geometry
! STAGE 3: Create the input file for the mesh generator, gmsh.
! STAGE 4: Call the mesh generator, gmsh
! STAGE 5: Call Laplace to calculate the L,C and G matrices, using the mesh that we have just generated
!     
! COMMENTS
!    This subroutine is never called in the case of a homogeneous frequency dependent dielectric region
!    If this were to change then the logic of how Laplace is called in stage 5 will have to change to 
!    take this into account.
!
! HISTORY
!    started 5/7/2016 CJS. 
!    add dielectric regions 13/7/2016 CJS. 
!    Consolidated ground_plane, overhsield and open_boundary subroutines into a single subroutine here 13/12/2016 CJS.
189467e4   Steve Greedy   First Public Release
57
58
59
!    14/10/2017 CJS make the filter fitting minimum aorder=1, border=0 and
!                   ensure that border=aorder-1 to make the choice of model order more sensible
!     16/11/2017 CJS Include network synthesis process to replace s-domain transfer functions
44c11f06   Chris Smartt   Include software ...
60
!    4/3/2018 CJS Start to include the infinite ground plane option
189467e4   Steve Greedy   First Public Release
61
!
44c11f06   Chris Smartt   Include software ...
62
!    16/3/2018 CJS add offset to x and y for shapes. Relates to ML_flex cables
886c558b   Steve Greedy   SACAMOS Public Re...
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
!
SUBROUTINE PUL_LC_Laplace(PUL,name,fit_order,freq_spec,domain)
!
USE type_specifications
USE constants
USE general_module
USE maths
USE filter_module
USE filter_module
USE Sfilter_fit_module
USE frequency_spec
!
IMPLICIT NONE

! variables passed to subroutine

  type(PUL_type), intent(INOUT)            :: PUL        ! per-unit-length parameter calculation structure
  character(LEN=line_length),intent(IN)    :: name       ! string used as the base for filenames 
  integer, intent(IN)                      :: fit_order  ! filter fit_order for frequency dependent dielectrics
  type(frequency_specification),intent(IN) :: freq_spec  ! filter frequency range specification for frequency dependent dielectrics
  integer, intent(IN)                      :: domain     ! domain number used to label the mesh files
  
! parameters 
  integer,parameter :: inside =1 
  integer,parameter :: outside=2
 
! local variables

! flags to indicate the configuration
  logical :: ground_plane
44c11f06   Chris Smartt   Include software ...
93
94
  logical :: finite_ground_plane
  logical :: infinite_ground_plane
886c558b   Steve Greedy   SACAMOS Public Re...
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
  logical :: overshield
  logical :: open_boundary

! counters and loop limits which depend on the configuration required  
  integer :: end_conductor_loop
  integer :: end_conductor_to_dielectric_loop
  integer :: tot_n_boundaries_without_dielectric
  integer :: first_conductor_shape
 
! local variables

  character(LEN=filename_length) :: geom_filename            ! filename for the geometry - i.e. the input file for gmsh
  character(LEN=filename_length) :: mesh_filename            ! filename for the mesh     - i.e. the output file from gmsh

! temposrary strings used to construct filenames
  character(LEN=filename_length) :: string1,string2
  character(LEN=filename_length) :: temp_string
  character(LEN=filename_length) :: mesh_name

  real(dp) :: xmin,xmax,ymin,ymax    ! extent of bundle conductors
  real(dp) :: xc,yc                  ! centre of bundle conductors
  real(dp) :: rboundary              ! free space boundary radius

! variables required for generating the gmsh geometry input file: we may be able to simplify 
! things here as there is some overlap with the PUL structure
  integer,allocatable  :: shape_type(:)  ! holds a nuber which indicates the shape type
44c11f06   Chris Smartt   Include software ...
121
  integer,allocatable  :: loop_number(:) ! holds the loop number for this shape
886c558b   Steve Greedy   SACAMOS Public Re...
122
123
124
125
126
127
  real(dp),allocatable :: x(:)           ! x coordinate of the centre of the cable to which this shape belongs
  real(dp),allocatable :: y(:)           ! y coordinate of the centre of the cable to which this shape belongs
  real(dp),allocatable :: r(:)           ! radius of a circular shape or curve radius for a Dshape
  real(dp),allocatable :: rw(:)          ! width1  (x dimension) of rectangular/ Dshape
  real(dp),allocatable :: rw2(:)         ! width2  (x dimension) of rectangular/ Dshape
  real(dp),allocatable :: rh(:)          ! height (y dimension) of rectangular shape
44c11f06   Chris Smartt   Include software ...
128
129
  real(dp),allocatable :: rox(:)         ! offset in the x direction of this shape from the centre (x():),y(:) above)
  real(dp),allocatable :: roy(:)         ! offset in the y direction of this shape from the centre (x():),y(:) above)
886c558b   Steve Greedy   SACAMOS Public Re...
130
131
132
  real(dp),allocatable :: rtheta(:)      ! rotation angle of conductor
  real(dp),allocatable :: dl(:)          ! edge length for the mesh on this shape
  logical,allocatable  :: conductor_has_dielectric(:) ! flag to indicate that a conductor has a dielectric around it
44c11f06   Chris Smartt   Include software ...
133
134

  real(dp) :: dl_local                   ! edge length for the mesh at rectangle edge centre
886c558b   Steve Greedy   SACAMOS Public Re...
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
  
  complex(dp) :: epsr  ! relative permittivity value
  
  integer,allocatable  :: shape_to_region(:,:)     ! array which stores the inner and outer region numbers for each shape 
                                                   ! undefined regions (inside PEC or outside the outer boundary) are set to -1
  
  logical  :: first_surface_is_free_space_boundary ! flag to indicate properties on the first surface defined
  
! counters for conductors, points, lines etc. Should be self explanatory
  integer  :: n_conductors_without_ground_plane
  integer  :: tot_n_conductors,conductor
  integer  :: tot_n_boundaries
  integer  :: n_points,point
  integer  :: n_lines,line
  integer  :: n_line_loops,line_loop
  integer  :: n_surfaces,surface  
  integer  :: n_dielectric_regions,tot_n_dielectric_regions,dielectric_region
  integer  :: n_shapes,shape,conductor_shape
  integer  :: matrix_dimension
  
  complex(dp),allocatable :: dielectric_region_epsr(:)  ! list of the relative permittivity of each region

! temporary variables used in writing the geometry input file for gmsh  
  real(dp) :: rl,rt,rdl,rx1,rx2,ry1,ry2
  real(dp) :: xp,yp,xt,yt
  integer  :: p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11,p12
44c11f06   Chris Smartt   Include software ...
161
  real(dp) :: edge_length
886c558b   Steve Greedy   SACAMOS Public Re...
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181

  character(LEN=filename_length) :: command                  ! string used for the command which runs gmsh from the shell
  integer  :: gmsh_exit_stat     ! exit status from the shell command which runs gmsh.
    
  type(matrix)        :: mat1    ! temporary matrix
  type(matrix)        :: mat2    ! temporary matrix
  
! frequency dependent dielectric variables

  integer         :: floop               ! frequency loop variable
  real(dp)        :: f                   ! frequency
  
  type(matrix),allocatable   :: C_freq(:)    ! frequency dependent Capacitance matrices for each frequency of evaluation
  type(matrix),allocatable   :: G_freq(:)    ! frequency dependent Conductance matrices for each frequency of evaluation
  
  complex(dp),allocatable :: function_to_fit(:)    ! complex function to be fitted using Sfilter_fit

  logical :: dielectric_defined                ! flag to indicate whether there is a dielectric   
  logical :: frequency_dependent_dielectric    ! flag to indicate whether there is a frequency dependent dielectric
  
44c11f06   Chris Smartt   Include software ...
182
183
  integer  :: gpline1,gpline2            ! line segments for infinite ground plane
  
886c558b   Steve Greedy   SACAMOS Public Re...
184
185
186
187
188
189
190
191
192
193
  integer  :: row,col            ! loop variables for matrix elements
  
  integer  :: i,ii               ! temporary loop variables

! START
  if (verbose) write(*,*)'CALLED: PUL_LC_Laplace'

! STAGE 1: work out the configuration for the calculation i.e. is there a ground plane, is the outer boundary free space or a conductor (overshield)

  ground_plane=.FALSE.
44c11f06   Chris Smartt   Include software ...
194
195
  infinite_ground_plane=.FALSE.
  finite_ground_plane=.FALSE.
886c558b   Steve Greedy   SACAMOS Public Re...
196
197
  overshield=.FALSE.
  open_boundary=.FALSE.
44c11f06   Chris Smartt   Include software ...
198
  
886c558b   Steve Greedy   SACAMOS Public Re...
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
  if ((.NOT.PUL%overshield_present).AND.(.NOT.PUL%ground_plane_present)) then

! SOLUTION TYPE 1: NO OVERSHIELD, NO GROUND PLANE

    open_boundary=.TRUE.
    first_surface_is_free_space_boundary=.TRUE.
    end_conductor_loop=PUL%n_conductors
    end_conductor_to_dielectric_loop=PUL%n_conductors
    tot_n_boundaries_without_dielectric=PUL%n_conductors+1   ! add a free space boundary
    first_conductor_shape=2                    ! shape 1 is for the outer boundary
         
  else if ((.NOT.PUL%overshield_present).AND.(PUL%ground_plane_present)) then 

! SOLUTION TYPE 2:  NO OVERSHIELD, WITH GROUND PLANE

    ground_plane=.TRUE.
44c11f06   Chris Smartt   Include software ...
215
216
217
218
219
220
221
    if (inf_gnd) then
      infinite_ground_plane=.TRUE.
    else
      finite_ground_plane=.TRUE.    
    end if
    
    tot_n_boundaries_without_dielectric=PUL%n_conductors+1   ! add a free space boundary
886c558b   Steve Greedy   SACAMOS Public Re...
222
223
    first_surface_is_free_space_boundary=.TRUE.
    end_conductor_loop=PUL%n_conductors-1                    ! the ground plane is not included here - added separately
44c11f06   Chris Smartt   Include software ...
224
    end_conductor_to_dielectric_loop=PUL%n_conductors    
886c558b   Steve Greedy   SACAMOS Public Re...
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
    first_conductor_shape=2                    ! shape 1 is for the outer boundary

  else
  
! SOLUTION TYPE 3:  THERE IS AN OVERSHIELD WHICH FORMS THE OUTER BOUNDARY OF THE DOMAIN

    overshield=.TRUE.
    first_surface_is_free_space_boundary=.FALSE.
    end_conductor_loop=PUL%n_conductors-1
    end_conductor_to_dielectric_loop=PUL%n_conductors-1      ! overshield has no dielectric in the internal domain
    tot_n_boundaries_without_dielectric=PUL%n_conductors
    first_conductor_shape=1                    ! shape 1 is a conductor

  end if ! no overshield
  
  if (verbose) then
    write(*,*)'ground_plane:',ground_plane
44c11f06   Chris Smartt   Include software ...
242
243
    write(*,*)'infinite_ground_plane:',infinite_ground_plane
    write(*,*)'finite_ground_plane:',finite_ground_plane
886c558b   Steve Greedy   SACAMOS Public Re...
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
    write(*,*)'open_boundary:',open_boundary
    write(*,*)'overshield:',overshield
    write(*,*)'first_surface_is_free_space_boundary:',first_surface_is_free_space_boundary
    write(*,*)'N_conductors:',PUL%n_conductors
    write(*,*)'end_conductor_loop:',end_conductor_loop
    write(*,*)'end_conductor_to_dielectric_loop:',end_conductor_to_dielectric_loop
    write(*,*)'tot_n_boundaries_without_dielectric:',tot_n_boundaries_without_dielectric
    write(*,*)'first_conductor_shape:',first_conductor_shape
  end if  ! verbose
  
! STAGE 2: Work out the numbers of conductors, points, lines, line loops and surfaces in the cross section geometry
  
  tot_n_conductors  = PUL%n_conductors        ! the conductor count includes the ground plane if present

! Count the dielectric regions: 
! Each dielectric region adds a boundary and another surface to mesh so work out whether a dielectric 
! is present for each conductor.
! A dielectric region is assumed to exist if the dielectric radius is larger than the conductor radius and
! the relative permittivity at d.c. is not equal to 1 or the permittivity model order is not equal to zero

  ALLOCATE ( conductor_has_dielectric(1:PUL%n_conductors) )
  
  n_dielectric_regions=0
  do conductor=1,end_conductor_loop           

! assume no dielectric initially          
    conductor_has_dielectric(conductor)=.FALSE.

! If the low freq permittivity is not 1.0 or the order of the filter model is not 0 then assume we have a dielectric
    dielectric_defined=.FALSE.
    
! check the low frequency value of epsr  
    epsr=PUL%epsr(conductor)%a%coeff(0)/PUL%epsr(conductor)%b%coeff(0)
    if ( abs(epsr-1d0).GT.small ) dielectric_defined=.TRUE.
    
! check the model order  
    if ( (PUL%epsr(conductor)%a%order.GT.0).OR. (PUL%epsr(conductor)%b%order.GT.0) ) dielectric_defined=.TRUE.

! for now use the high frequency limit of epsr  
    epsr=evaluate_Sfilter_high_frequency_limit(PUL%epsr(conductor))
    
    if (PUL%shape(conductor).EQ.circle) THEN

      if (  ( (PUL%rd(conductor)-PUL%r(conductor)).GT.small ).AND.( dielectric_defined )  ) then
        n_dielectric_regions= n_dielectric_regions+1
        conductor_has_dielectric(conductor)=.TRUE.
      end if
      
    else if (PUL%shape(conductor).EQ.rectangle) THEN
    
! include dielectric region if the dielectric is not air and there is a dielectric region surrounding the conductor    

      if (  ( dielectric_defined ).AND. ( ( PUL%rdw(conductor).GT.small ).AND.( PUL%rdw(conductor).GT.small ) )  ) then
        n_dielectric_regions= n_dielectric_regions+1
        conductor_has_dielectric(conductor)=.TRUE.
      end if   
    
    end if
    
  end do  ! next conductor
  
  tot_n_boundaries  = tot_n_boundaries_without_dielectric+n_dielectric_regions 
  tot_n_dielectric_regions = n_dielectric_regions+1                ! add a dielectric region for the 'free space' region
  
  n_points    = 5*tot_n_boundaries       ! Each region is enclosed by a shape, defined by 5 points
  n_lines     = 4*tot_n_boundaries       ! Each region is enclosed by a shape, defined by 4 lines
  n_line_loops=   tot_n_boundaries       ! Each region is enclosed by a shape, defined by a single line loop
  n_surfaces  =   n_dielectric_regions+1 ! Each dielectric region plus the free space region are a separate surface
  
  if (verbose) then
    write(*,*)'Number of dielectric regions   =',n_dielectric_regions
    write(*,*)'Total number of regions        =',tot_n_dielectric_regions
    write(*,*)'Total number of conductors     =',tot_n_conductors
    write(*,*)'Total number of boundaries     =',tot_n_boundaries
    write(*,*)'first_surface_is_free_space_boundary? ',first_surface_is_free_space_boundary
  end if

! STAGE 3: Create the input file for the mesh generator, gmsh.

! Allocate the memory required for all the boundaries in the cross section geometry
  n_shapes=tot_n_boundaries
  ALLOCATE( shape_type(1:n_shapes) )
  shape_type(1:n_shapes)=circle       ! set all boudaries to type circle initially
44c11f06   Chris Smartt   Include software ...
327
328
  ALLOCATE( loop_number(1:n_shapes) )
  loop_number(1:n_shapes)=-1          ! set all boudaries to -1 i.e. not set
886c558b   Steve Greedy   SACAMOS Public Re...
329
330
331
332
333
334
  ALLOCATE( x(1:n_shapes) )
  ALLOCATE( y(1:n_shapes) )
  ALLOCATE( r(1:n_shapes) )
  ALLOCATE( rw(1:n_shapes) )
  ALLOCATE( rw2(1:n_shapes) )
  ALLOCATE( rh(1:n_shapes) )
44c11f06   Chris Smartt   Include software ...
335
336
  ALLOCATE( rox(1:n_shapes) )   
  ALLOCATE( roy(1:n_shapes) )   
886c558b   Steve Greedy   SACAMOS Public Re...
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
  ALLOCATE( rtheta(1:n_shapes) )
  ALLOCATE( dl(1:n_shapes) )
  ALLOCATE( shape_to_region(1:n_shapes,1:2) )
  shape_to_region(1:n_shapes,1:2)=-1          ! set all regions to undefined initially
  
  ALLOCATE( dielectric_region_epsr(0:n_dielectric_regions) )
  
  if (.NOT.overshield) then 
  
! Set the position of the outer free space boundary. This is related to the size of the cable bundle enclosed
! by the Laplace_boundary_constant

! First get the extent of the bundle
    xmin=large
    xmax=-large
    ymin=large
    ymax=-large
  
    do i=1,end_conductor_loop            ! if the last conductor is the ground plane it is included in x/y,max/min calculation later
      if (PUL%shape(i).EQ.circle) then
    
44c11f06   Chris Smartt   Include software ...
358
359
360
361
        xmin=min(xmin,PUL%x(i)-PUL%r(i)+PUL%ox(i))  
        xmax=max(xmax,PUL%x(i)+PUL%r(i)+PUL%ox(i))  
        ymin=min(ymin,PUL%y(i)-PUL%r(i)+PUL%oy(i)) 
        ymax=max(ymax,PUL%y(i)+PUL%r(i)+PUL%oy(i)) 
886c558b   Steve Greedy   SACAMOS Public Re...
362
363
364

      else if (PUL%shape(i).EQ.rectangle) then
    
44c11f06   Chris Smartt   Include software ...
365
366
367
368
        xmin=min(xmin,PUL%x(i)-PUL%rw(i)+PUL%ox(i)) 
        xmax=max(xmax,PUL%x(i)+PUL%rw(i)+PUL%ox(i)) 
        ymin=min(ymin,PUL%y(i)-PUL%rh(i)+PUL%oy(i)) 
        ymax=max(ymax,PUL%y(i)+PUL%rh(i)+PUL%oy(i)) 
886c558b   Steve Greedy   SACAMOS Public Re...
369
370
371
372
373
374
375
376
377
      
      else if (PUL%shape(i).EQ.Dshape) then

!*** Does this have to take rotation into account ? *****
        xmin=min(xmin,PUL%x(i)-PUL%rw(i))
        xmax=max(xmax,PUL%x(i)+PUL%rw(i))
        ymin=min(ymin,PUL%y(i)-PUL%rh(i))
        ymax=max(ymax,PUL%y(i)+PUL%rh(i))

44c11f06   Chris Smartt   Include software ...
378
379
380
381
! note don't check semicircle as this is only for infinite ground only

      else if (PUL%shape(i).NE.semicircle) then
      
886c558b   Steve Greedy   SACAMOS Public Re...
382
        write(*,*)'Unknown shape type',PUL%shape(i)
44c11f06   Chris Smartt   Include software ...
383
        
886c558b   Steve Greedy   SACAMOS Public Re...
384
385
386
387
      end if
    end do ! next conductor
     
    if (ground_plane) then 
44c11f06   Chris Smartt   Include software ...
388
! include the ground plane in the bundle sizing by adding the origin point
886c558b   Steve Greedy   SACAMOS Public Re...
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
! here we assume that the ground plane is along the x axis.

      xmin=min(xmin,0d0)
      xmax=max(xmax,0d0)
      ymin=min(ymin,0d0)
      ymax=max(ymax,0d0)
           
    end if ! ground_plane
  
! Centre of conductor bundle 
    
    xc=(xmax+xmin)/2d0
    yc=(ymax+ymin)/2d0
  
  rboundary=max((xmax-xmin),(ymax-ymin))*Laplace_boundary_constant
  
    if (verbose) then
      write(*,*)'bundle xmin=',xmin,' bundle xmax=',xmax
      write(*,*)'bundle ymin=',ymin,' bundle ymax=',ymax
      write(*,*)'bundle centre=',xc,yc
      write(*,*)'boundary radius=',rboundary
    end if
  
44c11f06   Chris Smartt   Include software ...
412
413
414
! set the first shape information to relate to the outer boundary
! 
! If we have a finite gound plane of free space boundary then this is a circle, centred on the bundle centre
886c558b   Steve Greedy   SACAMOS Public Re...
415
416
417
! note that for the Laplace calculation the geometry will be shifted so that the origin is at xc,yc so the
! free space outer boundary is centred on the origin. This is required for the free space boundary condition in Laplace to work correctly.

44c11f06   Chris Smartt   Include software ...
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
    if (.NOT.infinite_ground_plane) then
    
      x(1)=xc
      y(1)=yc
      r(1)=rboundary
      rw(1)=0d0
      rw2(1)=0d0
      rh(1)=0d0
      rox(1)=0d0     
      roy(1)=0d0     
      rtheta(1)=0d0
      dl(1)=r(1)/(2*Laplace_surface_mesh_constant)
      shape_to_region(1,inside) =0      ! inside is the dielectric region
      shape_to_region(1,outside)=-1     ! no outside region
      
    else
!
! If we have an infinite ground plane then we have a semicircle centred on the origin

      shape_type(1)=semicircle
      xc=0d0
      yc=0d0
      x(1)=xc
      y(1)=yc
      r(1)=rboundary
      rw(1)=0d0
      rw2(1)=0d0
      rh(1)=0d0
      rox(1)=0d0     
      roy(1)=0d0     
      rtheta(1)=0d0
      dl(1)=r(1)/(2*Laplace_surface_mesh_constant)
      shape_to_region(1,inside) =0      ! inside is the dielectric region
      shape_to_region(1,outside)=-1     ! no outside region

    end if ! infinite ground plane
886c558b   Steve Greedy   SACAMOS Public Re...
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
       
  else  ! there is an overshield specified so we do not need to offset the bundle to define a free space outer boundary
    
    xc=0d0
    yc=0d0
        
  end if ! overshield

  dielectric_region_epsr(0)= evaluate_Sfilter_high_frequency_limit(PUL%epsr_background) ! set material properties in region 0, the background region
  
! copy the conductor information from the PUL structure to the shape based structure

  do i=1,end_conductor_loop  ! all conductors except the ground plane if it exists
    shape=first_conductor_shape-1+i
    shape_type(shape)=PUL%shape(i)
    x(shape)=PUL%x(i)
    y(shape)=PUL%y(i)
    r(shape)=PUL%r(i)
    rw(shape)=PUL%rw(i)
    rw2(shape)=PUL%rw2(i)
    rh(shape)=PUL%rh(i)
44c11f06   Chris Smartt   Include software ...
475
476
    rox(shape)=PUL%ox(i)  
    roy(shape)=PUL%oy(i)  
886c558b   Steve Greedy   SACAMOS Public Re...
477
478
479
480
481
482
483
    rtheta(shape)=PUL%rtheta(i)
    if (shape_type(shape).EQ.circle) then
      dl(shape)=r(shape)/Laplace_surface_mesh_constant
    else if (shape_type(shape).EQ.rectangle) then
      dl(shape)=min(rw(shape),rh(shape))/Laplace_surface_mesh_constant   
    else if (shape_type(shape).EQ.Dshape) then
      dl(shape)=r(shape)/(2D0*Laplace_surface_mesh_constant)
44c11f06   Chris Smartt   Include software ...
484
485
    else if (shape_type(shape).EQ.semicircle) then
      dl(shape)=r(shape)/Laplace_surface_mesh_constant
886c558b   Steve Greedy   SACAMOS Public Re...
486
487
488
489
490
491
492
493
    else
      write(*,*)'Unknown shape type',shape_type(shape),' i=',i,' shape=',shape
    end if
  end do
  
  if (ground_plane) then ! Add the ground plane information
  
    shape=PUL%n_conductors+1   ! ground plane
44c11f06   Chris Smartt   Include software ...
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
    
    if (finite_ground_plane) then
    
      shape_type(shape)=rectangle      
      rl=rboundary*Laplace_ground_plane_ratio         ! width of the ground plane (x dimension)  see constants.F90 for parameter
      rt=rl*Laplace_ground_plane_thickness_ratio      ! height of the ground plane (y dimension)  see constants.F90 for parameter
      rdl=rt/2d0
      x(shape)=xc                           ! x centre of ground plane rectangle
      y(shape)=-rt                          ! y centre of ground plane rectangle
      r(shape)=0d0                          ! not used
      rw(shape)=rl*2d0                      ! x extent of the ground plane
      rw2(shape)=rw(shape)                  ! x extent of the ground plane
      rh(shape)=rt*2d0                      ! y extent of the ground plane
      rox(shape)=0d0                        ! no offset from centre
      roy(shape)=0d0                        ! no offset from centre
      rtheta(shape)=0d0                     ! always zero for ground plane
      dl(shape)=rdl                         ! this is the thickness of the ground plane
      shape_to_region(shape,inside)           =-1     !  no internal region 
      shape_to_region(shape,outside)          = 0     !  no dielectric so a free space region   
    
    else
    
      shape_type(shape)=semicircle_diameter    
      rl=0d0                                ! not used
      rt=0d0                                ! not used          
      rdl=0d0                               ! not used    
      x(shape)=0d0                          ! x centre of ground plane 
      y(shape)=0d0                          ! y centre of ground plane 
      r(shape)=rboundary                    ! semicircle radius    
      rw(shape)=0d0                         ! not used
      rw2(shape)=0d0                        ! not used
      rh(shape)=0d0                         ! not used
      rox(shape)=0d0                         ! no offset from centre
      roy(shape)=0d0                         ! no offset from centre
      rtheta(shape)=0d0                     ! always zero for infinite ground plane
      dl(shape)=r(1)/(2*Laplace_surface_mesh_constant)
      shape_to_region(shape,inside)           =-1     !  no internal region 
      shape_to_region(shape,outside)          = 0     !  no dielectric so a free space region   
    
    end if ! infinite ground plane
886c558b   Steve Greedy   SACAMOS Public Re...
534
535
536
537
538
539
540
541
542
543
544
  
  else if (overshield) then ! Add the overshield conductor information 

    shape=PUL%n_conductors
    shape_type(shape)=PUL%overshield_shape
    x(shape)=PUL%overshield_x
    y(shape)=PUL%overshield_y
    r(shape)=PUL%overshield_r
    rw(shape)=PUL%overshield_w
    rw2(shape)=PUL%overshield_w2
    rh(shape)=PUL%overshield_h
44c11f06   Chris Smartt   Include software ...
545
546
    rox(shape)=0d0   
    roy(shape)=0d0   
886c558b   Steve Greedy   SACAMOS Public Re...
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
    rtheta(shape)=0d0
    dl(shape)=r(shape)/(2d0*Laplace_surface_mesh_constant)
    shape_to_region(shape,inside) = 0        ! inside the overshield is the free space region
  
  end if ! overshield
  
! loop over conductors copying the associated dielectric information from the PUL structure, 
! also associate shapes with regions

  dielectric_region=0
  
  do i=1,end_conductor_loop       ! exclude the ground plane if it exists as it has no dielectric region

    conductor_shape=first_conductor_shape-1+i   ! shape number for the conductor
    shape_to_region(conductor_shape,inside) =-1  ! conductors have no inner surface
    
    if (conductor_has_dielectric(i)) then
    
      dielectric_region=dielectric_region+1
      shape=shape+1                            ! create a new shape number for the dielectric
      shape_type(shape)=PUL%shape(i)           ! the dielectric is the same shape as the conductor 
      x(shape)=PUL%x(i)
      y(shape)=PUL%y(i)
      r(shape)=PUL%rd(i)
      rw(shape)=PUL%rdw(i)          
      rw2(shape)=PUL%rw2(i)         
      rh(shape)=PUL%rdh(i)          
44c11f06   Chris Smartt   Include software ...
574
575
      rox(shape)=PUL%rdox(i)          
      roy(shape)=PUL%rdoy(i)          
886c558b   Steve Greedy   SACAMOS Public Re...
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
      rtheta(shape)=PUL%rtheta(i)   
      
      if (shape_type(shape).EQ.circle) then                 
        dl(shape)=r(shape)/Laplace_surface_mesh_constant
      else if (shape_type(shape).EQ.rectangle) then
        dl(shape)=min(rw(shape),rh(shape))/Laplace_surface_mesh_constant   
      else if (shape_type(shape).EQ.Dshape) then
        dl(shape)=r(shape)/(2D0*Laplace_surface_mesh_constant)
      else
        write(*,*)'Unknown shape type',shape_type(shape)
      end if
      
      shape_to_region(shape,inside)            =dielectric_region
      shape_to_region(shape,outside)           =0                   ! free space region
      dielectric_region_epsr(dielectric_region)=evaluate_Sfilter_high_frequency_limit(PUL%epsr(i))
      
    else
! no dielectric

      shape_to_region(conductor_shape,outside)           =0      !  no dielectric so a free space region 
      
    end if  ! this conductor has a dielectric or not
    
  end do    ! next conductor
  
! Work out which conductors are associated with which dielectrics 
  
  do i=1,end_conductor_loop       
  
    conductor_shape=first_conductor_shape-1+i   ! shape number for the conductor
    dielectric_region=0
    
! calculate the centre of the conductor (the test point)

! xp,yp is the coordinate of the centre of the conductor relative to the centre of the cable
44c11f06   Chris Smartt   Include software ...
611
612
    xp=rox(conductor_shape)
    yp=roy(conductor_shape)
886c558b   Steve Greedy   SACAMOS Public Re...
613
614
615
616
617
618
619
620
621
622

! rotate the cable about it's origin then translate to the cable position to give the final conductor position      
    xt=x(conductor_shape)+xp*cos(rtheta(conductor_shape))-yp*sin(rtheta(conductor_shape))
    yt=y(conductor_shape)+xp*sin(rtheta(conductor_shape))+yp*cos(rtheta(conductor_shape))
    
! loop over dielectrc shapes
    do shape=tot_n_boundaries_without_dielectric+1,tot_n_boundaries   
      dielectric_region=dielectric_region+1
      
! check whether the conductor is inside the dielectric
44c11f06   Chris Smartt   Include software ...
623
624
      if (point_is_inside(xt,yt,shape_type(shape),x(shape),y(shape),r(shape),rh(shape),rw(shape),  &
                          rox(shape),roy(shape),rtheta(shape))) then
886c558b   Steve Greedy   SACAMOS Public Re...
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
                          
        shape_to_region(conductor_shape,outside) =dielectric_region
       
        write(*,*)'Conductor ',i,' is inside dielectric',dielectric_region,'(shape',shape,'):'

      endif
      
    end do ! next dielectric shape
    
  end do ! next conductor
  
  
  if (verbose) then
    write(*,*)'      shape shape_type  x(shape)   y(shape)   r(shape)  rh(shape)  rw(shape) rtheta(shape) dl(shape)'
    do shape=1,n_shapes
      write(*,'(2I10,7F12.6)')shape,shape_type(shape),x(shape),y(shape),r(shape),rw(shape),rh(shape),rtheta(shape),dl(shape)
    end do
  end if

! Open a file for the gmsh geometry input data

  temp_string=trim(name)//'_geometry_domain_'
  CALL add_integer_to_string(temp_string,domain,geom_filename)
  geom_filename=trim(geom_filename)//gmsh_geometry_file_extn

  open (unit=gmsh_geometry_file_unit,file=trim(geom_filename))
  if (verbose) write(*,*)'Opened file:',trim(geom_filename)

! open a file for the boundary information  
  open(unit=boundary_file_unit,file=boundary_file_name)
  if (verbose) write(*,*)'Opened file:',boundary_file_name

! write the points required to define the each shape
    
! Translate all coordinates by (-xc,-yc) such that a free space outer boundary is centred at the origin
  point=0
  
  do i=1,n_shapes
    
    if (shape_type(i).EQ.circle) then
    
      write(gmsh_geometry_file_unit,*)' // circle ',i
      point=point+1
44c11f06   Chris Smartt   Include software ...
668
669
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',x(i)-xc+rox(i),','    &
                                       ,y(i)-yc+roy(i),',',0.0,','     ,dl(i),' };'
886c558b   Steve Greedy   SACAMOS Public Re...
670
      point=point+1
44c11f06   Chris Smartt   Include software ...
671
672
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',x(i)-xc+rox(i),','    &
                                       ,y(i)-yc-r(i)+roy(i),',',0.0,',',dl(i),' };'
886c558b   Steve Greedy   SACAMOS Public Re...
673
      point=point+1
44c11f06   Chris Smartt   Include software ...
674
675
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',x(i)-xc+rox(i)+r(i),','    &
                                      ,y(i)-yc+roy(i),',',0.0,','     ,dl(i),' };'
886c558b   Steve Greedy   SACAMOS Public Re...
676
      point=point+1
44c11f06   Chris Smartt   Include software ...
677
678
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',x(i)-xc+rox(i),','    &
                                      ,y(i)-yc+r(i)+roy(i),',',0.0,',',dl(i),' };'
886c558b   Steve Greedy   SACAMOS Public Re...
679
      point=point+1
44c11f06   Chris Smartt   Include software ...
680
681
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',x(i)-xc+rox(i)-r(i),','    &
                                      ,y(i)-yc+roy(i),',',0.0,','     ,dl(i),' };'
886c558b   Steve Greedy   SACAMOS Public Re...
682
683
684
685
      
    else if (shape_type(i).EQ.rectangle) then

      write(gmsh_geometry_file_unit,*)' // rectangle ',i
44c11f06   Chris Smartt   Include software ...
686
687
688
689
690

! corner point
      point=point+1      
      xt=rw(i)/2d0+rox(i)
      yt=rh(i)/2d0+roy(i)
886c558b   Steve Greedy   SACAMOS Public Re...
691
692
      xp=x(i)-xc+xt*cos(rtheta(i))-yt*sin(rtheta(i))
      yp=y(i)-yc+xt*sin(rtheta(i))+yt*cos(rtheta(i))
44c11f06   Chris Smartt   Include software ...
693
694
695
696
697
698
699
      edge_length=min(max_mesh_edge_length,dl(i))
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',xp,',',yp,',',0.0,',',edge_length,' };'

! edge centre point
      point=point+1      
      xt=rox(i)
      yt=rh(i)/2d0+roy(i)
886c558b   Steve Greedy   SACAMOS Public Re...
700
701
      xp=x(i)-xc+xt*cos(rtheta(i))-yt*sin(rtheta(i))
      yp=y(i)-yc+xt*sin(rtheta(i))+yt*cos(rtheta(i))
44c11f06   Chris Smartt   Include software ...
702
703
704
705
706
707
708
      dl_local=min(max_mesh_edge_length,rw(i)/Laplace_surface_mesh_constant)
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',xp,',',yp,',',0.0,',',dl_local,' };'

! corner point
      point=point+1      
      xt=-rw(i)/2d0+rox(i)
      yt=rh(i)/2d0+roy(i)
886c558b   Steve Greedy   SACAMOS Public Re...
709
710
      xp=x(i)-xc+xt*cos(rtheta(i))-yt*sin(rtheta(i))
      yp=y(i)-yc+xt*sin(rtheta(i))+yt*cos(rtheta(i))
44c11f06   Chris Smartt   Include software ...
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
      edge_length=min(max_mesh_edge_length,dl(i))
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',xp,',',yp,',',0.0,',',edge_length,' };'

! edge centre point
      point=point+1      
      xt=-rw(i)/2d0+rox(i)
      yt=roy(i)
      xp=x(i)-xc+xt*cos(rtheta(i))-yt*sin(rtheta(i))
      yp=y(i)-yc+xt*sin(rtheta(i))+yt*cos(rtheta(i))
      dl_local=min(max_mesh_edge_length,rh(i)/Laplace_surface_mesh_constant)
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',xp,',',yp,',',0.0,',',dl_local,' };'

! corner point
      point=point+1      
      xt=-rw(i)/2d0+rox(i)
      yt=-rh(i)/2d0+roy(i)
      xp=x(i)-xc+xt*cos(rtheta(i))-yt*sin(rtheta(i))
      yp=y(i)-yc+xt*sin(rtheta(i))+yt*cos(rtheta(i))
      edge_length=min(max_mesh_edge_length,dl(i))
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',xp,',',yp,',',0.0,',',edge_length,' };'

! edge centre point
      point=point+1      
      xt=rox(i)
      yt=-rh(i)/2d0+roy(i)
      xp=x(i)-xc+xt*cos(rtheta(i))-yt*sin(rtheta(i))
      yp=y(i)-yc+xt*sin(rtheta(i))+yt*cos(rtheta(i))
      dl_local=min(max_mesh_edge_length,rw(i)/Laplace_surface_mesh_constant)
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',xp,',',yp,',',0.0,',',dl_local,' };'

! corner point
      point=point+1      
      xt=rw(i)/2d0+rox(i)
      yt=-rh(i)/2d0+roy(i)
886c558b   Steve Greedy   SACAMOS Public Re...
745
746
      xp=x(i)-xc+xt*cos(rtheta(i))-yt*sin(rtheta(i))
      yp=y(i)-yc+xt*sin(rtheta(i))+yt*cos(rtheta(i))
44c11f06   Chris Smartt   Include software ...
747
748
749
750
751
752
753
754
755
756
757
      edge_length=min(max_mesh_edge_length,dl(i))
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',xp,',',yp,',',0.0,',',edge_length,' };'

! edge centre point
      point=point+1      
      xt=rw(i)/2d0+rox(i)
      yt=roy(i)
      xp=x(i)-xc+xt*cos(rtheta(i))-yt*sin(rtheta(i))
      yp=y(i)-yc+xt*sin(rtheta(i))+yt*cos(rtheta(i))
      dl_local=min(max_mesh_edge_length,rh(i)/Laplace_surface_mesh_constant)
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',xp,',',yp,',',0.0,',',dl_local,' };'
886c558b   Steve Greedy   SACAMOS Public Re...
758
759
760
      
    else if (shape_type(i).EQ.Dshape) then

44c11f06   Chris Smartt   Include software ...
761
762
763
      CALL write_Dshape_gmsh(x(i),y(i),rw(i),rw2(i),rh(i),r(i),rox(i),roy(i),rtheta(i),dl(i),point,i,gmsh_geometry_file_unit)
 
    else if (shape_type(i).EQ.semicircle) then
886c558b   Steve Greedy   SACAMOS Public Re...
764
    
44c11f06   Chris Smartt   Include software ...
765
766
767
768
769
770
771
772
773
774
775
776
777
      write(gmsh_geometry_file_unit,*)' // semicircle ',i
      point=point+1
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',x(i)-xc+rox(i),','         &
                                      ,y(i)-yc+roy(i),',',0.0,','     ,dl(i),' };'
      point=point+1
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',x(i)-xc+rox(i)+r(i),','    &
                                      ,y(i)-yc+roy(i),',',0.0,',',dl(i),' };'
      point=point+1
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',x(i)-xc+rox(i)     ,','    &
                                      ,y(i)-yc+r(i)+roy(i),',',0.0,','     ,dl(i),' };'
      point=point+1
      write(gmsh_geometry_file_unit,*)'Point(',point,' ) = {',x(i)-xc+rox(i)-r(i),','    &
                                      ,y(i)-yc+roy(i),',',0.0,',',dl(i),' };'
886c558b   Steve Greedy   SACAMOS Public Re...
778
    
44c11f06   Chris Smartt   Include software ...
779
780
    end if

886c558b   Steve Greedy   SACAMOS Public Re...
781
  end do ! next shape
44c11f06   Chris Smartt   Include software ...
782
       
886c558b   Steve Greedy   SACAMOS Public Re...
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
! write the boudary line segment definitions for each shape, these are constructed from the previously defined points

  write(gmsh_geometry_file_unit,*)' '
  
  point=0      ! initialise point counter
  line=0       ! initialise line counter
  
  do i=1,n_shapes
    
    if (shape_type(i).EQ.circle) then
    
      p1=point+1
      p2=point+2
      p3=point+3
      p4=point+4
      p5=point+5
      
      write(gmsh_geometry_file_unit,*)' // circle ',i
      line=line+1
      write(gmsh_geometry_file_unit,*)'Circle(',line,' ) = {',p2,',',p1,',',p3,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Circle(',line,' ) = {',p3,',',p1,',',p4,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Circle(',line,' ) = {',p4,',',p1,',',p5,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Circle(',line,' ) = {',p5,',',p1,',',p2,' };'
      
      point=point+5
     
    else if (shape_type(i).EQ.rectangle) then

      p1=point+1
      p2=point+2
      p3=point+3
      p4=point+4
44c11f06   Chris Smartt   Include software ...
818
819
820
821
      p5=point+5
      p6=point+6
      p7=point+7
      p8=point+8
886c558b   Steve Greedy   SACAMOS Public Re...
822
823
824
825
826
827
828
829
830
     
      write(gmsh_geometry_file_unit,*)' // rectangle line segments ',i
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p1,',',p2,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p2,',',p3,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p3,',',p4,' };'
      line=line+1
44c11f06   Chris Smartt   Include software ...
831
832
833
834
835
836
837
838
839
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p4,',',p5,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p5,',',p6,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p6,',',p7,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p7,',',p8,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p8,',',p1,' };'
886c558b   Steve Greedy   SACAMOS Public Re...
840
      
44c11f06   Chris Smartt   Include software ...
841
      point=point+8
886c558b   Steve Greedy   SACAMOS Public Re...
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
     
    else if (shape_type(i).EQ.Dshape) then

      p1=point+1
      p2=point+2
      p3=point+3
      p4=point+4
      p5=point+5
      p6=point+6
      p7=point+7
      p8=point+8
      p9=point+9
      p10=point+10
      p11=point+11
      p12=point+12
    
      write(gmsh_geometry_file_unit,*)' // Dshape line segments',i
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p1,',',p2,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Circle(',line,' ) = {',p2,',',p3,',',p4,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p4,',',p5,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Circle(',line,' ) = {',p5,',',p6,',',p7,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p7,',',p8,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Circle(',line,' ) = {',p8,',',p9,',',p10,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p10,',',p11,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Circle(',line,' ) = {',p11,',',p12,',',p1,' };'
     
      point=point+12
44c11f06   Chris Smartt   Include software ...
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
      
    else if (shape_type(i).EQ.semicircle) then
    
      p1=point+1
      p2=point+2
      p3=point+3
      p4=point+4
      
      write(gmsh_geometry_file_unit,*)' // semicircle ',i
      line=line+1
      write(gmsh_geometry_file_unit,*)'Circle(',line,' ) = {',p2,',',p1,',',p3,' };'
      line=line+1
      write(gmsh_geometry_file_unit,*)'Circle(',line,' ) = {',p3,',',p1,',',p4,' };'
      
      point=point+4
      
    else if (shape_type(i).EQ.semicircle_diameter) then
! this is the infinite ground plane line so pick points from the outer boundary circle
      p1=4     ! semicircle end point 2
      p2=1     ! centre
      p3=2     ! semicircle end point 1
      
      write(gmsh_geometry_file_unit,*)' // semicircle_diameter ',i
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p1,',',p2,' };'
      gpline1=line
      line=line+1
      write(gmsh_geometry_file_unit,*)'Line(',line,' ) = {',p2,',',p3,' };'
      gpline2=line
     
886c558b   Steve Greedy   SACAMOS Public Re...
907
908
909
910
911
912
913
914
915
916
917
918
919
920
    end if
    
  end do ! next shape

! write the number of boundary segments to the boundary file
  write(boundary_file_unit,*)line,'    # number of boundary segments'
  
! Create the closed boundary line loops for each shape, these are constructed from the preciously defined line segments.

  write(gmsh_geometry_file_unit,*)' '

  line_loop=0      ! initialise line_loop counter 
  line=0           ! reset the line counter to the first line
  do i=1,n_shapes
44c11f06   Chris Smartt   Include software ...
921
922
          
    if ( (shape_type(i).EQ.circle) ) then
886c558b   Steve Greedy   SACAMOS Public Re...
923
      
44c11f06   Chris Smartt   Include software ...
924
925
      line_loop=line_loop+1  
      loop_number(i)=line_loop
886c558b   Steve Greedy   SACAMOS Public Re...
926
927
928
929
930
931
932
      
      write(gmsh_geometry_file_unit,*)'Line Loop(',line_loop,' ) = {',line+1,',',line+2,',',line+3,',',line+4,' };'  
      
! write the boundary segment and the boundary number to the boundary file
      do ii=1,4
        write(boundary_file_unit,*)line+ii,i,'  # boundary segment number and boundary number'
      end do
44c11f06   Chris Smartt   Include software ...
933
     
886c558b   Steve Greedy   SACAMOS Public Re...
934
      line=line+4
44c11f06   Chris Smartt   Include software ...
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
          
    else if ( shape_type(i).EQ.rectangle ) then
      
      line_loop=line_loop+1  
      loop_number(i)=line_loop
      
      write(gmsh_geometry_file_unit,*)'Line Loop(',line_loop,' ) = {',line+1,',',line+2,',',line+3,',',line+4,',',     &
                                                                      line+5,',',line+6,',',line+7,',',line+8,' };'  
      
! write the boundary segment and the boundary number to the boundary file
      do ii=1,8
        write(boundary_file_unit,*)line+ii,i,'  # boundary segment number and boundary number'
      end do
     
      line=line+8
      
    else if (shape_type(i).EQ.semicircle) then
    
! this is the outer boundary with infinite ground plane.
! the line loop consists of 4 lines, 2 for the semicircle and 2 for the ground plane

      line_loop=line_loop+1  
      loop_number(i)=line_loop
      
      write(gmsh_geometry_file_unit,*)'Line Loop(',line_loop,' ) = {',line+1,',',line+2,',',gpline1,',',gpline2,' };' 
      
! write the boundary segment and the boundary number to the boundary file
      do ii=1,2
        write(boundary_file_unit,*)line+ii,i,'  # boundary segment number and boundary number'
      end do
      
      line=line+2
886c558b   Steve Greedy   SACAMOS Public Re...
967
968
969
      
    else if (shape_type(i).EQ.Dshape) then  
        
44c11f06   Chris Smartt   Include software ...
970
971
972
      line_loop=line_loop+1  
      loop_number(i)=line_loop

886c558b   Steve Greedy   SACAMOS Public Re...
973
974
975
976
977
978
979
980
981
      write(gmsh_geometry_file_unit,*)'Line Loop(',line_loop,' ) = {',line+1,',',line+2,',',line+3,',',line+4,',',     &
                                                                      line+5,',',line+6,',',line+7,',',line+8,' };'  
      
! write the boundary segment and the boundary number to the boundary file
      do ii=1,8
        write(boundary_file_unit,*)line+ii,i,'  # boundary segment number and boundary number'
      end do
      
      line=line+8
44c11f06   Chris Smartt   Include software ...
982
983
984
985
986
987
988
989
990
991
992
993

      
    else if (shape_type(i).EQ.semicircle_diameter) then  
! note there is no line loop for the semicircle_diameter shape as this is dealt with along with the semicircle
! just skip these lines
      
! write the boundary segment and the boundary number to the boundary file
      do ii=1,2
        write(boundary_file_unit,*)line+ii,i,'  # boundary segment number and boundary number'
      end do
              
      line=line+2
886c558b   Steve Greedy   SACAMOS Public Re...
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
        
    end if
        
  end do ! next shape
  
! Create the plane Surfaces, one for each dielectric region. Surfaces are defined by their boundling line loops
! Note that the order of the line loop specification is important for the orientation of the elements in the mesh

  write(gmsh_geometry_file_unit,*)' '

  surface=0     ! initialise surface counter 

! loop over the dielectric regions (including free space) as each one contributes a surface to be meshed.
44c11f06   Chris Smartt   Include software ...
1007

886c558b   Steve Greedy   SACAMOS Public Re...
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
  do dielectric_region=0,n_dielectric_regions   ! 0 is the free space region which always exists

    surface=surface+1
    
    string1='  Plane Surface('
    CALL add_integer_to_string(string1,surface,string2)
    string1=trim(string2)//') = {'

! for this surface, write a list of all the line loops bounding the surface
! in order to construct this list we loop over all shapes (line loops) 
! and check whether the inside or outside region of the line loop is associated with the current region
  
    if (surface.eq.1) then    
! order the line loops for the free space region outer boundary first

      if (overshield) then
! The overshield reference conductor should be the last conductor

        i=PUL%n_conductors
44c11f06   Chris Smartt   Include software ...
1027
        line_loop=loop_number(i)
886c558b   Steve Greedy   SACAMOS Public Re...
1028
1029
        if( (shape_to_region(i,inside).EQ.dielectric_region).OR. &
            (shape_to_region(i,outside).EQ.dielectric_region) )    then         
44c11f06   Chris Smartt   Include software ...
1030
          CALL add_integer_to_string(string1,line_loop,string2)
886c558b   Steve Greedy   SACAMOS Public Re...
1031
1032
1033
1034
          string1=trim(string2)//', '        
        end if    
        
      end if ! overshield
44c11f06   Chris Smartt   Include software ...
1035
1036
1037
      
      do i=1,n_shapes      ! don't include ground plane in check
        line_loop=loop_number(i)
886c558b   Steve Greedy   SACAMOS Public Re...
1038
1039
        if ((.NOT.overshield).OR.(i.NE.PUL%n_conductors)) then
          if( (shape_to_region(i,inside).EQ.dielectric_region).OR. &
44c11f06   Chris Smartt   Include software ...
1040
1041
1042
1043
1044
              (shape_to_region(i,outside).EQ.dielectric_region) )    then       
            if (line_loop.GT.0) then  
              CALL add_integer_to_string(string1,line_loop,string2)
              string1=trim(string2)//', '   
            end if     
886c558b   Steve Greedy   SACAMOS Public Re...
1045
1046
          end if          
        end if          
44c11f06   Chris Smartt   Include software ...
1047
      end do  ! next shape      
886c558b   Steve Greedy   SACAMOS Public Re...
1048
      
44c11f06   Chris Smartt   Include software ...
1049
    else ! not the fisrt surface
886c558b   Steve Greedy   SACAMOS Public Re...
1050
1051
1052
! dielectric boundaries are defined second so reverse the order of the loop for dielectric regions

      do i=n_shapes,1,-1
44c11f06   Chris Smartt   Include software ...
1053
        line_loop=loop_number(i)
886c558b   Steve Greedy   SACAMOS Public Re...
1054
        if( (shape_to_region(i,inside).EQ.dielectric_region).OR. &
44c11f06   Chris Smartt   Include software ...
1055
1056
1057
1058
1059
            (shape_to_region(i,outside).EQ.dielectric_region) )    then   
          if (line_loop.GT.0) then  
            CALL add_integer_to_string(string1,line_loop,string2)
            string1=trim(string2)//', '   
          end if                                 
886c558b   Steve Greedy   SACAMOS Public Re...
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
        end if          
      end do
   
    end if

    string1=trim(string2)//'} '
    write(gmsh_geometry_file_unit,'(A,A)')trim(string1),' ;'

  end do ! next region (surface) to mesh

  write(gmsh_geometry_file_unit,*)' '

! Close the file for the gmsh input data
  close(gmsh_geometry_file_unit)
  if (verbose) write(*,*)'Closed file:',trim(geom_filename)

! close the boundary information file
  close(unit=boundary_file_unit)
  if (verbose) write(*,*)'Closed file:',boundary_file_name
  
! Dealllocate the local shape geometry data.
  
  if (allocated( shape_type ))  DEALLOCATE( shape_type )
44c11f06   Chris Smartt   Include software ...
1083
  if (allocated( loop_number ))  DEALLOCATE( loop_number )
886c558b   Steve Greedy   SACAMOS Public Re...
1084
1085
1086
1087
1088
1089
  if (allocated( x ))  DEALLOCATE( x )
  if (allocated( y ))  DEALLOCATE( y )
  if (allocated( r ))  DEALLOCATE( r )
  if (allocated( rw ))  DEALLOCATE( rw )
  if (allocated( rw2 ))  DEALLOCATE( rw2 )
  if (allocated( rh ))  DEALLOCATE( rh )
44c11f06   Chris Smartt   Include software ...
1090
1091
  if (allocated( rox ))  DEALLOCATE( rox )
  if (allocated( roy ))  DEALLOCATE( roy )
886c558b   Steve Greedy   SACAMOS Public Re...
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
  if (allocated( rtheta ))  DEALLOCATE( rtheta )
  if (allocated( dl )) DEALLOCATE( dl )
  if (allocated( shape_to_region )) DEALLOCATE( shape_to_region )

! STAGE 4: Call the mesh generator, gmsh

  temp_string=trim(name)//'_mesh_domain_'
  CALL add_integer_to_string(temp_string,domain,mesh_filename)
  mesh_filename=trim(mesh_filename)//mesh_file_extn
  
  write(*,*)'CALLING gmsh for domain',domain
  command='gmsh -2 -o '//trim(mesh_filename)//' '//trim(geom_filename)
  CALL execute_command_line(command,EXITSTAT=gmsh_exit_stat)
  
! Check that the mesh generator finished correctly, if not exit and write the gmsh error code to the screen
  if (gmsh_exit_stat.NE.0) then
  
! gmsh returned with a non zdero exit code indicating an error
    write(run_status,*)'ERROR in PUL_LC_Laplace. gmsh exit status=',gmsh_exit_stat
    CALL write_program_status()
    STOP 1

  end if
  
! STAGE 5: Call Laplace to calculate the L,C and G matrices, using the mesh that we have just generated

! Work out the dimension of the per-unit-length matrices  

  matrix_dimension=PUL%n_conductors-1
  
  if (verbose) then
    write(*,*)'Number of conductors=',PUL%n_conductors
    write(*,*)'matrix dimension=',matrix_dimension
  end if
  
! check we have a valid system
  if (matrix_dimension.LT.1) then
    run_status='ERROR in PUL_LC_Laplace, Matrix dimension is less than 1 '
    CALL write_program_status()
    STOP 1
  end if
  
! work out if we have any frequency dependent dielectric
  frequency_dependent_dielectric=.FALSE.
  dielectric_region=0
  
  if ( (PUL%epsr_background%a%order.GT.0).OR. (PUL%epsr_background%b%order.GT.0) ) then
    frequency_dependent_dielectric=.TRUE.
  end if
      
! check the external dielectric first

  do i=1,end_conductor_loop    ! don't include the ground plane in the conductor loop for the dielectric region count
  
    write(*,*)'Check dielectric loop',i,' conductor has dielectric:',conductor_has_dielectric(i)
  
    if (conductor_has_dielectric(i)) then
    
      write(*,*)'aorder,border',PUL%epsr(i)%a%order,PUL%epsr(i)%b%order
    
      if ( (PUL%epsr(i)%a%order.GT.0).OR. (PUL%epsr(i)%b%order.GT.0) ) then
        frequency_dependent_dielectric=.TRUE.
      end if
      
    end if
  end do    ! next conductor
  
  if (verbose) write(*,*)'Frequency dependent dielectric:',frequency_dependent_dielectric
  
! Check for special case which is not currently used but could happen in future developments maybe...
  if ( (frequency_dependent_dielectric).AND.(n_dielectric_regions.EQ.0) ) then
    run_status='Error in PUL_LC_Laplace. Conductors are situated in a homogeneous frequency dependent dielectric'
    CALL write_program_status()
    STOP 1
  end if

! Allocate the per-unit-length matrices  
  PUL%L%dim=matrix_dimension
  ALLOCATE( PUL%L%mat(1:PUL%L%dim,1:PUL%L%dim) )
  PUL%C%dim=matrix_dimension
  ALLOCATE( PUL%C%mat(1:PUL%C%dim,1:PUL%C%dim) )
  PUL%G%dim=matrix_dimension
  ALLOCATE( PUL%G%mat(1:PUL%G%dim,1:PUL%G%dim) )

! Allocate the impedance and admittance filter matrices  
  PUL%Zfilter%dim=matrix_dimension
  ALLOCATE(PUL%Zfilter%sfilter_mat(1:PUL%Zfilter%dim,1:PUL%Zfilter%dim))
  PUL%Yfilter%dim=matrix_dimension
  ALLOCATE(PUL%Yfilter%sfilter_mat(1:PUL%Yfilter%dim,1:PUL%Yfilter%dim))

  if (verbose) write(*,*)'CALLING: Laplace'
  
  if (n_dielectric_regions.EQ.0) then
! no dielectrics so we can calculate L, C and G in the same solution

    f=1D0   ! arbitrary frequency here for lossless dielectric but a frequency must be set. The value will have no effect in this case.
    CALL Laplace(mesh_filename,matrix_dimension,first_surface_is_free_space_boundary,  &
                 n_dielectric_regions,dielectric_region_epsr,f,PUL%L%mat,PUL%C%mat,PUL%G%mat,xc,yc)

! calculate the impedance and admittance filters for a frequency independent model

    CALL Z_Y_from_L_C(PUL%L,PUL%C,PUL%Zfilter,PUL%Yfilter)
                 
  else
  
! there are dielectrics present

    ALLOCATE( mat1%mat(1:matrix_dimension,1:matrix_dimension) )
    mat1%dim=matrix_dimension
    ALLOCATE( mat2%mat(1:matrix_dimension,1:matrix_dimension) )
    mat2%dim=matrix_dimension
    
! Firstly solve using the 'high frequency' dielectric material properties

    dielectric_region=0
    do i=1,end_conductor_loop    ! don't include the ground plane in the dielectric region count
      if (conductor_has_dielectric(i)) then
        dielectric_region=dielectric_region+1         
        dielectric_region_epsr(dielectric_region)=evaluate_Sfilter_high_frequency_limit(PUL%epsr(i))
      end if
    end do    ! next conductor
    
! call first with the dielectric materials and solve for C and G first
    f=1D0   ! arbitrary frequency here for lossless dielectric 
    CALL Laplace(mesh_filename,matrix_dimension,first_surface_is_free_space_boundary,  &
                 n_dielectric_regions,dielectric_region_epsr,f,mat1%mat,PUL%C%mat,PUL%G%mat,xc,yc)
                 
! call second with all materials set to free space properties and solve for L

    dielectric_region_epsr(:)=(1d0,0d0)
    
    f=1D0   ! arbitrary frequency here for lossless dielectric 
    CALL Laplace(mesh_filename,matrix_dimension,first_surface_is_free_space_boundary,  &
                 n_dielectric_regions,dielectric_region_epsr,f,PUL%L%mat,mat1%mat,mat2%mat,xc,yc)
                 
    if ((.NOT.frequency_dependent_dielectric).OR.(freq_spec%n_frequencies.EQ.1)) then             
    
 ! calculate the impedance and admittance filters

      CALL Z_Y_from_L_C(PUL%L,PUL%C,PUL%Zfilter,PUL%Yfilter)
     
    else

! There are frequency dependent dielectrics present             
! Secondly we calculate the capacitance matrix at a number of frequencies before fitting filter functions
! to each of the frequency dependent admittance matrix entries.
    
! allocate the frequency dependent matrices
      ALLOCATE( C_freq(1:freq_spec%n_frequencies) )
      ALLOCATE( G_freq(1:freq_spec%n_frequencies) )

! loop over frequency    
      do floop=1,freq_spec%n_frequencies

! allocate the matrices for this frequency    
        ALLOCATE( C_freq(floop)%mat(1:matrix_dimension,1:matrix_dimension) )
        C_freq(floop)%dim=matrix_dimension
        ALLOCATE( G_freq(floop)%mat(1:matrix_dimension,1:matrix_dimension) )
        G_freq(floop)%dim=matrix_dimension

! evaluate the complex dielectric constant at the current frequency

        f=freq_spec%freq_list(floop)

! set material properties in region 0, the background region
        dielectric_region=0
        dielectric_region_epsr(dielectric_region)=evaluate_Sfilter_frequency_response(PUL%epsr_background,f)
        
        do i=1,end_conductor_loop    ! don't include the ground plane in the dielectric region count
          if (conductor_has_dielectric(i)) then
            dielectric_region=dielectric_region+1         
            dielectric_region_epsr(dielectric_region)=evaluate_Sfilter_frequency_response(PUL%epsr(i),f)
          end if
        end do    ! next conductor

! solve for C and G matrices at this frequency
       
! call Laplace to solve for C and G at this frequency

        CALL Laplace(mesh_filename,matrix_dimension,first_surface_is_free_space_boundary,  &
                     n_dielectric_regions,dielectric_region_epsr,f,mat1%mat,C_freq(floop)%mat,G_freq(floop)%mat,xc,yc)
                                      
      end do ! next frequency

! we now have frequency domain C and G matrices.

! loop over the elements of C and G and calculate the Y matrix by filter fitting to Y=G(f)+jwC(f), and the Z matrix as jwL  
      ALLOCATE( function_to_fit(1:freq_spec%n_frequencies) )
    
      do row=1,matrix_dimension
        do col=row,matrix_dimension

! get the function values for this matrix element function_to_fit=G+jwC
          do floop=1,freq_spec%n_frequencies
            function_to_fit(floop)=G_freq(floop)%mat(row,col)+              &
                                   j*2d0*pi*freq_spec%freq_list(floop)*C_freq(floop)%mat(row,col)
          end do
        
! calculate the Yfilter matrix using the filter fitting process
! note aorder=border and no restrictions are put on the function

          CALL Calculate_Sfilter(function_to_fit,freq_spec%freq_list,freq_spec%n_frequencies,  &
189467e4   Steve Greedy   First Public Release
1294
                                 PUL%Yfilter%sfilter_mat(row,col),fit_order+1,-1,0) 
886c558b   Steve Greedy   SACAMOS Public Re...
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347

! calcualte the Zfilter matrix as jwL
          PUL%Zfilter%sfilter_mat(row,col)=jwA_filter( PUL%L%mat(row,col) )
        
          if (col.NE.row) then
        
! make the matrix symmetrical
            PUL%Zfilter%sfilter_mat(col,row)=PUL%Zfilter%sfilter_mat(row,col)
            PUL%Yfilter%sfilter_mat(col,row)=PUL%Yfilter%sfilter_mat(row,col)

          end if
        
        end do ! next col
      
      end do ! next row
    
      DEALLOCATE( function_to_fit )

! deallocate the temporary matrices associated with the frequency dependent C and G matrices  
      do floop=1,freq_spec%n_frequencies

! allocate the matrices for this frequency    
        DEALLOCATE( C_freq(floop)%mat )
        DEALLOCATE( G_freq(floop)%mat )
      
      end do ! next frequency
    
      DEALLOCATE( C_freq )
      DEALLOCATE( G_freq )
    
    end if ! frequency dependent dielectric
                 
    DEALLOCATE( mat1%mat )
    DEALLOCATE( mat2%mat )  
    
  end if ! any dielectrics
    
  if (verbose) then
    write(*,*)'FINISHED: Laplace'
    write(*,*)'Inductance matrix, L'
    CALL dwrite_matrix(PUL%L%mat,matrix_dimension,matrix_dimension,matrix_dimension,0)
    write(*,*)'Capacitance matrix, C'
    CALL dwrite_matrix(PUL%C%mat,matrix_dimension,matrix_dimension,matrix_dimension,0)
    write(*,*)'Conductance matrix, G'
    CALL dwrite_matrix(PUL%G%mat,matrix_dimension,matrix_dimension,matrix_dimension,0)

  end if
  
  if (allocated( dielectric_region_epsr )) DEALLOCATE( dielectric_region_epsr )

  if (verbose) write(*,*)'FINISHED PUL_LC_Laplace'

END SUBROUTINE PUL_LC_Laplace