Blame view

SRC/CABLE_BUNDLE_MODULES/cable_bundle_module.F90 40.1 KB
886c558b   Steve Greedy   SACAMOS Public Re...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
!
! This file is part of SACAMOS, State of the Art CAble MOdels in Spice. 
! It was developed by the University of Nottingham and the Netherlands Aerospace 
! Centre (NLR) for ESA under contract number 4000112765/14/NL/HK.
! 
! Copyright (C) 2016-2017 University of Nottingham
! 
! SACAMOS is free software: you can redistribute it and/or modify it under the 
! terms of the GNU General Public License as published by the Free Software 
! Foundation, either version 3 of the License, or (at your option) any later 
! version.
! 
! SACAMOS is distributed in the hope that it will be useful, but 
! WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 
! or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License 
! for more details.
! 
! A copy of the GNU General Public License version 3 can be found in the 
! file GNU_GPL_v3 in the root or at <http://www.gnu.org/licenses/>.
! 
! SACAMOS uses the EISPACK library (in /SRC/EISPACK). EISPACK is subject to 
! the GNU Lesser General Public License. A copy of the GNU Lesser General Public 
! License version can be found in the file GNU_LGPL in the root of EISPACK 
! (/SRC/EISPACK ) or at <http://www.gnu.org/licenses/>.
! 
! The University of Nottingham can be contacted at: ggiemr@nottingham.ac.uk
!
! File Contents:
! MODULE cable_bundle_module
!   CONTAINS
!     SUBROUTINE read_cable_bundle
!     SUBROUTINE write_cable_bundle
!     SUBROUTINE deallocate_cable_bundle
!     SUBROUTINE check_cables_wrt_ground_plane
!     SUBROUTINE check_cable_intersections
!
! NAME
!     MODULE cable_bundle_module
!
!     Data strunctures and subroutines relating to cable bundles
!     
! COMMENTS
!     Need to improve error handling in file reading 
!  Not sure that some arrays in the type_specification need to be in this structure as they are only used in one subroutine...    
!
! HISTORY
!    started 25/11/2015 CJS
!    stage 3 developments started 21/3/2015 CJS
!    generalise conductor impedance for transfer impedance model (stage 5) CJS 12/5/2016
!    CJS 25/08/2016   updates for revised transfer impedance and conductor impedance model for shields
189467e4   Steve Greedy   First Public Release
51
!     16/11/2017 CJS Include network synthesis process to replace s-domain transfer functions
886c558b   Steve Greedy   SACAMOS Public Re...
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
!
MODULE cable_bundle_module

USE type_specifications
USE cable_module

IMPLICIT NONE

! This is a general structure used to hold conductor based lists, 

TYPE::conductor_list_type

  integer             :: n_elements
  integer,allocatable :: element(:)

END TYPE conductor_list_type

! This is the main structure used to hold all the bundle information

TYPE::bundle_specification_type 

  character(LEN=line_length)    :: version 
  character(LEN=line_length)    :: bundle_name
  
  integer            :: tot_n_conductors
  integer            :: tot_n_shielded_conductors
  integer            :: tot_n_external_conductors
  
! dimension of the global matrix system (total number of conductors-1)
  integer            :: system_dimension

! cable information, total number of cables including and excluding the ground plane (if it exists)
  integer            :: n_cables
  integer            :: n_cables_without_ground_plane
  
! Array of cable specification data for all the cables in this bundle
  type(cable_specification_type),allocatable    :: cable(:)
  
! list of cable positions in the bundle cross section and rotation angles
  real(dp),allocatable        :: cable_x_offset(:)
  real(dp),allocatable        :: cable_y_offset(:)
  real(dp),allocatable        :: cable_angle(:)
  
! ground plane information: note we have two notations at the moment. 
! This will need to be sorted out and one only adopted

  logical             :: ground_plane_present
  
  real(dp)            :: ground_plane_angle
  real(dp)            :: ground_plane_offset
  
  real(dp)            :: ground_plane_x,ground_plane_y,ground_plane_theta
  real(dp)            :: ground_plane_nx,ground_plane_ny
  
  integer             :: ground_plane_cable_side    ! +1 if the cables are on the normal direction side of the ground plane, -1 otherwise

! domain based information  
  integer             :: tot_n_domains

  integer,allocatable :: n_conductors(:)  ! number of conductors in each domain
  
  type(conductor_list_type),allocatable  :: terminal_conductor_list(:) ! external conductor number for coonductors in each domain
  
  type(matrix),allocatable        :: L(:)  ! 'high frequency' inductance matrix for each domain
  type(matrix),allocatable        :: C(:)  ! 'high frequency' capacitance matrix for each domain
  
  type(Sfilter_matrix),allocatable    :: Z(:)  ! frequency dependent impedance matrix for each domain
  type(Sfilter_matrix),allocatable    :: Y(:)  ! frequency dependent admittance matrix for each domain
  
! global conductor based information  
  type(matrix)        :: global_MI     ! global domain current transformation matrix
  type(matrix)        :: global_MV     ! global domain voltage transformation matrix
  
  type(matrix)        :: global_L       ! global 'high frequency' inductance matrix 
  type(matrix)        :: global_C       ! global 'high frequency' capacitance matrix
  
  type(Sfilter_matrix)    :: global_Z    ! global frequency dependent impedance matrix 
  type(Sfilter_matrix)    :: global_Y    ! global frequency dependent admittance matrix

! global conductor impedance model information for each conductor
  type(conductor_impedance_model),allocatable    :: conductor_impedance(:)
  
! global conductor position in the bundle cross-section
  real(dp),allocatable        :: conductor_x_offset(:)
  real(dp),allocatable        :: conductor_y_offset(:)

! arrays for cross referecing numbering information from the global (external) conductor numbering and the domain based numbering systems
  logical,allocatable :: terminal_conductor_is_shield_flag(:)
  integer,allocatable :: terminal_conductor_to_inner_domain(:)
  integer,allocatable :: terminal_conductor_to_outer_domain(:)
  integer,allocatable :: terminal_conductor_to_global_domain_conductor(:)
  integer,allocatable :: terminal_conductor_to_local_domain_conductor(:)
  integer,allocatable :: terminal_conductor_to_reference_terminal_conductor(:)
  
! Y matrix element function fitting information for frequency dependent dielectrics

! model order for filter fitting
  integer    :: Y_fit_model_order
      
! frequency range specification 
  type(frequency_specification) :: Y_fit_freq_spec
189467e4   Steve Greedy   First Public Release
153
154
  
  character(LEN=line_length),allocatable   :: conductor_label(:)
886c558b   Steve Greedy   SACAMOS Public Re...
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
    
END TYPE bundle_specification_type

CONTAINS

! The following subroutines apply to all bundles and cable types

! NAME
!     SUBROUTINE read_cable_bundle(unit)
!
!     read cable bundle structure from a specified unit
!     
! COMMENTS
!     
!
! HISTORY
!    started 2/12/2015 CJS
!    stage 3 developments started 21/3/2015 CJS
!    generalise conductor impedance for transfer impedance model (stage 5) CJS 12/5/2016
!

  SUBROUTINE read_cable_bundle(bundle,file_unit)

  USE type_specifications
  USE constants
  USE general_module
  USE cable_module
  USE maths

  IMPLICIT NONE

! variables passed to subroutine

  type(bundle_specification_type),intent(INOUT) :: bundle
  integer ,intent(IN)                           :: file_unit
  
! local variables
    
  character(len=filename_length)    :: filename
  logical                :: file_exists
  character(len=line_length)        :: line

  integer                :: cable
  integer                :: n_domains
  integer                :: domain
  integer                :: matrix_dimension
  integer                :: n_conductors
  integer                :: conductor
  
  integer                :: ierr

! START

! Open the (.bundle) file to read

  filename=trim(MOD_bundle_lib_dir)//trim(bundle%bundle_name)//bundle_file_extn

  inquire(file=trim(filename),exist=file_exists)
  if (.NOT.file_exists) then
    run_status='ERROR, Cannot find the required bundle file:'//trim(filename)
    CALL write_program_status()
    STOP 1
  end if 
  open(unit=file_unit,file=trim(filename))

  if (verbose) write(*,*)'Opened file:',trim(filename)

! read .bundle file
  read(file_unit,'(A)',ERR=9000)bundle%version
  read(file_unit,'(A)',ERR=9000)bundle%bundle_name
  
! read cable information
  read(file_unit,*,ERR=9000)bundle%n_cables_without_ground_plane
  read(file_unit,*,ERR=9000)bundle%n_cables
  
! allocate and read cable information and cable positions in bundle 
  ALLOCATE( bundle%cable(1:bundle%n_cables) )
  ALLOCATE( bundle%cable_x_offset(1:bundle%n_cables) )
  ALLOCATE( bundle%cable_y_offset(1:bundle%n_cables) )
  ALLOCATE( bundle%cable_angle(1:bundle%n_cables) )

  do cable=1,bundle%n_cables_without_ground_plane
    read(file_unit,'(A)')bundle%cable(cable)%cable_name
    CALL read_cable(bundle%cable(cable),cable_file_unit)
    read(file_unit,*,ERR=9000)bundle%cable_x_offset(cable),bundle%cable_y_offset(cable),bundle%cable_angle(cable)
! convert angle to radians
    bundle%cable_angle(cable)=bundle%cable_angle(cable)*pi/180d0
  end do ! next cable
  
! read ground plane specification

  read(file_unit,'(A)',IOSTAT=ierr)line
    if (ierr.NE.0) then 
      run_status='ERROR reading ground plane present/ absent information'
      CALL write_program_status()
      STOP 1
    end if 
  CALL convert_to_lower_case(line,line_length)
  
  bundle%ground_plane_present=(line.eq.'ground_plane')
  
  if (bundle%ground_plane_present) then
  
    read(file_unit,*,IOSTAT=ierr)bundle%ground_plane_x,bundle%ground_plane_y,bundle%ground_plane_angle
    read(file_unit,*,IOSTAT=ierr)bundle%ground_plane_nx,bundle%ground_plane_ny
    read(file_unit,*,IOSTAT=ierr)bundle%ground_plane_cable_side
    
    if (ierr.NE.0) then 
      run_status='ERROR reading ground plane position and angle'
      CALL write_program_status()
      STOP 1
    end if 
! convert ground plane angle to radians
    bundle%ground_plane_angle=bundle%ground_plane_angle*pi/180d0
! calculate offset
    bundle%ground_plane_offset=-bundle%ground_plane_x*sin(bundle%ground_plane_angle)+  &
                                bundle%ground_plane_y*cos(bundle%ground_plane_angle)
                                
! set the geometric data for the last cable in the list i.e. the ground plane

    cable=bundle%n_cables
    bundle%cable_x_offset(cable)=bundle%ground_plane_x
    bundle%cable_y_offset(cable)=bundle%ground_plane_y
    bundle%cable_angle(cable)=bundle%ground_plane_angle-pi/2d0  ! note there are two ground plane spec formats at the moment...
 
  else
! set x, y, angle and offset to 0
    bundle%ground_plane_x=0d0
    bundle%ground_plane_y=0d0
    bundle%ground_plane_nx=0d0
    bundle%ground_plane_ny=0d0
    bundle%ground_plane_cable_side=0
    bundle%ground_plane_angle=0d0
    bundle%ground_plane_offset=0d0
  end if
  
! read system dimension information
  read(file_unit,*)bundle%tot_n_conductors
  read(file_unit,*)bundle%tot_n_external_conductors
  read(file_unit,*)bundle%system_dimension
  
! read domain information
  read(file_unit,*,ERR=9000)bundle%tot_n_domains
     
  ALLOCATE( bundle%n_conductors(1:bundle%tot_n_domains) ) 
  
  ALLOCATE( bundle%L(1:bundle%tot_n_domains) ) 
  ALLOCATE( bundle%C(1:bundle%tot_n_domains) )
  ALLOCATE( bundle%Z(1:bundle%tot_n_domains))
  ALLOCATE( bundle%Y(1:bundle%tot_n_domains))
  
  ALLOCATE( bundle%terminal_conductor_list(1:bundle%tot_n_domains))

  n_domains=bundle%tot_n_domains

  do domain=1,bundle%tot_n_domains
  
    read(file_unit,*,ERR=9000)   ! comment line
    
    read(file_unit,*)bundle%n_conductors(domain)
    
    read(file_unit,*,ERR=9000)  ! comment line
    read(file_unit,*,ERR=9000)bundle%terminal_conductor_list(domain)%n_elements    
    ALLOCATE( bundle%terminal_conductor_list(domain)%element(1:bundle%terminal_conductor_list(domain)%n_elements) )
    do conductor=1,bundle%terminal_conductor_list(domain)%n_elements
      read(file_unit,*,ERR=9000)bundle%terminal_conductor_list(domain)%element(conductor)
    end do
        
    read(file_unit,*,ERR=9000)   ! comment line
    
    read(file_unit,*)matrix_dimension
    bundle%L(domain)%dim=matrix_dimension
    ALLOCATE( bundle%L(domain)%mat(1:matrix_dimension,1:matrix_dimension) ) 
    CALL dread_matrix(bundle%L(domain)%mat,matrix_dimension,matrix_dimension,matrix_dimension,file_unit)

    write(*,*)'L='
    CALL dwrite_matrix(bundle%L(domain)%mat,matrix_dimension,matrix_dimension,matrix_dimension,0) ! ******
    
    read(file_unit,*,ERR=9000)   ! comment line
    read(file_unit,*)matrix_dimension
    bundle%C(domain)%dim=matrix_dimension
    ALLOCATE( bundle%C(domain)%mat(1:matrix_dimension,1:matrix_dimension) ) 
    CALL dread_matrix(bundle%C(domain)%mat,matrix_dimension,matrix_dimension,matrix_dimension,file_unit)

    write(*,*)'C='
    CALL dwrite_matrix(bundle%C(domain)%mat,matrix_dimension,matrix_dimension,matrix_dimension,0) ! ******

    read(file_unit,*,ERR=9000) ! comment line 
    CALL read_Sfilter_matrix( bundle%Z(domain),file_unit )
      
    read(file_unit,*,ERR=9000) ! comment line 
    CALL read_Sfilter_matrix( bundle%Y(domain),file_unit )

  end do
  
  read(file_unit,*,ERR=9000)    ! comment line
  read(file_unit,*)matrix_dimension
  bundle%global_MI%dim=matrix_dimension
  ALLOCATE( bundle%global_MI%mat(1:matrix_dimension,1:matrix_dimension) ) 
  CALL dread_matrix(bundle%global_MI%mat,matrix_dimension,matrix_dimension,matrix_dimension,file_unit)
  
  read(file_unit,*,ERR=9000)    ! comment line
  read(file_unit,*)matrix_dimension
  bundle%global_MV%dim=matrix_dimension
  ALLOCATE( bundle%global_MV%mat(1:matrix_dimension,1:matrix_dimension) ) 
  CALL dread_matrix(bundle%global_MV%mat,matrix_dimension,matrix_dimension,matrix_dimension,file_unit)
  
  read(file_unit,*,ERR=9000)    ! comment line
  read(file_unit,*)matrix_dimension
  bundle%global_L%dim=matrix_dimension
  ALLOCATE( bundle%global_L%mat(1:matrix_dimension,1:matrix_dimension) ) 
  CALL dread_matrix(bundle%global_L%mat,matrix_dimension,matrix_dimension,matrix_dimension,file_unit)
  
  read(file_unit,*,ERR=9000)    ! comment line
  read(file_unit,*)matrix_dimension
  bundle%global_C%dim=matrix_dimension
  ALLOCATE( bundle%global_C%mat(1:matrix_dimension,1:matrix_dimension) ) 
  CALL dread_matrix(bundle%global_C%mat,matrix_dimension,matrix_dimension,matrix_dimension,file_unit)

  read(file_unit,*,ERR=9000) ! comment line 
  CALL read_Sfilter_matrix( bundle%global_Z,file_unit )
    
  read(file_unit,*,ERR=9000) ! comment line 
  CALL read_Sfilter_matrix( bundle%global_Y,file_unit )
  
! read the loss model information for each conductor

  ALLOCATE( bundle%conductor_impedance(1:bundle%tot_n_conductors) )
  
  read(file_unit,*)  ! comment line
  do conductor=1,bundle%tot_n_conductors
    CALL read_conductor_impedance_model(bundle%conductor_impedance(conductor),file_unit)
  end do
  
! read the x and y position for each conductor: this is needed for incident field excitation

  ALLOCATE( bundle%conductor_x_offset(1:bundle%tot_n_conductors) )
  ALLOCATE( bundle%conductor_y_offset(1:bundle%tot_n_conductors) )

  read(file_unit,*)  ! comment line
  do conductor=1,bundle%tot_n_conductors
    read(file_unit,*)bundle%conductor_x_offset(conductor),bundle%conductor_y_offset(conductor)
  end do
  
 ! numbering information
  read(file_unit,*)  ! comment line
  
  ALLOCATE( bundle%terminal_conductor_is_shield_flag(1:bundle%tot_n_conductors) )
  ALLOCATE( bundle%terminal_conductor_to_inner_domain(1:bundle%tot_n_conductors) )
  ALLOCATE( bundle%terminal_conductor_to_outer_domain(1:bundle%tot_n_conductors) )
  ALLOCATE( bundle%terminal_conductor_to_global_domain_conductor(1:bundle%tot_n_conductors) )
  ALLOCATE( bundle%terminal_conductor_to_local_domain_conductor(1:bundle%tot_n_conductors) )
  ALLOCATE( bundle%terminal_conductor_to_reference_terminal_conductor(1:bundle%tot_n_conductors) )
  
  do conductor=1,bundle%tot_n_conductors
  
    read(file_unit,*)bundle%terminal_conductor_is_shield_flag(conductor),      &
                     bundle%terminal_conductor_to_inner_domain(conductor),     &
                     bundle%terminal_conductor_to_outer_domain(conductor),     &
                     bundle%terminal_conductor_to_global_domain_conductor(conductor), &
                     bundle%terminal_conductor_to_local_domain_conductor(conductor), &
                     bundle%terminal_conductor_to_reference_terminal_conductor(conductor)
  end do
189467e4   Steve Greedy   First Public Release
418
419
420
421
422
423
424
  
! read the conductor labels
  ALLOCATE( bundle%conductor_label(1:bundle%tot_n_conductors) )
  read(file_unit,*)  ! comment line
  do conductor=1,bundle%tot_n_conductors
    read(file_unit,'(A)')bundle%conductor_label(conductor)
  end do
886c558b   Steve Greedy   SACAMOS Public Re...
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600

! close .bundle file

  CLOSE(unit=file_unit)

  if (verbose) write(*,*)'Closed file:',trim(filename)

  RETURN
  
9000  run_status='ERROR reading the bundle file:'//trim(filename)
      CALL write_program_status()
      STOP 1
  
  END SUBROUTINE read_cable_bundle

! NAME
!     SUBROUTINE write_cable_bundle
!
!     write the cable bundle structure to a specified unit
!     
! COMMENTS
!    
!
! HISTORY
!    started 2/12/2015 CJS
!    stage 3 developments started 21/3/2015 CJS
!    generalise conductor impedance for transfer impedance model (stage 5) CJS 12/5/2016
!

  SUBROUTINE write_cable_bundle(bundle,file_unit)

  USE type_specifications
  USE constants
  USE general_module
  USE cable_module
  USE maths

  IMPLICIT NONE

! variables passed to subroutine

  type(bundle_specification_type),intent(INOUT) :: bundle
  integer,intent(IN)                            :: file_unit
  
! local variables

  character(len=filename_length)    :: filename
  character(len=line_length)        :: line
  integer                :: cable
  integer                :: domain
  integer                :: matrix_dimension
  integer                :: conductor
  integer                :: n_cables_to_write

! START

! Open the output (.bundle) file

  filename=trim(MOD_bundle_lib_dir)//trim(bundle%bundle_name)//bundle_file_extn
  open(unit=file_unit,file=trim(filename))

! write .bundle file
  write(file_unit,'(A)')trim(bundle%version)
  write(file_unit,'(A)')trim(bundle%bundle_name)
  
  write(file_unit,*)bundle%n_cables_without_ground_plane,'  ! number of cables not including ground plane'
  write(file_unit,*)bundle%n_cables,'  ! number of cables, cable name and x y coordinates follow...'

! write cable names and coordinates
  
  do cable=1,bundle%n_cables_without_ground_plane
    write(file_unit,'(A)')trim(bundle%cable(cable)%cable_name)
    write(file_unit,*)bundle%cable_x_offset(cable),bundle%cable_y_offset(cable),    &
                      bundle%cable_angle(cable),' x y coordinates and angle of cable '
  end do ! next cable
   
! write ground plane specification  
  
  if (bundle%ground_plane_present) then
    write(file_unit,'(A)')'ground_plane'
! note: convert angle back to degrees
    write(file_unit,*)bundle%ground_plane_x,bundle%ground_plane_y,bundle%ground_plane_angle*180d0/pi, &
                      ' x y coordinates and angle of ground plane '
    write(file_unit,*)bundle%ground_plane_nx,bundle%ground_plane_ny,' ground plane normal direction'
    write(file_unit,*)bundle%ground_plane_cable_side,' orientation of cables wrt ground plane'
  else
    write(file_unit,'(A)')'no_ground_plane'
  end if  
  
  write(file_unit,*)bundle%tot_n_conductors,'  # total number of conductors'
  write(file_unit,*)bundle%tot_n_external_conductors,'  # total number of external conductors'
  write(file_unit,*)bundle%system_dimension,'  # dimension of the matrix system characterising the MTL propagation'
  
  write(file_unit,*)bundle%tot_n_domains,'  # number of domains'

  do domain=1,bundle%tot_n_domains
  
    write(file_unit,*)'Domain number',domain
    write(file_unit,*)bundle%n_conductors(domain),' number of conductors in this domain'   
    
    write(file_unit,*)'terminal_conductor_list'
    write(file_unit,*)bundle%terminal_conductor_list(domain)%n_elements,' ! number of elements '
    do conductor=1,bundle%terminal_conductor_list(domain)%n_elements
      write(file_unit,*)bundle%terminal_conductor_list(domain)%element(conductor)
    end do
    
    matrix_dimension=bundle%L(domain)%dim
    write(file_unit,*)'Per-Unit-length Inductance Matrix, [L]'
    write(file_unit,*)matrix_dimension,' Dimension of [L]'
    CALL dwrite_matrix(bundle%L(domain)%mat,matrix_dimension,matrix_dimension,matrix_dimension,file_unit)
  
    write(file_unit,*)'Per-Unit-length Capacitance Matrix, [C]'
    write(file_unit,*)matrix_dimension,' Dimension of [C]'
    CALL dwrite_matrix(bundle%C(domain)%mat,matrix_dimension,matrix_dimension,matrix_dimension,file_unit)

    write(file_unit,*)'Per-Unit-length Impedance Matrix, Z'
    CALL write_Sfilter_matrix( bundle%Z(domain),file_unit )
      
    write(file_unit,*)'Per-Unit-length Admittance Matrix, Y'
    CALL write_Sfilter_matrix( bundle%Y(domain),file_unit )

  end do
  
  write(file_unit,*)'# Global current domain transformation matrix, [MI]'
  matrix_dimension=bundle%global_MI%dim-1 
  write(file_unit,*)matrix_dimension,' Dimension of [MI]'
  CALL dwrite_matrix(bundle%global_MI%mat,matrix_dimension,matrix_dimension,bundle%global_MI%dim,file_unit)
  
  write(file_unit,*)'# Global voltage domain transformation matrix, [MV]'
  matrix_dimension=bundle%global_MV%dim-1
  write(file_unit,*)matrix_dimension,' Dimension of [MV]'
  CALL dwrite_matrix(bundle%global_MV%mat,matrix_dimension,matrix_dimension,bundle%global_MI%dim,file_unit)
  
  write(file_unit,*)'# Global domain based inductance matrix, [L]'
  matrix_dimension=bundle%global_L%dim
  write(file_unit,*)matrix_dimension,' Dimension of [L]'
  CALL dwrite_matrix(bundle%global_L%mat,matrix_dimension,matrix_dimension,matrix_dimension,file_unit)
  
  write(file_unit,*)'# Global domain based capacitance matrix, [C]'
  matrix_dimension=bundle%global_C%dim
  write(file_unit,*)matrix_dimension,' Dimension of [C]'
  CALL dwrite_matrix(bundle%global_C%mat,matrix_dimension,matrix_dimension,matrix_dimension,file_unit)
 
  write(file_unit,*)'Global domain based Per-Unit-length Impedance Matrix, Z'
  CALL write_Sfilter_matrix( bundle%global_Z,file_unit )
      
  write(file_unit,*)'Global domain based Per-Unit-length Admittance Matrix, Y'
  CALL write_Sfilter_matrix( bundle%global_Y,file_unit )
  
! write the loss model information for each conductor
  write(file_unit,*)' # conductor impedance models' 
  do conductor=1,bundle%tot_n_conductors
  
    CALL write_conductor_impedance_model(bundle%conductor_impedance(conductor),file_unit)
                      
  end do
  
! write the x and y position for each conductor: this is needed for incident field excitation
  write(file_unit,*)' # conductor x y positions' 
  do conductor=1,bundle%tot_n_conductors
    write(file_unit,*)bundle%conductor_x_offset(conductor),bundle%conductor_y_offset(conductor)
  end do

 ! numbering information
  write(file_unit,'(A)')'is_shield  tc_to_in_domain  tc_to_out_domain  tc_to_gdc    tc_to_ldc    tc_to_ref_tc  ' 

  do conductor=1,bundle%tot_n_conductors
  
    write(file_unit,8000)bundle%terminal_conductor_is_shield_flag(conductor),      &
                         bundle%terminal_conductor_to_inner_domain(conductor),     &
                         bundle%terminal_conductor_to_outer_domain(conductor),     &
                         bundle%terminal_conductor_to_global_domain_conductor(conductor), &
                         bundle%terminal_conductor_to_local_domain_conductor(conductor), &
                         bundle%terminal_conductor_to_reference_terminal_conductor(conductor)
8000 format(L5,5I15)
  end do
189467e4   Steve Greedy   First Public Release
601
602
603
604
605
606
 
! write the conductor labels
  write(file_unit,*)' # Conductor labels' 
  do conductor=1,bundle%tot_n_conductors
    write(file_unit,*)trim(bundle%conductor_label(conductor))
  end do
886c558b   Steve Greedy   SACAMOS Public Re...
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726

! close .bundle file

  CLOSE(unit=file_unit)
  
  RETURN

  END SUBROUTINE write_cable_bundle

! NAME
!     SUBROUTINE deallocate_cable_bundle
!
!     deallocate cable_bundle structure data
!     
! COMMENTS
!     
!
! HISTORY
!    started 2/12/2015 CJS
!    generalise conductor impedance for transfer impedance model (stage 5) CJS 12/5/2016
!

  SUBROUTINE deallocate_cable_bundle(bundle)

  USE type_specifications
  USE general_module
  USE cable_module

  IMPLICIT NONE

! variables passed to subroutine

  type(bundle_specification_type),intent(INOUT)    :: bundle
  
! local variables

  integer    :: cable
  integer    :: domain
  integer    :: conductor

! START

  do cable=1,bundle%n_cables
    CALL deallocate_cable(bundle%cable(cable))
  end do
  
  
  if (allocated(bundle%cable)) DEALLOCATE( bundle%cable )
  if (allocated(bundle%cable_x_offset )) DEALLOCATE( bundle%cable_x_offset )
  if (allocated(bundle%cable_y_offset )) DEALLOCATE( bundle%cable_y_offset )
  if (allocated(bundle%cable_angle ))    DEALLOCATE( bundle%cable_angle )
  
  if (allocated(bundle%n_conductors )) DEALLOCATE( bundle%n_conductors ) 
  
  if (allocated(bundle%terminal_conductor_list )) then  
    do domain=1,bundle%tot_n_domains    
      if (allocated(bundle%terminal_conductor_list(domain)%element )) &
        DEALLOCATE( bundle%terminal_conductor_list(domain)%element )
    end do 
    DEALLOCATE( bundle%terminal_conductor_list ) 
  end if
 
  if (allocated(bundle%L )) then  
    do domain=1,bundle%tot_n_domains    
      if (allocated(bundle%L(domain)%mat )) DEALLOCATE( bundle%L(domain)%mat )
    end do 
    DEALLOCATE( bundle%L ) 
  end if
 
  if (allocated(bundle%C )) then  
    do domain=1,bundle%tot_n_domains    
      if (allocated(bundle%C(domain)%mat )) DEALLOCATE( bundle%C(domain)%mat )
    end do 
    DEALLOCATE( bundle%C ) 
  end if
  
  if (ALLOCATED(bundle%Z)) then  
    do domain=1,bundle%tot_n_domains
      CALL deallocate_Sfilter_matrix( bundle%Z(domain) )
    end do  
    DEALLOCATE(bundle%Z)
  end if
  
  if (ALLOCATED(bundle%Y)) then  
    do domain=1,bundle%tot_n_domains
      CALL deallocate_Sfilter_matrix( bundle%Y(domain) )
    end do  
    DEALLOCATE(bundle%Y)
  end if
   
  if (allocated(bundle%global_MI%mat)) DEALLOCATE( bundle%global_MI%mat )
  if (allocated(bundle%global_MV%mat)) DEALLOCATE( bundle%global_MV%mat )
  
  if (allocated(bundle%global_L%mat)) DEALLOCATE( bundle%global_L%mat )
  if (allocated(bundle%global_C%mat)) DEALLOCATE( bundle%global_C%mat )
  
  CALL deallocate_Sfilter_matrix( bundle%global_Z )
  CALL deallocate_Sfilter_matrix( bundle%global_Y )

  if (ALLOCATED(bundle%conductor_impedance)) then  
    do conductor=1,bundle%tot_n_conductors
      CALL deallocate_conductor_impedance_model(bundle%conductor_impedance(conductor))
    end do
    DEALLOCATE(bundle%conductor_impedance)
  end if
  
  if (ALLOCATED( bundle%conductor_x_offset )) DEALLOCATE( bundle%conductor_x_offset )
  if (ALLOCATED( bundle%conductor_y_offset )) DEALLOCATE( bundle%conductor_y_offset )

! Numbering information required for transfer impedance calculation

  if(ALLOCATED( bundle%terminal_conductor_is_shield_flag ))  DEALLOCATE( bundle%terminal_conductor_is_shield_flag )
  if(ALLOCATED( bundle%terminal_conductor_to_inner_domain )) DEALLOCATE( bundle%terminal_conductor_to_inner_domain )
  if(ALLOCATED( bundle%terminal_conductor_to_outer_domain )) DEALLOCATE( bundle%terminal_conductor_to_outer_domain )
  if(ALLOCATED( bundle%terminal_conductor_to_global_domain_conductor ))  &
    DEALLOCATE( bundle%terminal_conductor_to_global_domain_conductor )
  if(ALLOCATED( bundle%terminal_conductor_to_local_domain_conductor ))  &
    DEALLOCATE( bundle%terminal_conductor_to_local_domain_conductor )
  if(ALLOCATED( bundle%terminal_conductor_to_reference_terminal_conductor )) &
    DEALLOCATE( bundle%terminal_conductor_to_reference_terminal_conductor )
189467e4   Steve Greedy   First Public Release
727
728
729
730
  
  if (ALLOCATED( bundle%conductor_label )) then
    DEALLOCATE(bundle%conductor_label)
  end if
886c558b   Steve Greedy   SACAMOS Public Re...
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894

  RETURN

  END SUBROUTINE deallocate_cable_bundle
!
! NAME
!     SUBROUTINE check_cables_wrt_ground_plane
!
!     check that the cables are all on one side of the ground plane to ensure consistency
!     and indicate which side the cables are on by setting bundle%ground_plane_cable_side
!     
! COMMENTS
!     
!
! HISTORY
!    started 29/06/2016 CJS
!

  SUBROUTINE check_cables_wrt_ground_plane(bundle)

  USE type_specifications
  USE general_module
  USE cable_module

  IMPLICIT NONE

! variables passed to subroutine

  type(bundle_specification_type),intent(INOUT)    :: bundle
  
! local variables

  integer    :: cable
  
  real(dp)   :: norm_x,norm_y
  real(dp)   :: p
  real(dp)   :: gp_offset
  real(dp)   :: gp_offset_cable_1
  
! START

! calculate the ground plane normal direction

  norm_x=bundle%ground_plane_nx
  norm_y=bundle%ground_plane_ny

! The equation of the ground plane is r.norm-P=0, calculate P here  
  P=bundle%ground_plane_x*norm_x+bundle%ground_plane_y*norm_y

! loop over all of the cables, calculating the offset from the ground plane in the normal direction
! offset=r.norm-P, and check that all offsets have the same sign

 if (verbose) then
   write(*,*)'Checking the orientation of cables wrt the ground plane'
   write(*,*)'GP normal:',norm_x,norm_y
   write(*,*)'GP offset:',bundle%ground_plane_x+bundle%ground_plane_y
   write(*,*)'P=',P
 end if

  do cable=1,bundle%n_cables_without_ground_plane
  
    gp_offset=bundle%cable_x_offset(cable)*norm_x+bundle%cable_y_offset(cable)*norm_y-P
    
    if (verbose) then
      write(*,*)'Cable',cable,' offset',gp_offset
    end if
    
    if (cable.EQ.1) then
    
      gp_offset_cable_1=gp_offset
      
    else
! check consistency of ground plane offsets

      if (gp_offset_cable_1*gp_offset.LE.0d0) then
        run_status='ERROR there are cables both sides of the ground plane'
        CALL write_program_status()
        STOP 1
      end if
          
    end if  ! cable.NE.1
    
  end do  ! next cable to check
  
  if (gp_offset_cable_1.GT.0d0) then
    bundle%ground_plane_cable_side=1
  else
    bundle%ground_plane_cable_side=-1
  end if
  
  RETURN

  END SUBROUTINE check_cables_wrt_ground_plane
!
! NAME
!     SUBROUTINE check_cable_intersections
!
!     check that the cables do not intersect
!     the intersection test checks intersection of the outer shape of each cable
!     which is usually the outer dielectric layer apart from overshields or D connectors which
!     are assumed not to have dielectric
!     
! COMMENTS
!     Revised to work with all cable types
!
! HISTORY
!    started 8/10/2016 CJS
!
!
  SUBROUTINE check_cable_intersection(bundle)

  USE type_specifications
  USE general_module
  USE cable_module

  IMPLICIT NONE

! variables passed to subroutine

  type(bundle_specification_type),intent(IN)    :: bundle
  
! local variables

  integer    :: cable1,cable2
  integer    :: nec1,nec2,ec1,ec2
  
  integer    :: shape1,shape2
  integer    :: type1,type2
  
  real(dp)   :: ox,oy,theta
  real(dp)   :: r

  real(dp)   :: wd,hd
  integer    :: nc,ncrow(2)
  real(dp)   :: rw,p,s,o,W(2)
  
  integer :: npts1
  real(dp),allocatable :: shape1_x(:)
  real(dp),allocatable :: shape1_y(:)
   
  integer :: npts2
  real(dp),allocatable :: shape2_x(:)
  real(dp),allocatable :: shape2_y(:)

  logical :: intersect
  logical :: intersect2
  logical :: nested_1_in_2
  logical :: nested_2_in_1
  logical :: gp_intersect
  
  logical :: intersection_found
  
! START

  intersection_found=.FALSE.

! loop over cable 1
  do cable1=1,bundle%n_cables_without_ground_plane
  
    ox=bundle%cable_x_offset(cable1)
    oy=bundle%cable_y_offset(cable1)
    theta=bundle%cable_angle(cable1)
    type1=bundle%cable(cable1)%cable_type
    
44c11f06   Chris Smartt   Include software ...
895
896
    if ((bundle%cable(cable1)%cable_type.NE.cable_geometry_type_flex_cable).AND. &
        (bundle%cable(cable1)%cable_type.NE.cable_geometry_type_ML_flex_cable) )  then
886c558b   Steve Greedy   SACAMOS Public Re...
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
      nec1=bundle%cable(cable1)%n_external_conductors
    else
      nec1=1
    end if
    
! loop over the external conductors of cable 1
    do ec1=1,nec1
    
      shape1=bundle%cable(cable1)%external_model(ec1)%conductor_type
         
! generate a list of points on cable 1 outer surface
      if (shape1.EQ.rectangle) then
    
        wd=bundle%cable(cable1)%external_model(1)%dielectric_width
        hd=bundle%cable(cable1)%external_model(1)%dielectric_height
        CALL generate_rectangle_points(npts1,shape1_x,shape1_y,ox,oy,theta,wd,hd)
      
      else if (shape1.EQ.circle) then
    
        r=bundle%cable(cable1)%external_model(ec1)%dielectric_radius
        CALL generate_circle_points(npts1,shape1_x,shape1_y,ox,oy,r)
     
      else if (shape1.EQ.Dshape) then
    
        nc=bundle%cable(cable1)%tot_n_conductors 
        rw=bundle%cable(cable1)%parameters(1)
        p=bundle%cable(cable1)%parameters(2)
        s=bundle%cable(cable1)%parameters(3)
        o=bundle%cable(cable1)%parameters(4)
        ncrow(1)=nc/2
        ncrow(2)=(nc-1)-ncrow(1)
        w(1)=(ncrow(1)-1)*p
        w(2)=(ncrow(2)-1)*p
        CALL generate_Dshape_points(npts1,shape1_x,shape1_y,ox,oy,w(1)/2d0,w(2)/2d0,s/2d0,rw+o,theta)
      
      end if
          
      if (bundle%ground_plane_present) then
! check for intersection of the cables with the ground plane
        gp_intersect=.FALSE.
        
        if (verbose) write(*,*)'TESTING: intersection of cable',cable1,' with the ground plane'

        CALL gptest(npts1,shape1_x,shape1_y,gp_intersect)

        if (gp_intersect) then
          if (verbose) write(*,*)'Cable ',cable1,' intersects the ground plane'
          intersection_found=.TRUE.
        end if
              
      end if
      
! loop over cable 2
      do cable2=cable1+1,bundle%n_cables_without_ground_plane
  
        ox=bundle%cable_x_offset(cable2)
        oy=bundle%cable_y_offset(cable2)
        theta=bundle%cable_angle(cable2)
        type2=bundle%cable(cable2)%cable_type
    
44c11f06   Chris Smartt   Include software ...
957
958
        if ((bundle%cable(cable1)%cable_type.NE.cable_geometry_type_flex_cable).AND. &
            (bundle%cable(cable1)%cable_type.NE.cable_geometry_type_ML_flex_cable) )  then
886c558b   Steve Greedy   SACAMOS Public Re...
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
          nec2=bundle%cable(cable2)%n_external_conductors
        else
          nec2=1
        end if
    
! loop over the external conductors of cable 2
        do ec2=1,nec2

          shape2=bundle%cable(cable2)%external_model(ec2)%conductor_type
         
! generate a list of points on cable 1 outer surface
          if (shape2.EQ.rectangle) then
    
            wd=bundle%cable(cable2)%external_model(1)%dielectric_width
            hd=bundle%cable(cable2)%external_model(1)%dielectric_height
            CALL generate_rectangle_points(npts2,shape2_x,shape2_y,ox,oy,theta,wd,hd)
      
          else if (shape2.EQ.circle) then
    
            r=bundle%cable(cable2)%external_model(ec2)%dielectric_radius
            CALL generate_circle_points(npts2,shape2_x,shape2_y,ox,oy,r)
     
          else if (shape2.EQ.Dshape) then
    
            nc=bundle%cable(cable2)%tot_n_conductors 
            rw=bundle%cable(cable2)%parameters(1)
            p=bundle%cable(cable2)%parameters(2)
            s=bundle%cable(cable2)%parameters(3)
            o=bundle%cable(cable2)%parameters(4)
            ncrow(1)=nc/2
            ncrow(2)=(nc-1)-ncrow(1)
            w(1)=(ncrow(1)-1)*p
            w(2)=(ncrow(2)-1)*p
            CALL generate_Dshape_points(npts2,shape2_x,shape2_y,ox,oy,w(1)/2d0,w(2)/2d0,s/2d0,rw+o,theta)
      
          end if

! assume that there is no intersection and the shapes are not nested

          intersect=.FALSE.
          nested_1_in_2=.FALSE.
          nested_2_in_1=.FALSE.
          
! check for the intersection of cable 1 with cable 2 and flag if cable 1 is nested within cable 2.
        
          if (verbose) write(*,*)'TESTING: intersection of cable',cable1,' with cable ',cable2
          CALL shape_test(npts1,shape1_x,shape1_y,npts2,shape2_x,shape2_y,intersect,nested_1_in_2)

          if (intersect) then
            if (verbose) write(*,*)'Cable ',cable1,' intersects Cable',cable2
            intersection_found=.TRUE.
          end if

! Cables can only be nested if the outer cable is an overshield
          if ( nested_1_in_2 ) then
            if (type1.NE.cable_geometry_type_overshield) then
              if (verbose) write(*,*)'Cable ',cable2,' is inside Cable',cable1
              intersection_found=.TRUE.
            else
               if (verbose) write(*,*)'Cable ',cable2,' is OK inside Overshield Cable',cable1
            end if
          end if

! check for the intersection of cable 1 with cable 2 and flag if cable 1 is nested within cable 2.

          if (verbose) write(*,*)'TESTING: intersection of cable',cable2,' with cable ',cable1
          CALL shape_test(npts2,shape2_x,shape2_y,npts1,shape1_x,shape1_y,intersect2,nested_2_in_1)

          if (intersect) then
            if (verbose) write(*,*)'Cable ',cable2,' intersects Cable',cable1
            intersection_found=.TRUE.
          end if

! Cables can only be nested if the outer cable is an overshield          
          if ( nested_2_in_1 ) then
            if (type2.NE.cable_geometry_type_overshield) then
              if (verbose) write(*,*)'Cable ',cable1,' is inside Cable',cable2
              intersection_found=.TRUE.
            else
              if (verbose) write(*,*)'Cable ',cable1,' is OK inside Overshield Cable',cable2
            end if
          end if
          
          DEALLOCATE( shape2_x )
          DEALLOCATE( shape2_y )
                           
        end do ! next external conductor of cable 2
               
      end do ! next cable 2  
          
      DEALLOCATE( shape1_x )
      DEALLOCATE( shape1_y )
    
    end do  ! next external conductor of cable1
  
  end do  ! next cable1
  
  if (intersection_found) then
    run_status='ERROR there are cables in the bundle which intersect'
    CALL write_program_status()
    STOP 1
  end if
    
  RETURN

  END SUBROUTINE check_cable_intersection
!
! NAME
!     SUBROUTINE gptest
!
!     check that a cable does not intersect the ground plane
!     
! COMMENTS
!     
!
! HISTORY
!    started 20/4/2017 CJS
!
!
SUBROUTINE gptest(npts,shape_x,shape_y,gp_intersect)

USE type_specifications

IMPLICIT NONE

integer,intent(IN) :: npts
real(dp),intent(IN) :: shape_x(npts)
real(dp),intent(IN) :: shape_y(npts)

logical,intent(OUT) :: gp_intersect

! local variables

integer :: i

! START

do i=1,npts

  if (shape_y(i).LE.0D0) then
    gp_intersect=.TRUE.
    RETURN
  end if

end do ! next point

RETURN

END SUBROUTINE gptest
!
! NAME
!     SUBROUTINE shape_test
!
!     check that cables do not intersect, also flag whether the first cable is nested 
!     i.e. lies entirely within the second
!     
! COMMENTS
!     We assume that the shape of the cable is convex and that the shape is closed
!
! HISTORY
!    started 20/4/2017 CJS
!
!
SUBROUTINE shape_test(npts1,shape1_x,shape1_y,npts2,shape2_x,shape2_y,intersect,nested)

USE type_specifications

IMPLICIT NONE

integer,intent(IN)  :: npts1
real(dp),intent(IN) :: shape1_x(npts1)
real(dp),intent(IN) :: shape1_y(npts1)

integer,intent(IN)  :: npts2
real(dp),intent(IN) :: shape2_x(npts2)
real(dp),intent(IN) :: shape2_y(npts2)

logical,intent(OUT) :: intersect            ! flag to indicate that shapes 1 and 2 intersect
logical,intent(OUT) :: nested               ! flag to indicate shape 2 lies within shape 1

! local variables

integer :: i,j

real(dp) :: vx1,vy1
real(dp) :: vx2,vy2
real(dp) :: vp
real(dp) :: dirn

logical :: inside_point_found
logical :: outside_point_found

logical :: local_outside_point_found

! START

intersect=.FALSE.
nested=.FALSE.

inside_point_found=.FALSE.
outside_point_found=.FALSE.

! loop around test points in shape 2
do j=1,npts2

  local_outside_point_found=.FALSE.

  dirn=0.0  ! set to zero initially to indicate that it is not known
  
! loop around line segments in shape 1. Note there is one less line segment than the number of points
  do i=1,npts1-1

! vector along line segment in shape 1
    vx1=shape1_x(i+1)-shape1_x(i)
    vy1=shape1_y(i+1)-shape1_y(i)
    
! vector from first point in line segment to test point
    vx2=shape2_x(j)-shape1_x(i)
    vy2=shape2_y(j)-shape1_y(i)
    
! calculate the z component of the vector product of the two vectors
    vp=vx1*vy2-vx2*vy1
    
    if (dirn.EQ.0D0) then    ! maybe we need to use abs(dirn).LT.small here...
    
! this is the first value so this sets the direction to test for all other sets of points

      dirn=vp
      
    else
    
! test whether the sign of the direction has changed

      if (dirn*vp.LT.0.0) then
      
! the signs are different then this indicates a test point outside shape 1
  
        local_outside_point_found=.TRUE.
      
      end if  ! change in sign of direction
      
    end if  ! first test line segment.

  end do  ! next line segment in shape 1
  
  if (local_outside_point_found) then
    outside_point_found=.TRUE.
  else
    inside_point_found=.TRUE.  
  end if

end do ! next test point in shape 2

! work out whether we have an intersection

if (inside_point_found.AND.outside_point_found) intersect=.TRUE.
  
! work out whether we have a nested shape

if (inside_point_found.AND.(.NOT.outside_point_found)) nested=.TRUE.

RETURN

END SUBROUTINE 

END MODULE cable_bundle_module